Find trusted local electricians in Sunshine Coast

**Budget is flexible - Not sure what an appropriate starting point was for Airtasker** Looking for a licensed electrician in Currimundi to replace six existing ceiling lights and install an industrial exhaust fan in a shed. Timing is very flexible, including weekdays. Happy to work around your existing schedule. I work from home so generally have availability if you want to visit before quoting. 1. Replace 7 existing lights - 4 under a covered outdoor area, 2 inside a metal shed, 1 on front porch. - All except front porch are currently integrated LED batten-style fittings (photos attached). - I want these replaced with fittings that accept standard, replaceable light bulbs (e.g. T8 tube batten). Front porch light to be replaced with motion sensor floodlight. - Electrician to supply suitable fittings with appropriate weather resistance for each location. - Existing wiring and mounting locations to be reused where practical. 2. Install industrial wall exhaust fan - Install an exhaust fan high on the rear wall of the shed to extract hot air and keep airflow moving through shed. -Proposed location marked in green the attached shed photo, subject to your recommendations. - Installation will require cutting a new opening in the wall, mounting the fan, weatherproofing, and completing the necessary wiring and switching. - I'm planning to supply this Fanmaster industrial wall exhaust fan, but I'm happy to take advice on the most suitable size or an alternative model before purchasing. https://www.cltoolcentre.com.au/fanmaster-iwel400-wall-exhaust-louvred-fan.html Other details: - Very flexible with dates and times. - Clear working access will be provided to all locations. Please include labour, six new light fittings and any other installation materials in your offer (excluding the exhaust fan, which I'll supply). An itemised breakdown for the lighting and exhaust fan work would be appreciated. Thanks!

We have an outside cabana that already has two GPO’s. We would like another two. They only need to be 1m from the existing points. We have another in the house on a wall needs installing 1m higher than where it is currently. Super easy job for an experienced electrician.

Replace 3 x ceiling fans Fans will be supplied Also replace 2 x light switches a d remove 1 x kitchen fluro and replace with Ikea downlights

Hello, We are looking for a qualified and licensed electrician to inspect and repair the flickering illuminated signage at our Kawana store. Scope of work: - Inspect the illuminated signage to identify the cause of the flickering - Diagnose and repair and electrical faults. - Test the signage to ensure the lighting is working correctly and consistently. - Advise is any replacement parts or additional works are required. Requirements: - Must hold valid electrical licence - Must have experience with illuminated signage or commercial lighting. - Must bring their own tools and equipment. Important notes: - Please provide your quotation, including call-out fees. - Any additional works or replacement parts must be quoted and approved before proceeding. - Please let us know your earliest availability. I am unable to attach the video but have a photo provided below.

A/c Fan Blower fuse has melted in the fuse box. Not worried about fixing the fuse box. Happy to have it alternatively wired. Just want it to work.

Looking for a qualified electrician. Needing a circuit run for an oven and stove top (unsure if this needs to be two seperate circuits). And also relocating a power point for range hood. Must be licensed and able to provide the required electrical compliance documentation

I have a pokie machine that has stopped working and the language is stuck in Chinese. A wire is broken also which will need soldering

I'm looking for a licensed air conditioning technician to relocate the outdoor condenser unit of our existing LG ducted air conditioning system. The system was installed in September 2020 and is working perfectly. I need the outdoor unit moved approximately 6 metres around the corner of the same house, ideally wall-mounted beside the hot water system. The indoor ducted system will remain unchanged. The job will involve extending the necessary pipework and electrical connections, relocating the unit and recommissioning the system. Located in Golden Beach, Sunshine Coast. Photos available showing the current location and proposed new location.

I need a new power point in the center of the garage ceiling to plug in the power for a new garage door motor. There is an existing power point on the left wall in the garage for the current garage motor, but the new motor needs a power point in the center of the ceiling because I am switching from a roller door to sectional panel door. The garage door installer mentioned that the power point needs to be center of the ceiling, approximately 3.4m back from the center of the garage opening. Attached some pictures for your reference. 1st picture you can see the existing power point in the top right corner.

Require a qualified electrican to replace batten lights and install 2x pendant lights above kitchen island 2x pendant lights in main bedroom 1 pendant light in toilet power room. 2 x outdoor wall lights, j boxes currently installed. 1 led mirror installed above vanity in main bedroom on tiles. J boxes currently installed

Install Tesla charging port in our garage. Must be qualified electrician. Thanks

Need a PowerPoint and NBN connection moved 600 mm up the wall in our kitchen.

Needing a power point to mount tv

Want to install a power point in living room and linen cupboard + fix a switch on a PowerPoint in bedroom and the switch on a 15amp plug in backyard (see images) Please make offer.

I have a smeg toaster that the cord thay the head needs to be replaced, as well as a Murphy Richards ice makers cords that need to be replaced. Cords are supplied to be fitted.

Hello, We require an URGENT call-out from a licensed QLD Electrician to address a hazardous light switch at our retail store, in Sunshine Plaza (Maroochydore). The Issue: This is a high-priority safety concern. A 3-gang light switch on our wall is faulty and making "zappy", "crackling", and "popping" noises when operated. It previously gave a minor electrical shock to a staff member. The bottom switch, which controls our main storefront entrance and side displays, has now failed completely, leaving our storefront signs unlit. The circuit has been switched off at the board for safety until an electrician can inspect it. The Job: The task is to make the switch safe and restore full functionality to our storefront lighting. The scope of work includes: 1. Safely isolating power to the circuit. 2. Inspecting the wiring behind the 3-gang switch plate to identify the cause of the sparking and popping. 3. Supplying and installing a new, standard white 3-gang wall switch plate and mechanisms. 4. Testing all three switches to ensure the main ceiling lights, downlights, and front display signs operate safely and correctly without any noise or fault. Requirements: - MUST be a fully licensed and insured QLD Electrician. - You must have your own tools and be able to supply a standard replacement 3-gang switch. Location & Timing: Location: Sunshine Plaza, 154-164 Horton Parade, Maroochydore, QLD 4558 When: URGENT. This is a safety hazard and is affecting our storefront presentation. Please state your earliest availability in your offer. Please provide a comprehensive quote for the complete job, including your emergency call-out fee, all labour, and the cost of supplying the new switch. Thank you.

The point plug switch works for two of the switches but not the oven switch

Electrical work required: * Recess 2 × TV double power points for flush TV mounting. * Recess 2 × TV antenna/data wall plates (TV antenna + Ethernet/data outlets). * Install 1 × new double power point in a bedroom. * Install/hang 1 × IKEA FILSIK 4-pendant light using the existing ceiling electrical connection (no new wiring required).

Buderim Licensed sparky needed tonight to isolate power to a kitchen ahead of demolition tomorrow morning. Includes 2 GPOs, oven, microwave, dishwasher, and fridge — need everything safely disconnected/made safe. ASAP tonight.

I need internet connected but need new power point to facilitate same . ? Unsure if electrician able to connect or whether I need to arrange someone else after power point updated .