Find experienced deck builders in Ryde

Hi , just wanting to make a deck in backyard Happy to pay for materials Part of the deck will hover over existing concrete slab. Photo attached of how we would like it

Lightly sand then oil wooden benches and deck. - Due date: Flexible

Looking for an experienced person to clean, lightly sand and oil our timber deck and 2 staircases with two coats of Feast Watson decking oil (which is the existing oil and will be supplied by owner together with cleaning solution and applicator) The deck is of those assembled without nail fixtures so there’s no need to punch down any exposed nail after sanding if it means lesser effort. Total surface area is 60sqm. - Due date: Flexible

Deck to be extended Area is 10m x 2.6m Task is for labour only All material costs will be covered by me Location: Marsfield

Need the hardwood deck sanded back to a clean surface for oiling. It has some ingrained black dirt/fungus. It has very recently been cleaned with deck cleaner but this hasn't got down deep enough! Interested in a quote to do the oiling also. I have got the decking oil and equipment. - Due date: Flexible

Pool deck needs a bit of a touch up after the last summer. Looking to match it to the darker wood pictured towards the end. Needs decking oil etc I assume. Dont have any of the materials. Theres an odd screw/s on the deck that need tightening too. - Due date: Before Monday, 8th Nov 2021

2 year old Blackbutt timber deck around pool area needs to be sanded back and oiled. Approx. 27sqm. 3 sides of the pool only. No stairs. Kids are getting splinters in their feet so want to make sure it's sanded back to prevent this from happening. Cutek CD50 was used when built 2 years ago. Need someone experienced with this type of work. Not suitable for large sanding machines.

9 x 4 back deck 2.5 x 1.5 steps plus 2 x 1.5 garden steps Painter to buy paint as per photograph

Need the hardwood deck sanded back to a clean surface for oiling. It has some patchy ingrained black dirt/fungus. It has very recently been cleaned with deck cleaner but this hasn't got down deep enough! Interested in a quote to do the oiling also. I have got the decking oil and equipment. Please quote for Sanding only and Sanding Plus 2 coats of Water based 'oil' which I will provide. I will probably do the oiling myself unless its a good price. - Due date: After 4 January 2022

Licenced carpenter to build a deck. Must have insurances. Need a rough price estimate for full completed project first. If this is reasonable pricing, will get you to do on site quote. Details: small timber deck at back of house and demolition of low brick wall 4m X .5m. Bearers/joists will sit on the paved area outside back door. This paved area is enclosed by the low brick wall so the deck could extend further out once wall is removed. Dimensions of deck are 4M X 2.5m. Level access with parking at side gate. Please provide licence number. Vaccinated person required. - Due date: Flexible

Clean and sand Deck with fine paper and Oil Deck with 2 coats which is approximately 84M2 Want to use Cutek extreme Oil most likely the Sela Brown as my decking is either Spotted Gum or Ironbark. - Due date: Before Thursday, 25th Nov 2021

We have already started sanding our front deck but looking for someone to help concentrate on certain parts that need more attention ideally with orbital sander (can supply sander) if you don't have one. - Due date: Needs to be done on Saturday, 30th Oct 2021

Need my deck cleaned and oiled using cutek cd50 extreme . Approx size of deck is 50sqm. I’ll provide the oil .

I need a 10mX4m Timber deck build in my backyard at ground level.

28 m2 deck , needs light sanding and apply two coats Ultradeck timber stain,supplied by contractor. Deck wash & clean by owner

My deck is 6.0m *4.9m. Require light sanding as still in good condition then oiling after. Due date: Jan I will be supplying the oil which is Cabot’s Aquadeck.

Need a general hand to help with refurbishing my deck. Mostly involves using an impact driver to remove screws from a timber and steel deck. There are less than 1500 screws, some may be rusted in and need angle grinding to remove. All tools provided, recommended you bring your own gloves and safety glasses. Start with one days work, may require more. - Due date: Needs to be done on Tuesday, 16th Nov 2021

SEEKING CHIPPIE FOR DECK BUILD ---------------------------------------------------- For one day, Saturday. Or during the weekdays Also could be more work for one - two weeks, if you're interested Definitely need Saturday though. One of our chippies can't make it this week or Saturday. The bearers & joists installed the merbau decking has been oiled and is stacked ready next to the deck. We have the drop saw and all the power tools, screws & timber, we just need an extra chippie to assist with installing the decking There is work during the week &/or Saturdays depending on your availability. There will be other labourers also to assist. Please contact Henry & Reenie obviously you gotta have that special green pass the government puts on your phone LOCATION INNER WEST Cheers image attchd is just an example of the 90x19mm merbau decking we're using. - Due date: Flexible

Large deck 9 metres by 3 metres with hard wood balustrades need sanding back and re staining. - Due date: Before Friday, 12th Nov 2021

3 stage decking area include edge of the courtyard total decking area is approximately 30sq meters - Due date: Flexible