Find experienced deck builders in Inner South Melbourne

1. Demolition & Removal • Remove existing timber decking, steps and sub‑floor framing • Remove and dispose of all waste materials off‑site 2. Sub‑Floor Construction • Supply and install new 100mm x 100mm treated pine stumps/posts • Install concrete footings to required depth • Supply and install new H3 treated pine framing, including:• 140mm x 45mm bearers • 75mm x 50mm joists • Install black poly builder’s film / moisture barrier beneath deck 3. Decking Installation • Supply and install 137mm x 23mm composite decking boards (or equivalent) • Include perimeter/border board finish • Supply and install new step approx. 2.4m in length • Supply and install new barge/fascia boards where required 4. Completion • Include all labour, fixings, materials and site clean‑up • Provide warranty on workmanship and materials

One piece of our composite decking needs to be replaced with a new board. We have the board and know the length to cut it. We need someone to cut the composite board to desired length, unscrew the current board and screw in the new board. Small plugs covering the screws also need to be taken up and then put back into the new board. We have the new board, screws and plugs. Seeking someone with tools and skills to cut and replace the board.

Old timber decking has been removed. We have bought new composite decking. The joists are steel. We need installation of new composite decking. Image of the decks. There are 4.

Install composite decking over concrete slab with treated pine subfloor. 11m x 3.8m approx.

Need a frame done to install composite decking. 4.2m x 4.2m

I am a developer with ongoing recurring work. Need to do 6 composite decking of 3x5.5 =16.5 sqm each, plus some steps, etc. Bunnings EkoDeck composite material or similar quality material. Need competitive rate and quality work for long term working relationship. Please quote per square meter, as they are 25cm, 60cm, and 80cm above ground. Not too hard.

Requesting offers to build a low form composite deck. Dimensions are approximately 6100mm wide and 4000mm deep. Current garden is approx 200-250mm below the floor level. Looking at Woodevo Advance, Modwood Xtreme, Newtechwood or similar composite board with min 25 year guarantee. A low form joist needed, likely on adjustable pedestal due to clearance. Will need assistance with building permit application with Glen Eira city council

I want to bulid a deck at my patio 21 sqm approximately Ideally to be finish before Xmas ( the price I wrote is just for the ad) Not sure about pricing

Need to cut the deck into 1m strips please

18m square area. No steps. I have sourced the decking materials already so you would need to provide the stumps and subframe. - Due date: Flexible

Wanting deck extended as per photos and measurements I can get materials if need be

Looking for someone to build a simple, low-profile timber deck along the left side fence of a paved courtyard (see photo). Scope of works: - Build a straight timber deck approx. 800mm wide - Length approx. 3m (along existing garden bed) - Deck to be built over current soil/garden strip - Low height - ideally flush or slightly above existing pavers - Clean, simple finish Construction: - Timber frame with decking boards on top - Deck should be supported independently (e.g. small pads/feet), not relying on existing pavers Site conditions: - Existing area is a narrow garden bed next to pavers - Soil base (will need minor prep/levelling) - Easy access via side path - Timber fence alongside Materials: - Please include materials (treated pine or similar suitable for outdoor use) - Open to hardwood upgrade options depending on cost - Basic ground prep (weed mat / crushed rock) Interested also build bench seat. Please include: - Your proposed approach - Whether materials are included - Any similar work/photos if available Photo attached for reference.

Deck needs to be oiled, about 15sqm in total, not a large area.

Looking at getting a timber deck installed at the back of a town house - Roughly 5m x 3.5m in size or 17 sqm - Picture frame edge and mitred - similar to one in picture

Hi, I’m looking for an experienced Airtasker to clean and oil my timber deck. Scope of work: Pressure clean / scrub the deck to remove dirt and stains Allow deck to dry properly Apply deck oil evenly Requirements: Airtasker to bring all tools and equipment, including pressure cleaner / brushes Airtasker to supply cleaning chemicals and deck oil Experience with timber decks preferred Please let me know: Your price Availability / earliest start date What deck oil brand you usually use The deck is easily accessible. Photos can be provided if needed.

Indoor: Crack Repairs and painting Outdoor: Timber Door Frame, Wooden Deck Pillars and bannisters Deck: Pressure Clean & Re-Stain

Deck is approximately 10 metre long by 4.5 metres wide.

We require timber (blackbutt) decking to be built at one side of the house and existing deck at the back of the house to be sanded and oiled

Install new timber deck supply and install. Type of timber doesn’t matter as I will paint white 3.5m x 3.5m

Need someone to install a small timber decking at the courtyard, decking to be connected to the house which slightly raised. Edging needs to be done nicely. Land is quite flat, with pavers currently. You should be able to install decking on top of the pavers. I will buy my own decking timber because i am particular with the timber color. please provide quotes for labour, structure materials, including nails, timber sleepers, etc. Size is 3.5 by 5.6 meters Photos are the area for the decking.

Clean/pressure wash timber deck Deck has been previously oiled by timber oil

New build March 2024. Decking hasn’t been touched since then. Prep & water based oil. Roughly 25m2. We’ve also noticed nails coming through the timber if this can be dealt with too.

Timber deck repairs and staining Need to replace the first timber around the pool and one piece at the back of the house. Whole deck to be stained

Please read properly as we want this job done to a high level of quality. 1) The deck size is as follows Part 1: (skinny bit) is 1.6m x 14.5m (approx) Part 2: (main area) is 5m x 4.5m (approx) 2) The blackbutt timber is new- so needs a clean and then will require two visits (as we want to use Cutek Oil. 3) Oil required is Cutek Oil (the premium option) with a clear colour tone. Unless you advise something different for a lighter natural timber look? 4) as it’s oil- will need two visits One for the clean, prep and first coat. Needs a minimum 24 hours to dry, followed by a second coat. Looking for full scope start to finish service with all materials supplied.

We have just redone our medium sized outdoor deck area. Used blackbutt timber and now require a wash and oil seal. We require cutek oil- clear or a light colour tone. Happy to pay for the supplies (keep a receipt).. Probably a full day job.

Clean 27 m2 spotted gum timber deck. Owner will supervise. Shift furniture & plant pots across deck. Water, apply cleaner fluid, scrub boards with stiff nylon brush, then use high pressure hose to clean off. Spot repeat cleaning in areas as necessary. All materials & equipment provided. Estimate 4 hrs labour.

Back deck needs clean, oil, stain etc (possible sanding) Overall areas roughly 6.5 x 4m (see photo of dimensions).

I have a 2 year old timber deck around the spa needing to refurbish (sand and re-stain) to look new. As pictured the area is about 2.5m x 2.5m (including spa) with steps and side area (may need to remove glass to get underneath.) Seeking only experienced deck person to compete the task. Offer to include service and materials (stain)

Hi, I need 40 tested line decking boards at lengths of 3.9m picked up from Ormond and delivered to Essendon. Thanks. - Due date: Needs to be done on Sunday, 28 January 2024

Timber deck hasn't been oiled for a couple of years. Needs cleaning, lightly sanded and probably 2 coats. Includes steps. I've used water based products but don't mind that or oil based but want good quality product. Pics and dimensions now loaded. Note that the 2 pots are heavy so will require a trolley or 2 people. - Due date: Flexible

Sand and oil garden deck. There is a heavy table on deck that would need to be taken off

I’m looking for an experienced carpenter to build a low rise garden deck off an existing hardstand, with a small extension into the grass area. 📐 Size: approx. 4m x 7.5m 📏 Height: only ~300mm above current hardstand level I’m open to using composite decking materials (such as Woodevo) or a hardwood timber like spotted gum that will naturally grey and remain low maintenance over time. 🔨 What I’m looking for: • Proven experience building similar low-rise decks • Knowledge of both timber and composite decking materials • Quality workmanship and attention to detail 💬 Note: No pricing required at this stage — you’re welcome to visit my home before confirming a price. If you’ve completed similar projects, please share photos and references in your response.