Find local downlights installers in Melbourne

Swap current SURFACE 150MM LED CCT W/S DIM IP44 DL WH for pendant image attached of both Preferably between 10-11:30 or 1-3

Replace 2 LED track down lights on 4.5m high ceiling in a commercial property.

Install 3x ceiling fans (remote controlled with LED lights), one in living room and one in each bedroom, plus 2x downlights in living room. All installs are replacing existing lights. Buildings is a 1960s brick flat with ceiling access next to the front door

Bathroom has 3 ceiling downlights with old 26W GX24q-3 CFL bulbs. Bulbs are difficult to remove due to deep fittings. I need an electrician to supply suitable replacement bulb(s), remove all existing bulbs, and install new ones. Alternatively if there are other solutions to upgrade lighting please let me know. Total: 3 bathroom lights.

The lighting in the bathroom is not working properly – it has become very dim, flickers frequently- see attached pictures. Need someone to check the 2 down lights (light bulbs) and replace if need be in the bathroom.

I have 4 downlight in a room that has high ceiling (~4 metres) that needing replaced. It is a normal plug downlight. I will supply the downlight but you need to bring the suitable platform ladder

Supply and replace cool white downlight bulbs x 2

The lights dangling. I tried replacing the bulb but it still won’t turn on.

Looking for a licensed electrician to fix one LED downlight in a bedroom. The globe has already been replaced but the light still doesn’t work.

⚫️15 lights ⚫️ 3 bedroom, 2 bathroom & laundry room ⚫️ can bring your own down lights or I can get them, flexible

We're preparing our 3 storey townhouse for sale, with a first inspection happening this Saturday Jan 24th. I've been replacing our smart MR16 GU10 downlight lightbulbs with basic warm white LED equivalents. There are two problems: 1. There is a set of four downlights on level two controlled with the same light switch, one of which is NOT GU10, but rather GU5.3. It had an old 12V 50W bulb in there, which was working but didn't match the colour temp of the replacement bulbs for the other three GU10 downlights in the set. I took it out and replaced with a GU5.3 5W LED bulb, but it failed to light up. Returned the original bulb to the socket and now it also fails to light up. Hoping to figure out what's wrong with the fitting and get it working before the first inspection on Saturday, if possible! 2. Also on level two, a MR16 GU10 downlight from another set is stuck, with the inner fitting refusing to budge when torque is applied. I figure I can still replace the bulb if I can get the whole housing out of the ceiling, but I know with the spring clips I run the risk of tearing a hole in the ceiling plaster as it comes out. This one isn't really critical, because the bulb in there is still working, but in an ideal world I could swap the bulbs without destroying my ceiling in the process.

Looking for registered electrician to replace power points and a few downlights in an apartment. Flexible time.

I have a couple of down lights in 2 rooms Need to add 2 more off the same switch

I require a qualified electrician to fix a total of 4 down lights in my property. I have five total downlights that require fixing; three downlights are connected to each other in the hallway (2 small and one standard) and all three use the same 2 light switches. The other two downlights are separate. One is on a ceiling approx 3 meters high, so a ladder is required. The globes on the downlights have been replaced and the lights are still not working, therefore maybe a wiring/transformer issue. Qualified/licensed electricians only please.

The lighting in the bathroom is not working properly – it has become very dim, flickers frequently- see attached pictures. Light switch has pushed in needs to be opened and reset again Need someone to check the 2 down lights (light bulbs) and replace if need be in the bathroom.

Quick job – Replace 3 ceiling downlight bulbs – Wed night (I pay for new bulbs) Description: Hi everyone, Super easy 10–15 minute job. I need someone to: 1. Remove 3 old recessed downlight bulbs (see photo – standard GU10 or MR16/GU10 fitting) 2. Buy 3 new ones (I’ll pay for the bulbs 100% – just get the receipt) 3. Pop the new bulbs in Location: Southbank When: Wednesday evening (after 3:30pm)

⚡ Licensed Electrician Required (November 17th Start) Qualified competent electrician required to carry out works in a 3-level townhouse located in Richmond. Looking for sensible quotes for all of the below. I'd love to have a run through the house asap to discuss the job first. Scope of Works: 💡 Replace 54 x 70mm halogen down lights with Philips 90mm LED units (or similar). Includes removal of existing fittings (all old for new - no new connections required), cutting new holes (new LEDs will be 90mm) and replacing transformers with 3-pin plug connections. 𖣘 Install 2 ceiling fans in bedrooms 💡 Replace 6 step lights (simple in-wall replacements for LED's). 🔌 Replace all existing Clipsal Classic switches - some dimmers - and sockets with Clipsal Iconic equivalents - some with USB-C. Switches / Sockets to be Installed 9 × 1-gang switch 5 × 2-gang switch 2 × 3-gang switch 1 × 4-gang switch 3 × single socket 5 × double socket 8 × double socket with USB-C 4 × TV / phone combo outlets Notes: All fittings and units supplied by me. Work to be scheduled for 17th November commencement pending painter finishing up. Must be fully licensed and insured.

Supply and install downlight. Diameter of the hole on ceiling is 9.5cm. No socket plug ready.

There are 4 downlights in the dining room of my rental that I want unplugged. They are in the ceiling which is ~3.6 metres high, so needs a very tall ladder to reach.

Change light bulbs for down lights in end of lease Cost of bulbs included in budget 3 X lights Ladder needed