Find trusted local electricians in Illawarra

We have replaced the control panel and power supply. The suana is still not turning on. There is no power getting to the board. We suspect the fuse so hopefully it’s a matter of replacing the fuse. The boards in top of the Sauna need to be checked and if the fault still exists please confirm where the fault is. So this job is to replace the fuse and place cover on main box and check it’s safe, if still not working then report findings. *the fuse has been supplied.

Requiring a licenced electrician

The fan stopped working. Need to check and fix/replace.

Hi, I’m looking for a licensed electrician to inspect the existing dedicated cooker circuit at my home in Berkeley NSW. I’m planning to install a Westinghouse WFE9516DD 90cm dual-fuel freestanding cooker, which has a maximum current of approximately 17.9A and requires a hardwired electrical connection. The existing cooker circuit currently has a C16A circuit breaker. I’d like the electrician to: * Inspect the existing cable and dedicated circuit * Confirm whether the existing cable can be safely reused or needs to be replaced * Upgrade the circuit if required, including the appropriate circuit breaker/RCBO and cable * Install an isolation switch/connection as required * Connect and commission the cooker * Carry out all required testing * Provide the required electrical compliance certificate Please provide a fixed-price quote including labour and materials, and clearly advise whether the existing cable can be reused or needs to be replaced. Licensed and insured electricians only, please. Thanks!

Install a new light/fan where there is currently only a light fitting. Check downlights in bedroom that are not working.

I have some old light switches with dimmers that need changing out. Also have normal light switches that need changing out. Also some down lights. High ceilings

Noisy pipes when hot water first turned on. Water is hot. Not interested in replacement heater

Urgent attendance required TODAY – Towradgi NSW. Looking for a licensed and insured electrician who can attend today to assess and, where possible, complete several electrical works at an Airbnb/short-term accommodation property. Works required: Cleaner/storage cupboard Existing power point inside the cupboard, however there is currently no power running to it. Light needs to be installed. Please assess what is required to provide power and install the light/switch, including whether a new circuit is required. External/front light One front external light is not working – investigate and repair/replace as required. Bedroom downlight One bedroom downlight is not working and is believed to be hardwired – investigate and repair/replace as required. External sensor lights Inspect the external sensor lights around the property. Currently only one of the front sensor lights appears to be operating. Investigate the remaining lights and repair where possible. Please only make an offer if you are a licensed electrician and can attend TODAY. Please advise your earliest available attendance time today. Any additional works or materials identified onsite are to be quoted and approved before proceeding.

Seeking a fully licensed electrician who operates with an apprentice or a trade assistant to swap out a wall-mounted 3-door LED shaving cabinet due to a factory defect. The current unit is already mounted with trade prep partially completed. Because of the size and glass faces, it is heavy and strictly requires a two-person lift to dismantle and maneuver. (Only the lead contractor needs to be a licensed electrician). Scope: 1. Dismantle & Unmount: Safely disconnect and remove the defective cabinet from the wall. 2. Mount Replacement: Lift and secure the new replacement cabinet into the existing setup. 3. Connect Electrical: Run the electrical lead inside the cabinet to complete the connection safely. Required Traits: - High Quality: Fragile premium mirror faces require absolute precision and care. - Clean & Tidy: Must clean up all trade dust and packaging materials. - Patient: Delicate job that cannot be rushed. Compliance Note: The new unit arrives at the end of the month and stays sealed until you arrive to inspect it with me. The electrician must hold a verified Airtasker Electrical Badge. Required upon completion: Formal itemised Tax Invoice (with ABN) and a Certificate of Compliance (CCEW) for my active NSW Fair Trading file. Please reply with your total quote

Need someone to install a batten light and to disconnect and connect a new upright cheap stove

Remove and replace batteries for 1 smoke alarm (beeping at the moment) Please include supply batteries on your offer.

Replace old light switches with new ones straight swap out which I have around 10 total. I will supply switched

Licensed and Insured Electrician required to install downlights (3bd house) and a split-system air conditioner (main bedroom). Important SMSF requirements: This work is for an SSMSF investment property. To be assigned, you must be a registered business, provide a formal pdf tax invoice made out to our SSMSF Trust, hold an active ABN, hold a current NSW Electrical License, and have a valid ARC Ticket/Licence for the A/C gas lines. Please do not apply if you cannot provide a Certificate of Compliance (CCEW) upon completion.

Electrician asap for tracking lighting install

I have 17 hard wired down lights that I need converted to plug in. I’ll supply the single power outlets. I’ll also install the new down lights myself. Also need 1 x 4 button light switch installed which I’ll supply as well.

Offers welcome. Please inbox. Looking for a licensed electrician to install 2 × Geely 7kW single-phase EV chargers at two separate residential properties, Cringila and Albion Park (20 minutes distance from each other) Both chargers are supplied and ready to install. At both locations, the charger will be mounted very close to the switchboard, so only a short cable run is required. Photos of both switchboards will be attached. Looking for a straightforward, compliant installation including required circuit protection, cabling, mounting and testing. Please quote for both installations.

Looking for an electrician for TV wall mounting, with all cables concealed for a clean finish and new PowerPoint. I already have the new 75-inch Hisense TV and Sanus fixed wall bracket, both pictured. The TV currently sitting on the cabinet is being replaced. Work required: 1. Install a new double power point behind the TV cabinet, concealed from view. There is an existing power point nearby on the adjoining wall—see photos. Please leave that existing outlet in place. 2. Install a new power point behind the wall-mounted TV, properly wired and positioned so the outlet and plug do not interfere with the fixed bracket. 3. Supply and install one quality HDMI cable concealed inside the wall, running from behind the TV down to behind the cabinet, with neat cable pass-through/brush plates at both ends. 4. Install the supplied bracket and mount the new TV, securely fixed to suitable wall structure, level and at an agreed height and position. Connect and test everything. Please include any additional person needed to lift and mount the TV safely. The aim is no visible hanging cables, extension leads across the floor or exposed surface conduit. Wall construction and the best concealed wiring route will need to be confirmed. Please quote for the complete job, including labour, electrical materials, HDMI cable, wall plates, fixings, any applicable GST and your Airtasker fees. TV and bracket are supplied by me.

There is a Redback battery that needs replacing of the comms board that helps with connecting it to wifi. Redback has sent the board and it’s on site. Need an electrician to help installing it

Hi Just require an electrician to help install and interconnect x1 smoke alarm to the rest of the smoke alarms. I have the smoke alarm device. Job in Horsley Thanks Time is flexible

3 (existing) 20a power outlets are currently sharing a single circuit breaker Each outlet needs to be connected to its own (existing) 20A breaker Will require new conduit to be installed between breaker and outlet (roughly 6m)