Find trusted local electricians in South Adelaide

Temporary removal of power point required in Ensuit in preparation for wall removal by specialist contractor (fibreboard containing asbestos).

Install a new power cord for gas pump after the dog chewed it We do not have to replacement cord

We are looking for a professional to install a split air conditioner in our waiting room at the GP Clinic in Plympton Park. We want to install Daikin 9KV reverse cycle split unit. It is a new installation. The outdoor unit will go on the roof. Please send us the quotes for supply and installation.

I need a power point relocated to another area of the wall due to a wardrobe installation that will cover the current one. I also have a few other power points that need to be inspected as they buzz and short circuit during use sometimes.

Dimpled 74’’ electrical fireplace Niche is already made up by builder. But no outlets inside the niche but there is one closer

Diagnosis of electrical issue caused by termination of powerpoint. Suspected faulty circuit breaker fuse (‘dead short’) in fuse box or fuse itself, All appliances have been turned off/unplugged from circuit - breaker still won’t flick on. Terminated cable shows no issues when tested via multimeter.

Electrics for bathroom Wall is channeled already- just need electrician to put two power points and heat light in.

I got lan cable installed previously from one room to another but the wall sockets has telephone ports. I need to update the wall sockets to cat6 sockets. The cabling is anyway cat6.

SAPN power outage on the 4th Feb. Since then my downlights in lounge room and dining room are not working.

The car has a melted/burnt wiring connector (pins 5 & 6) causing an electrical fault. I have already purchased the replacement connector (pigtail harness). The job is to cut off the old damaged plug and properly splice the new connector onto the existing wiring (crimp/solder and heat shrink). Access is already available. Looking for someone experienced with automotive wiring

One of my rooms ceiling fan is not working and would like to replace it with newly purchased fan with remote. This is new fan - Lumio 1220mm 48" White Skylar DC 4-Bladed Ceiling Fan With RF Remote Control.

We have a sensor light in my mum’s carport that is not working and we’d like to get it fixed please.

I have a 200 L roof-mounted electric-boosted solar hot water system (3-phase). Currently, the heater turns on automatically whenever the water temperature drops, including during peak electricity periods. I’d like a licensed electrician to: -Install a time-controlled switch or contactor so the booster only heats during specified cheap electricity windows -Keep the existing thermostat and hot water functionality intact -Optionally add a manual override for occasional peak-time heating -Device cost on me

Move NBN box from bedroom to lounge and install new powepoint in lounge and powerpoint outside front of property

Old s.detector removed. New one needs connection. Hard wired. I have the new one here.

Water affected switch board needs reinstating and a check to see if it is safe to use or if a new mount is required

I need an electrician to replace an old warn out power point with a new power point that I purchased from Bunnings.

I have to cover up x4 light fittings with something. I don’t really mind what it’s is, as long as looks neat and easy to change light bulb.

Hello, We are looking for a licensed SA electrician to attend our retail store, in Westfield Marion, to diagnose and repair/replace a flickering ceiling light. The Issue: A recessed LED downlight in our optometry room is persistently flickering. This is a potential safety issue and is highly disruptive for our optometrists and patients during eye examinations. The Job: The task is to find the cause of the flickering and perform the necessary repair to ensure stable, constant light. The scope of work includes: 1. Safely accessing the high ceiling (approx. 4 meters). 2. Diagnosing the cause of the flickering (e.g., faulty LED unit, failing driver, loose connection, or dimmer incompatibility). 3. Supplying and installing a new, like-for-like replacement downlight fitting if the existing one is faulty. 4. Testing the light thoroughly to confirm the flickering is resolved and the dimmer function (if applicable) is operating correctly. Light Specification (for sourcing a match): Type: LED Downlight Deco, 13W Round, White, Dimmable, Warm White (from GoLights). See attached spec sheet. Requirements: - MUST be a fully licensed and insured SA Electrician. - You must have your own tools, including an appropriate tall A-frame ladder or platform suitable for working safely at a 4-meter height. - Experience with diagnosing faults in commercial dimmable LED lighting systems is essential. - The contractor must be able to supply the replacement downlight if required. Location & Timing: Location: Shop 1015, 297 Diagonal Rd, Oaklands Park, SA 5046 (exact location will be provided once the task is assigned). When: We need this fixed as soon as possible. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include your call-out fee, all labour, and the potential cost of supplying one new replacement LED downlight. Thank you.

A chandelier needs to be replaced in the entryway