Find trusted local electricians in South Moreton Bay

Need a quote for an electrician to change current guest bathroom exhaust fan/light into separate exhaust fan and 2 down-lights and 1 exhaust fan/light in guest toilet into separate downlight and exhaust fan

4 x light switches with fans 1 x double switch 1 x tripple switch 4 X plug in switch

Need light switches and switches replaced in house

Not sure why my power trips need a check

I have a Mitsubishi Electric MSZ-GA25VA split system (about 2.5 kW). When I turn it on, the indoor unit starts normally and blows air. The outdoor unit fan also starts, but it stops after about 10 seconds. After that, the indoor unit continues blowing for a short time and then shuts down, and the Operation light flashes 5 times repeatedly. I already tried turning the power off at the breaker for about 5 minutes to reset it, but the problem remains. Need someone to visit and repair it.

I would like install x4 split aircon in the spare room

i need to install around 5x new downlights and 2x new light fitting points and an extra switch.

Install 5 brand new smoke alarm in 5 bedroom and there are no alarm in the bedroom now!

Hi, I’m looking to engage a licensed electrician for 1.5 - 2 full 8-hour days. Labour only, materials reimbursed. Mix of small installs and tidy-up work. 1. Remove 21 halogen downlights and replace with owner-supplied Hue LED Akari downlights 2. Replace 5 ceiling fans (owner supplied) 3. Replace existing garage light with owner-supplied LED strip 4. Install 2 owner-supplied Hue floodlights (front and rear exterior) 5. Install new circuit at switchboard for new downlight configuration 6. Replace bathroom light/exhaust fan (owner supplied)

Replacing a gate motor. Just need the 240 disconnected and reconnected with new system

2.5kw spilit system air conditioner installation in single story house

Task description: I have a broken ceramic/glass electric cooktop that needs removal and replacement. I will purchase the new cooktop . I just need a licensed electrician to: • Disconnect and remove old cooktop • Install and connect the new one • Test and ensure it is safe and compliant Photo attached. Please provide licence details and availability.

I need a licensed electrician to supply and install a power circuit for new oven and induction cooktop and kitchen. Also need four new powerpoints installed in the kitchen.

Installing a Aluminium Free standing Pergola close to pool that requires Earthing / Bonding

We need an electrician to disconnect and remove a stove top and oven prior to us removing kitchen cabinetry. Must be completed either early Monday morning before 0730. Ferny hills

Hot water is currently on controlled load circuit. Need to change to general cicuit

Standard install of 2.6 kw split aircon in small bedroom. I provide the unit.

Hello, We are looking for a licensed QLD electrician to attend our retail store, in Strathpine Centre, to repair multiple faulty downlights (4) in our optometry room. The Issue: The lighting in our optometry room has failed. One recessed LED downlight is completely out, and at least one other is flickering. This has made the room too dark and the flickering is very off-putting, affecting our ability to conduct eye tests properly. The Job: The task is to diagnose and repair the faulty downlights to restore full and stable lighting. The scope of work includes: 1. Safely accessing the light fittings in the ceiling (a suitable ladder is required). 2. Diagnosing the cause of the faults (e.g., failed LED units, faulty drivers, a loose connection, or a dimmer issue). 3. Supplying and installing new replacement parts as needed. This will likely involve replacing at least two LED downlights and/or their drivers. 4. Ensuring all new lights match the existing ones in colour temperature and brightness. 5. Testing the lights thoroughly to confirm they are all working correctly without any flickering. There are 4 downlights altogether. Requirements: - MUST be a fully licensed and insured QLD Electrician. - You must have your own tools, including an A-frame ladder suitable for a standard commercial ceiling. - Experience with diagnosing faults in commercial LED lighting systems is essential. - The contractor must be able to supply the necessary replacement downlight fittings. Location & Timing: Location: Strathpine Centre, 295 Gympie Rd, Strathpine QLD 4500 (Exact location will be provided upon acceptance of the offer). When: Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying two new standard LED downlight fittings. Thank you.

TV wall mount (bracket supplied). Jobs: Supply of the downlights and 1 switch x 5(3 outdoors(or 1 flood light) and 2 indoors. I can supply the downlights if you provide me with the details of what to buy for the job.

Hello, We require an call-out from a licensed QLD Electrician to repair a broken and hazardous light dimmer switch at our retail store, in Strathpine. The Issue: The rotary dimmer knob in our main optometry room has broken off. The entire dimmer mechanism and its associated wiring have now fallen back inside the wall cavity. This is a significant electrical hazard and a major operational problem, as our optometrists cannot adjust the lighting for eye examinations. The lights are stuck at half brightness. The Job: The task is to safely retrieve the wiring and install a new dimmer switch. The scope of work includes: 1. Safely isolating power to the circuit. 2. Carefully retrieving the electrical wiring from inside the wall cavity. 3. Supplying and installing a new, standard rotary dimmer switch mechanism and faceplate. 4. Ensuring the new dimmer is wired correctly and securely mounted. 5. Testing the lights to confirm that the new dimmer switch functions correctly and provides a full range of brightness. Requirements: - MUST be a fully licensed and insured QLD Electrician. - You must have your own diagnostic tools and be able to supply a new standard dimmer switch. Location & Timing: Location: Strathpine Centre, 295 Gympie Rd, Strathpine QLD 4500 (exact location will be provided once the task is assigned) When: As this is an operational and safety priority, we need this repair completed as soon as possible. Please state your earliest availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include your call-out fee, all labour, and the cost of supplying the new dimmer switch. Thank you.