Find experienced deck builders in Yatala SA

I need the deck to be sanded and oiled; The approximate measurements are at 6.5 meters X 6.0 meters

Re oil (2 coats) a deck 5 x 7m. I will supply the product (Cabots Aquadeck and Deck Cleaner).

Approx 70sqm of timber decking needs re staining

After a quote to get my decking redone with composite deck.

Small area of Decking due for a paint.

2 decks approx 3 x 4 each

Subframe done. Deck boards need to be installed.

Looking for someone to help with decking. The structure is already built and all materials are on site. Just need the decking boards installed. Please message if available. Thanks!

approx. 40 sq mtr deck to be sander - deck 3 years old. Owner will do varnishing.

Selling property so need to repair deck around pool

I need someone to come and sand down to remove the scratches from a deck and re coat it afterwards, any supplies needs we will reimburst ie. decking stain and sandpaper. deck is roughly 19 square metres

Remove old decking stain. Decking is approx 20sqm. Send me some offers :)

Overview: Deck & Outdoor Clean-Up – Move Furniture + Scrub Deck (No Pressure Wash) Description: I’m looking for two capable people to help prepare our outdoor deck area for refinishing. The job involves moving outdoor furniture, cleaning the deck (without pressure washing), and then pressure washing the surrounding area, where the pressure washer can be used. What’s involved: Move outdoor furniture and planters from the deck to the garage and side walkway (there’s one large table that will need two people to lift). Clean the Merbau deck using a proper deck cleaner (no pressure washer). This will need scrubbing by hand or with deck brushes. Once the deck is clean, pressure wash the surrounding area including: Roof and eaves of the covered area Brick walls Privacy screens Important notes: No pressure washer on the deck itself. I’ll provide the pressure washer and deck cleaner. You’ll need your own brushes, buckets, and general cleaning tools. We can’t help with lifting at this end, so please ensure two people are available. Deck size: Approximately 50sqm Goal: We want a spotless deck and outdoor area ready for sanding or recoating — a clean slate to start from. Budget: $500 (for two people total).

LABOUR ONLY: Looking for an experienced deck builder or carpenter to assemble and install a small Ecodeck composite platform. I've expanded my shipping container house to connect with the main house. This is the last piece of the deck that needs to be installed. OVERVIEW: Platform dimensions: 2.7 m × 4 m Material: Ecodeck Designer Series composite decking (137 mm × 23 mm × 5.4 m) Finish: Picture-frame edge + one matching step Height: ~150–200 mm (ground-level platform) Details: • All boards, joists, clips, and fixings supplied • Ground-level platform (~150 mm high) on level base • Includes a picture-frame border for a clean edge finish • Includes TWO composite step approx (200 mm H × 1200 mm W × 800 mm D) framed in treated pine • Hidden clip system (QuickFix) installation • Must bring own tools and ensure frame is square, level, and correctly spaced (400 mm centres) Experienced composite deck builders preferred — please include examples or reviews of similar work. Bonus if you can dispose of offcuts and leave the site tidy.

Re-oil deck which is approximately 5 x 5.5m. I will supply the oil but I do not have any of the other equipment required. Two coats required

Would like a quote to get some decking done on our front porch

Composite decking and aridities screen

Repair the edging and step of a wooden deck. The wood needs to be replaced as it has been affected by the weather and water. The wood seems to be either weathered or rotted.

I want to relocate a power outlet in an upper position so that we can install a gas stove for outdoor kitchen.

Sand and new layer of oil for the decking .