Find experienced local carpenters in North West Perth

I would need to replace one front drawer and one small door cabinet

Looking for an experienced carpenter or handyman to complete several finishing carpentry tasks following recent flooring renovations. Hoping to have these completed following installation of carpet scheduled for next Tuesday morning. Tuesday afternoon or Wednesday availability would be ideal. Scope of works 1. Install skirting boards Approximately 70 lineal metres of 67mm mdf semi splayed Skirting boards supplied and pre-painted Cut, mitre and install No painting required No caulking required Neat finish essential 2. Trim internal doors 5 internal doors Approximately 5mm to be removed from bottom of each door due to new carpet and tiled flooring Rehang and ensure doors open and close correctly 3. Install timber caps to pony walls Install timber capping to top of 3 pony walls One section will require a custom notched/scribed cut to fit around an adjoining wall Materials supplied Requirements Experience with finish carpentry and skirting installation Own tools (mitre saw, nail gun, jigsaw, etc.) Attention to detail and high-quality finish Please provide: Relevant experience

I’m looking for a carpenter who can modify our existing pergola according to the engineer’s drawings so that we can obtain council approval. The work needs to be completed exactly as specified in the plans, and we will then need the engineer to inspect and certify the completed work for council approval.

Need two hand basins and cabinets units replaced in two toilets a steel sink and cabinet replaced and some timber repairs to office

Looking for someone who can help us measure and provide obligation free quote. We are planning a laundry improvement and need help with removing and installing cabinets and working space/bench top. If the price/budget

We bought some IKEA kitchen cabinets that need to be assembled and installed. Items to be assembled and fitted: one tall cabinet unit, one base/floor cabinet, one microwave cabinet, and two wall cabinets. No benchtop, sink/tap plumbing or electrical work required. There is nothing to be removed from this area. Clean wall/area (no cabinets need to be removed) where the installation is needed. Find some photos of the cabinets/design and how the installation area currently looks like.

I need to make some cabinets and desks for the building

I broke my stair handrail, so need it to be fixed

Doors provided. Hinges etc

Pack down weights Move into another room so floor can be repolished Will need them moved back and reassembled after (seperate job)

Hello, I'm looking for someone with experience in cabinetry, built-in wardrobes or joinery to finish an IKEA PAX wardrobe install to make it appear built in and a tidy finish. Scope of works 1. Install infill/filler panels • Fill the gaps between the wardrobe and the side walls with 16mm MR MDF. • Scribe the panels to the walls where required so everything sits flush. • Ideally use moisture-resistant MDF or similar ready for painting. 2. Install a kicker/plinth board • Cover the existing timber base with a neat kicker/plinth with either 16 or 18mm with 16mm MR MDF. • Continue the plinth across the full width so it appears built in. • Minimise visible joins. 3. Finishing • Light sand and prime final cut and fitted pieces • Colour match GRIMO door at Dulux trade centre • Ideally, paint with low sheen Dulux Aquanamel and using high-density foam roller to achieve sprayed-looking texture • Finish neatly against the existing skirting boards and also IKEA base (may require some filling of gaps above plinth / kicker) • Caulk as required. Notes • Wardrobe is already fully assembled and secured. • Photos attached showing the areas to finish. Please only apply if you've completed similar built-in wardrobe or cabinetry work. Photos of previous jobs would be appreciated. Cheers,

Replace inside floor panel, back panel and side panel of laundry sink cabinet, qualified people preferred, need done in next 2 - 4 weeks, need to see photos of your previous work done (this needs to be done correctly and look good).

Hi there I am working on a new clients home and need some cabinetry made and installed. Please include photos of work you have completed in your offers or comments. Thank you

I have a walnut stained wall that needs to be finished, needs a smooth coat applied. Current coat is patchy / streaky.

Needing a qualified carpenter or experienced handyman to install structural timber support (blocking/noggins) inside my roof space. This timber needs to be installed between existing ceiling joists so that we can assemble a floor-to-ceiling room divider (L:180cm), ensuring it is securely tensioned and screwed into ceiling. - Please include cost of structural timber in quote (90x45mm (or wider)) - Please bring a vacuum for any dust/debris. Please note: You are only responsible for installing the timber support in the roof. We will handle the actual assembly and tensioning of the room divider once the timber is in place.

Kitchen installation of an ekitchen cabinets. All pre assembled. No benchtop installation required. The confirmatory measure has already been done. We want someone with either cabinetry or carpentry trade. Will need to possibly cut around PowerPoints etc. Part of one cabinet will not be able to be installed until after the benchtop is in.

I have ordered laundry cabinet from bunnings, i am looking for handyman to install it. The benchtop needs to be cut to fit the sink and tap.

Hello, need a handyman to do some minor work to make pool fence compliant following a recent inspection. There is a small brick ledge next to the pool fence that is interpreted as a climbable ledge. Need to install a 100mm wide piece of timber above that ledge to make it at least 900mm high from the ground. I would estimate the linear length of timber required would be 1.5m maximum. You need to supply the timber, cut it to length around the zig zag, and fix it to the brick wall so it does not come off over time. Please coat it with paint that we will supply. Please supply your own tools and equipment.

I have a kitchen cabinet that for lack of a better word has snapped!? The front panel seems to have broken away from the sliding part. I have pictures. Happy to negotiate.