Find a trusted local electrician in Yanchep

I need a heat pump dyer stacked onto my washer. The stack plate is already installed. It needs a two peron lift and some tools - Due date: Before Monday, 13 February 2023

I need a feature wall in my lounge to house a tv of 190 w x 110mm high Dimplex 74 inch prism heater 88.3 cm w x 49.3h x 17.9 d cm Soundbar is about 1m - Due date: Before Tuesday, 14 February 2023

Someone to put up Christmas lights for us - Due date: Before Saturday, 10 December 2022

Looking for someone to install 2 x 300mm round standard skylights Not in a hurry, tiled roof single story - Due date: Flexible

We are installing a pool in our front yard (Sep-Oct) and need to change from overhead power connection to underground. House is 10.5m from boundary (sandy soil, no rocks) Current meter box is 12m from future power connection point. Current meter box could be retained as a circuits board and only Western Power meter in new location or all circuitry moved. Current board is asbestos and could be replaced or simply left in place if all circuitry is moved. There is potentially a 2-3 month lead time with Western Power, we would like to make out submission to them by the end of May. If you include any Western Power fees in your quote, please state that clearly so that we can make a fair comparison between offers. The scale on the hand drawn picture is each square represents 500mm. Items relevant to electrical work are highlighted in yellow. - Due date: Before Wednesday, 31 August 2022

installed about 4 years ago when on faster power is vibrating ;pwer speeds are okay butI am concerned if not secure - Due date: Flexible

I would like 2 plug points installed on my kitchen bench top

Require 4 front external lights swapped over to up down lights. Lights already supplied just need installation. Also swap one light fitting to alfresco area.

The aircon have an error code "ch 67"

3x2 Looking for fully ducted reverse cycle

Electrical compliance certificate

I need 2 plug points installed on my kitchen bench top

I am in yanchep and need a light repaired and a new aerial installed to a motor home Possible other jobs to be done also

i installed a new 48v 1200w 15ah tiger shark battery on my 1000w diy ebike, wouldn’t turn on so i checked all connections & the cables on the supplied xt90 were on the opposite terminals, so i desoldered & soldered back to the correct terminal & the display still won’t turn on, my soldering skills are a little rusty but they seemed strong enough and far as i know all julet connectors are fine but the display still won’t turn on. i think the controller could of been fried because of the polarity running the wrong way but there was no smoking or any visual signs of damage.

Needing power points and antenna moved higher up the wall so TV can be mounted on wall attached picture

I have a rental and I need a 2nd smoke alarm installed please

Need an electrician to set up a ethanet port from the living room to the room behind it.

need fan/light replaced in main bathroom, fans stopped working. Already have a replacement.

I need 10 lights fitted with hanging pendant shades. Will I need an electrician for that