Find a cladding professional in VIC

Looking for someone to do tv wall cladding and panels

Hi, I'd like to get WPC batten cladding installed on the front porch fascia. Could you please quote for supply and install, with material and labour shown separately? The $100 I mentioned was only meant as an initial deposit, not my budget, so please quote the actual full amount. Alternatively, I'm happy to buy the materials myself if you let me know the quantities needed. In that case, could you also quote for labour only? Thanks!

Looking for roof plumber to fix multiple holes in the wall cladding: two holes at down pipe bracket, two holes around sump discharge and a rain head that isn't secured correctly. Additionally, re-seal and stitch capping join

Would like to line shed facade in a stone cladding. Prep for the cladding can be included or I can do. I have included a before and a proposed after image

A very small piece of fibre cement cladding has fallen off an exterior wall between two sections of tiled roof leaving part of our roof space exposed. As you can see from the picture, the fibre cement sheet has broken away and left a smaller piece still attached. Please let us know the full scope of the repair required and associated cost (eg. does it need a new piece of building wrap under it, does the fibre cement sheet need to be replaced, do any flashings need replacing etc) Damaged area is 3.5m above ground hight but is easily accessible via ladder from our atrium (2.7m) as pictured. As this job requires you to work right on the edge of a tiled roof, I expect you to have the necessary safety training, equipment and insurance to ensure your own safety. Updated photos added: - View of back of house and damaged section which is only visible from a very specific angle a long distance from the house - Damaged section is not visible from anywhere on own property - Original sheet was just painted black without render or fancy finish as it's practically invisible

Quotation needed I am looking for an experienced tradesperson (stonemason, or cladding specialist) to help upgrade the front façade of a single-storey house, similar to the attached reference design.

I got a shed and which I’m turning into Gym in men’s cave so I just need the framing done and then caddling sheets on top.

Looking for someone to help reinstall Hardie flex board onto my existing (botched) fence happy for the existing blue board to either be removed or installed over the top. will also need the cladding extended up the right side of the fence which does not have any blue board currently. total length of the fence is 18 m. Total height 2.6m. Will provide the Hardie flex board (render look).

Porch entry picture frame 2 sides 600x3000 plus capping over Monoclad and wpc cladding Front facing 4000x1000

Wanting to have my garden bed/sleepers cladded. The width is 10.5m, the height varies from 400mm-600mm. I will supply the cladding and the fascia board, you will need to supply the timber for the frame that the cladding will be fixed to. The sleepers aren’t completely plumb or level so will need to be packed out Top fascia board will need to be checked out around the post.

Looking for a qualified carpenter or handyman to supply all materials and install James Hardie fire-resistant fiber cement cladding behind an outdoor BBQ in an alfresco space. Task Details: Dimensions: 3.6m length x 0.9m (900mm) height (approx. 3.24 m² total). Location: Alfresco outdoor area next to bbq Scope of Work: Supply: Provide all required James Hardie cladding sheets/boards, trim pieces, battens, outdoor-rated fasteners, and heat/weather-resistant adhesives and sealants. Preparation: Inspect substrate wall and install battens or backing framing as required per manufacturer guidelines. Installation: Cut, fit, and securely fix the cladding level and flush. Finishing: Neat edge trimming and joint sealing.

Fence cladding, attach with rails to existing fence line, need the back fence 6.68 m and the right side fence 9.5m doing. Height is 1.8m and colour will be black, monument/grey. Yet to confirm supply

Need stack stone installed not a big job square post and entrance area

Installing cladding on the front of my house. It is for the gables at the front of the house plus the front of the two brick pillars. It would be to supply and install the material with some kind of axon cladding or similar. Please give a quote you would find appropriate.

Install cladding on front house gables and down the front of two brick pillars. Can be some kind of axon/eko deck or similar, wood-look. Supply material and install

Areas of external cladding (blue board) needs to be removed for an engineer's inspection of the frames & footings. About 6 -8 inspection holes are required. The material does not need to be salvaged. Also a floor inspection hole needs to be opened - material does not need to be salvaged.

Have 3x wood cladding sheets, that need to be cut to fit horizontally across a wall. One board needs to be cut into an arch shape. Have pictures to provide more of an idea Price negotiable

Strip timber sheet wall and ceiling cladding including skirting and architraves in the upstairs room approx 8.4 x4.8m room. Take debris downstairs and leave in pile to be disposed of. Additional labour work available at same property.

Looking for someone to help with caulking in a factory ,

Source and Replace the missing tile. I don’t have any spare. I have parts of the tile and a similar also broken tile. It’s a mosaic job. Check for any other loose tiles. Tile dimension 600 mm x 150 mm. Second storey accessible via balcony. Ask me any questions if needed!