Find an experienced concreter in Melbourne Western Suburbs

Need a shed which should have shelving and space for garden tools and x2 bikes I am considering 3x1.5M size can be flexible to meet requirements

1. Assemble the EasyShed wall panels, gable roof, and double door frame according to manufacturer instructions. 2. Position the shed square on the slab. 3. Anchor and secure the shed frame to the concrete base using the supplied EasyShed concrete fixing brackets and masonry anchors. Exact Order Specifications: Model: EasyShed Gable Roof Garden Shed (Zinc / Tall height: 2.35m)  Dimensions: 3.00m (W) x 2.25m (D) x 2.35m (H)  Fixings 8-Packs (16 heavy-duty masonry anchors/brackets total).  Base: 3.1m x 2.35m reinforced concrete slab is fully cured, level, and ready to install on. Access: Good side/rear yard access.

Easy shed install of 3m x 3m x 2.4m as well as the concrete slab for it.

Build flat pack galvanised steel garden shed on existing concrete, shed LXWXH 3x2.25x2.35

I'm planning and budgeting to hire someone to assemble, install and anchor a 3 x 1.5 skillion roof "Easy Shed" onto existing concrete slab. I'm available to help with the installation if tasker is willing to do that.

I am looking at 2.6 x 2.4 Installer to bring shed Brand doesn’t matter Require concreting as well

Looking for an experienced handyman crew or carpenter team to assemble a retail flat-pack gazebo and anchor it securely into an existing concrete slab. Gazebo Model: Brand new Mimosa 4.27 x 3.67 x 3.23m Burleigh Wooden Gazebo from Bunnings. Flat-packed in boxes, cedar frame, galvanized steel roof. Total weight is ~302kg. All retail hardware and assembly instructions are provided. [1] (https://www.mimosaoutdoors.com.au/product-range/outdoor-shades-and-gazebos/0084735-burleigh-timber-gazebo), [2] (https://www.bunnings.com.au/mimosa-4-27-x-3-67-x-3-23m-burleigh-wooden-gazebo_p0084735) Foundation: Going directly onto an existing, flat concrete floor. The posts must be drilled and anchored into the concrete slab for safety. Electrical Cable Access: I need a clean solution to run an outdoor extension lead/power cable inside. Please plan to route/strap a neat PVC electrical conduit pipe along the base or up/down one of the wooden legs so it looks clean and stays protected. Requirements: Must be a crew of at least 2–3 people for the heavy roof lift stage. You will need to bring an appropriate commercial ladder (3.23m peak height), a hammer drill for the concrete anchoring, and standard hand tools. (https://www.workshop.bunnings.com.au/discussion/265533/how-to-assemble-mimosa-burleigh-gazebo), [2] (https://www.mimosaoutdoors.com.au/product-range/outdoor-shades-and-gazebos/0084735-burleigh-timber-gazebo) Please provide a quote with your earliest availability and an estimate of how many hours/days the build will take. Thanks!

Need to supply an install a colorbond garden shed with a concrete base. dims are L2.5m X W2.0m

I need to install a pergola in my backyard, and one of the posts needs to be mounted where there is currently no concrete. I’m looking for someone who can extend the existing concrete slab by approximately 1 metre and make the new section level with the existing slab. The concrete is mainly required to provide a solid base for mounting one of the pergola posts. It doesn’t necessarily need to be a full extension even a small square concrete slab suitable for securely mounting the pergola post would be fine.

I am seeking an independent qualified structural engineer or building defect expert to inspect a residential concrete slab and prepare a professional written assessment report. The purpose of this assessment is to determine whether the slab complies with relevant Australian Standards, building requirements, and accepted construction practices. The assessment should include: • Inspection of concrete slab workmanship and construction quality • Assessment of slab falls, drainage performance, and water ponding issues • Identification of possible construction defects and their likely causes • Review of compliance with relevant Australian Standards and NCC requirements • Recommended rectification methods and whether repairs are sufficient to achieve compliance Expert Requirements: • Must be a qualified Structural Engineer or Civil Engineer • CPEng qualification preferred • Must have experience assessing residential concrete slab defects • Must have experience preparing independent expert reports for building disputes • VCAT or expert witness report experience preferred • Must provide an independent opinion suitable for dispute resolution purposes Please include: • Engineering qualifications and professional registrations • Relevant experience with similar concrete defect assessments • Confirmation whether you have prepared reports used in VCAT proceedings • Whether your fee includes site inspection, written report, photographs, findings, and recommendations • Estimated completion timeframe

I need stratco garden shed with roller door to be installed on my concrete slab. 3.16x3.16x2.4

Need tosupply and install a pergol with gutter. Size would be 3.34x 3.34

need an experienced person to assemble a new EasyShed garden shed, model ETG-D3030-OW (3.00m × 3.00m, double door), on my property. What's ready: Shed is on site, unopened, in flat-pack boxes with manufacturer instructions Existing concrete slab, level and slightly larger than the shed footprint Power available on site The job: Assemble shed per manufacturer instructions (frame, wall sheets, roof, double doors) Square and anchor the shed to the concrete slab with masonry anchors/concrete screws (please bring suitable anchors and drill bits — let me know if you'd like me to supply them) Apply silicone sealant around the base channel and any junctions to make it weather-tight Doors aligned and operating smoothly, site left tidy Please quote including: your tools (hammer drill, riveter if needed) and sealant

Need help in level the concrete and concrete is uneven

I need a shed assembled “easyshed”. 3.75m x 1.75m on a concrete slab.

Install the shed on a concrete slab with concrete anchors.

Assemble a pre-purchased 3x 3 m garden shed , Excavate and level area to prepare for a concrete slab.Pour a standard concrete slab . Remove and dispose of all job-related rubbish (soil from excavation, concrete runoff, and shed packaging).

There is a space between concrete and the building.

Need to assemble Absco garden shed bought from bunnings. https://www.bunnings.com.au/absco-sheds-2-26-x-1-44-x-2-0m-monument-regent-single-door-garden-shed_p0374579

Hi i need to install garden shed with concrete slab 3×3 meter. Please advise quote concrete slab.