Find a reliable computer and IT professional in ACT

Apple IMac running Monterey, can’t load Microsoft Software due to insufficient space.

I need to reconnect computer to printer. Recent connection to NBN.

I need 5 Cat6 runs from a wardrobe/cabinet (future network switch location) to 4 locations in a single-storey suburban house with tiled roof, sarking, insulation and plasterboard ceilings. Good roof-space access via the manhole. Runs (lengths are estimates): Hallway ceiling, centre: 1 × Cat6 for a ceiling Wi-Fi access point (about 30 m) External wall facing the back garden: 2 × Cat6, one for an outdoor access point and one for a camera (about 20 m) Kitchen ceiling: 1 × Cat6 for a ceiling access point (about 30 m) Garage external wall under the eave: 1 × Cat6 for a camera (about 30 m) Requirements: ACMA-registered cabler; please show your cabling registration card. Supply all materials: solid copper Cat6 (no CCA), outdoor-rated UV-stable Cat6 or conduit for the 2 external runs, RJ45 terminations and keystones. Cabinet end: all 5 cables come through one neat hole in the wardrobe wall at about eye height, terminated in a small wall-mounted patch panel or keystone surface box, with about 1 m of slack. Ceiling and wall ends: terminated with RJ45 suitable for PoE devices, with about 500 mm of service loop. The external runs need drip loops and must be weather-sealed where they pass through the wall. Correct separation from power cables; no runs over downlight transformers. Every run tested with a cable tester, results shown to me, and both ends labelled. Optional (please quote separately): mounting 3 ceiling access points and 2 cameras that I supply. Please quote a fixed price including materials, and say how long you need. Weekday or weekend is fine.

Details Licensed Data Cabler: Run 4x Cat6 Looking for an ACMA-registered data cabler to run 3 Ethernet drop in ground floor and 1 drop double storey. • Scope: Run 4x Cat6 cable from the NBN connection under stairs to 4 end points • Termination: Terminate both ends into RJ45 wall plates (clean cut-in plates/brackets). • Testing: Must test the finalized run • Materials: please include supply all materials (Cat6 cable spool(approx 100m), wall plates, keystones, and mounting brackets). • Tools: Please bring your own tools (ladder, drill bits, yellow tongue/rods, punch-down tool, and network tester). Please confirm you hold an ACMA cabling licence.

Computer may have a virus. Running slow and other issues

Tonight to replace the cable between external wall and the NBN and TransACT wall plate inside home with the near latest cabling alternative to get rid of any old extra cabling that is present

Keys sticking and some missing

My wifi system is currently connected to internet via transact modem. I am changing to NBN however the wifi system needs reconfiguring to work with NBN modem

Stuggling with setting up my new iphone 16 and everything technical around the new house.

Install Ryzen 9 9950X3D cpu, 360mm cpu cooler and 850w PSU in my prebuilt Zeal Mini Level 7 Pro from Aftershock PCs, ideally at my house. Also could use a hand with cable management both for the PC and for my sim rig if possible.

Data Cabler Required Indoor internet cable needs replacement and re-wiring. Old one is likely causing internet dropout. Must have relevant experience and qualifications. Please contact me with your availability and quote.

Help with pc build please it’s meant to be pre build but cables not fully plugged in

I need someone to switch my cafe printers to match with my printer setup,switching from wireless to Ethernet

My pc is corrupted won’t repair need fresh install windows and drivers downloaded

Looking to get Macbook Pro 13, 2019, Two Thunderbolt 3 ports; battery replaced. Would not hold charge for long, otherwise works in excellent condition while charging.

Ring cameras need reconnecting to wifi. Need to climb a ladder to do the process. The process shouldn’t take too long.

Looking for someone to attend site and install the Wi-Fi dongle/antenna for a Fox ESS inverter, then assist the customer with configuring the inverter to connect to their home Wi-Fi network. The Wi-Fi dongle/antenna has already been delivered to site. Technical assistance can be provided remotely while the installer is on site, if required.

The site has two Solis inverters. One of the inverters is showing a “No Grid” error, while the second inverter is online and operating normally. Looking for someone to attend site, check the AC wiring, and troubleshoot the issue. I can also organise a call with Solis technical support to provide guidance while you’re on site.

Hi, Got a replacement battery for Inspiron 5560 laptop. Removed few screws and rest are stuck to laptop.Required help to remove the rest of the screws and install new battery in laptop. Thanks.

Accidentally damaged the end of an Ethernet cable that’s in the wall. Need the connector at the end of it replaced. Only qualified data tradies please. Need done asap. 10min job.