Find an experienced concreter in Melbourne Western Suburbs

install small garden shed 1.5x1.5x2.1 on concrete floors. Let me know your total price. I bought it from easy shed and ready to install.

Need a shed which should have shelving and space for garden tools and x2 bikes I am considering 3x1.5M size can be flexible to meet requirements

Easy shed install of 3m x 3m x 2.4m as well as the concrete slab for it.

Concrete was cut to repair water pipe leakage. Fill concrete hole and finish as required Hole already filled with crushed rock. Size - 1.1 mt x 0.6 mt Photos attached

Build flat pack galvanised steel garden shed on existing concrete, shed LXWXH 3x2.25x2.35

I have a small concrete section i need it cut into pieces with a demolition saw.

I'm planning and budgeting to hire someone to assemble, install and anchor a 3 x 1.5 skillion roof "Easy Shed" onto existing concrete slab. I'm available to help with the installation if tasker is willing to do that.

I am looking at 2.6 x 2.4 Installer to bring shed Brand doesn’t matter Require concreting as well

Looking for an experienced handyman crew or carpenter team to assemble a retail flat-pack gazebo and anchor it securely into an existing concrete slab. Gazebo Model: Brand new Mimosa 4.27 x 3.67 x 3.23m Burleigh Wooden Gazebo from Bunnings. Flat-packed in boxes, cedar frame, galvanized steel roof. Total weight is ~302kg. All retail hardware and assembly instructions are provided. [1] (https://www.mimosaoutdoors.com.au/product-range/outdoor-shades-and-gazebos/0084735-burleigh-timber-gazebo), [2] (https://www.bunnings.com.au/mimosa-4-27-x-3-67-x-3-23m-burleigh-wooden-gazebo_p0084735) Foundation: Going directly onto an existing, flat concrete floor. The posts must be drilled and anchored into the concrete slab for safety. Electrical Cable Access: I need a clean solution to run an outdoor extension lead/power cable inside. Please plan to route/strap a neat PVC electrical conduit pipe along the base or up/down one of the wooden legs so it looks clean and stays protected. Requirements: Must be a crew of at least 2–3 people for the heavy roof lift stage. You will need to bring an appropriate commercial ladder (3.23m peak height), a hammer drill for the concrete anchoring, and standard hand tools. (https://www.workshop.bunnings.com.au/discussion/265533/how-to-assemble-mimosa-burleigh-gazebo), [2] (https://www.mimosaoutdoors.com.au/product-range/outdoor-shades-and-gazebos/0084735-burleigh-timber-gazebo) Please provide a quote with your earliest availability and an estimate of how many hours/days the build will take. Thanks!

Need to supply an install a colorbond garden shed with a concrete base. dims are L2.5m X W2.0m

I need a concrete slab cut to install drainage. * Total slab length: 10 metres * Width of concrete cut: 15 cm * Total cutting required: Approximately 3m of concrete Cut is required where the two concrete slabs are meeting in the attached photos. Please note majority of the concrete is very thin approx 6mts. Remaining 4mts is thick.

I need to install a pergola in my backyard, and one of the posts needs to be mounted where there is currently no concrete. I’m looking for someone who can extend the existing concrete slab by approximately 1 metre and make the new section level with the existing slab. The concrete is mainly required to provide a solid base for mounting one of the pergola posts. It doesn’t necessarily need to be a full extension even a small square concrete slab suitable for securely mounting the pergola post would be fine.

I’m looking for someone to cut and remove 12.90 sqm of a concrete ramp towards a garage floor. Garage floor section: - 1.1 m x 5.1m Ramp Section: - 1.5 m x 4.86 m Must have own tipper truck or trailer to remove cut out concrete from property. Thank you

I am seeking an independent qualified structural engineer or building defect expert to inspect a residential concrete slab and prepare a professional written assessment report. The purpose of this assessment is to determine whether the slab complies with relevant Australian Standards, building requirements, and accepted construction practices. The assessment should include: • Inspection of concrete slab workmanship and construction quality • Assessment of slab falls, drainage performance, and water ponding issues • Identification of possible construction defects and their likely causes • Review of compliance with relevant Australian Standards and NCC requirements • Recommended rectification methods and whether repairs are sufficient to achieve compliance Expert Requirements: • Must be a qualified Structural Engineer or Civil Engineer • CPEng qualification preferred • Must have experience assessing residential concrete slab defects • Must have experience preparing independent expert reports for building disputes • VCAT or expert witness report experience preferred • Must provide an independent opinion suitable for dispute resolution purposes Please include: • Engineering qualifications and professional registrations • Relevant experience with similar concrete defect assessments • Confirmation whether you have prepared reports used in VCAT proceedings • Whether your fee includes site inspection, written report, photographs, findings, and recommendations • Estimated completion timeframe

I need stratco garden shed with roller door to be installed on my concrete slab. 3.16x3.16x2.4

12m x 3.5m backyard is concreted & narrow garden bed down one side. THIS PHOTO IS OLD! The trees are no longer there. I’d like to remove approximately half of the concrete (6x3m = 18sqm) so I can have a garden and leave the other half at the back as is so I can pave it. The access is good through the side gate and it should be relatively straight forward, only need to be careful cutting up against the house and around one down pipe. The job can be done anytime in next 1-2 months, so no rush. I’m just looking to establish quotes at this stage. Thanks for your help!

Raised path area (roughly 1.2mx1.2m) to be neatly cut out in a straight line. Concrete to be removed and taken away.

Need tosupply and install a pergol with gutter. Size would be 3.34x 3.34

need an experienced person to assemble a new EasyShed garden shed, model ETG-D3030-OW (3.00m × 3.00m, double door), on my property. What's ready: Shed is on site, unopened, in flat-pack boxes with manufacturer instructions Existing concrete slab, level and slightly larger than the shed footprint Power available on site The job: Assemble shed per manufacturer instructions (frame, wall sheets, roof, double doors) Square and anchor the shed to the concrete slab with masonry anchors/concrete screws (please bring suitable anchors and drill bits — let me know if you'd like me to supply them) Apply silicone sealant around the base channel and any junctions to make it weather-tight Doors aligned and operating smoothly, site left tidy Please quote including: your tools (hammer drill, riveter if needed) and sealant