Find trusted local electricians in South Adelaide

We have 9 wall sockets not working in Kitchen and surrounding, which all connects to one breaker on the switchboard. Changed the circuit breaker, and 4 wall sockets that were looking like could be problematic but no improvement. Initial warning before those wall sockets fully stopped working, when we start 2-3 items it was dimming the lights that were connected to that socket. It never tripped any circuit breaker or RCD on the switchboard, directly stopped working those sockets, lastly started the dishwasher, which socket also I changed,

There's 4 downlights I popped one out and realised they're hardwired so I said I'd better get somebody qualified the cutouts are 90 mm and there's roof access in the same room

Removal of 2 x Lights (external) - priority/asap Additional task: Installation of a ceiling fan (and downlights if possible)

We need a power point in study area. There is a power point on back wall.

I am looking for quotes from a qualified and insured electrician to install one double PowerPoint in a new laundry recess. I also need existing light repositioned and replaced with a downlight and one additional downlight install in hallway outside laundry recess.

Looking for a licensed electrician to connect and hardwire a sauna heater in my outdoor 2 person sauna. Heater is 6kw.

Kitchen installation. Oven, power points, rangehood,hotplates. Also a ceiling fan

Need a couple of electrical jobs done. Firstly, I need a powerpoint installed under the house. There is good clearance to get under there - around 1.3 metres. Secondly, I have a couple of old switches that need to be removed. I think they're isolators, but hopefully you'll know what they are when you look at the couple of photos.

Replace switches, extend power points, provide some concealment for loose wires, put new ceiling light fixture. Review if downlight can be fixed

Bought a new house and need some odd electrical jobs done, such as new Range Hood and stove top put in, security camera put up on double story (balcony access) down light, electricity to shed and some other minor items.

Need a power point to be installed in carport with circuit breaker approx 12-14m from main board. Single phase.

Things which needs to be done Lounge downlights Rooms lights Outdoor lights

Temporary removal of power point required in Ensuit in preparation for wall removal by specialist contractor (fibreboard containing asbestos).

Install a new power cord for gas pump after the dog chewed it We do not have to replacement cord

I need a power point relocated to another area of the wall due to a wardrobe installation that will cover the current one. I also have a few other power points that need to be inspected as they buzz and short circuit during use sometimes.

I got lan cable installed previously from one room to another but the wall sockets has telephone ports. I need to update the wall sockets to cat6 sockets. The cabling is anyway cat6.

I need an electrician to replace an old warn out power point with a new power point that I purchased from Bunnings.

I have to cover up x4 light fittings with something. I don’t really mind what it’s is, as long as looks neat and easy to change light bulb.

Hello, We are looking for a licensed SA electrician to attend our retail store, in Westfield Marion, to diagnose and repair/replace a flickering ceiling light. The Issue: A recessed LED downlight in our optometry room is persistently flickering. This is a potential safety issue and is highly disruptive for our optometrists and patients during eye examinations. The Job: The task is to find the cause of the flickering and perform the necessary repair to ensure stable, constant light. The scope of work includes: 1. Safely accessing the high ceiling (approx. 4 meters). 2. Diagnosing the cause of the flickering (e.g., faulty LED unit, failing driver, loose connection, or dimmer incompatibility). 3. Supplying and installing a new, like-for-like replacement downlight fitting if the existing one is faulty. 4. Testing the light thoroughly to confirm the flickering is resolved and the dimmer function (if applicable) is operating correctly. Light Specification (for sourcing a match): Type: LED Downlight Deco, 13W Round, White, Dimmable, Warm White (from GoLights). See attached spec sheet. Requirements: - MUST be a fully licensed and insured SA Electrician. - You must have your own tools, including an appropriate tall A-frame ladder or platform suitable for working safely at a 4-meter height. - Experience with diagnosing faults in commercial dimmable LED lighting systems is essential. - The contractor must be able to supply the replacement downlight if required. Location & Timing: Location: Shop 1015, 297 Diagonal Rd, Oaklands Park, SA 5046 (exact location will be provided once the task is assigned). When: We need this fixed as soon as possible. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include your call-out fee, all labour, and the potential cost of supplying one new replacement LED downlight. Thank you.

A chandelier needs to be replaced in the entryway