Find experienced local carpenters in Landsborough

Fill a short form and get free quotes from local carpenters in minutes

4.5

Excellent rating - 4.5/5 (9200+ reviews)

A range of carpentry for all your needs
  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated carpenters near me

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What is Airtasker?

1

Post your task

Post your task

Tell us what you need, it's FREE to post.

2

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

3

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

Recent Carpentry tasks in Landsborough

Kitchen installation

$5

Landsborough QLD, Australia

29th Mar 2021

Two small L shaped kitchens. Kaboodle ( bunnings). All trades organised , I just need someone to put kitchens together. Have plans for both. Laminate bench tops.

Michael has been great from the start. He has done an amazing job of both kitchens I had him installed. I would highly recommend Michael if you need work done in a timely and professionally manner.

Modify and install bifold door

$500

Landsborough QLD, Australia

19th Aug 2020

I bought bifold doors that are too tall for our space so hoping they can be cut down and installed by a carpenter or builder. The opening may also need to be made higher also but not sure if this is possible.

BUILD US A CHICKEN ENCLOSURE

$500

Landsborough, Queensland, Australia

11th Oct 2019

Hi we are after a basic but quality chicken enclosure built in our backyard. Dimensions to be roughly 4m Wide x 4m Deep x 2m Tall. We'd like a simple gate to walk in and also want half of the enclosure roofed for shade. (roof to be pitched). Ground surface can be left as is, however the base must be very secure/solid to stop the foxes getting in. Please quote according to the attached styles including all materials and labour. We will purchase the chicken house to be built in at one end. We live in Landsborough 4550. Thanks, Chris

Create base for pool table/air hockey

$300

Landsborough QLD 4550, Australia

12th May 2017

Movers destroyed base of pool table need base built with ability to flip to air hockey

Install a Shade Shed

$125

Landsborough, Queensland, Australia

16th Jan 2017

I need a shade shed installed on Thursday 19, Friday 20 or Saturday 21 in Landsborough, 4550. The Shed will be 3m x 3m and is advertised to take no longer than 3 hours to erect using Hold Down Pegs into the ground. Full assembly video can be emailed or google shadesheds com au then FIND the Shade Sheds Assembly tab on the shade sheds page on the top right to see the video. Any questions please let me know. Chris Hold Down Pegs Hold Down Pegs These ground anchors are great for semi-permanent installation in good cohesive soil. Used for shade sheds and canvacon products and can maintain wind ratings below.

Fit French doors

$1,200

Landsborough QLD, Australia

28th Jan 2021

We have not purchased the doors yet but we currently have sliding doors around 1800x2000. We’d like to extend the opening to around 2100 or up to 2400. We have a block home. Will require a lintel I’m guessing for the structural support. I’d like someone to cut the opening and frame the opening to make the doors work. We haven’t purchased the doors yet due to needing advise on what size would be best for the space.

Re-stain inside of fence

$250

Landsborough QLD, Australia

28th Jun 2020

wash, light sand and re-stain inside of merbau fence. Approx 6m x 14m

Transporting a mostly dissassembled garden shed

$60

Landsborough QLD 4550, Australia

29th May 2019

Transporting a disassembled garden shed. So we'll have 4 flat walls and the roof will be in 2 pieces. So it'll be almost flat packed. the measurements are 2.7m x 1.8 m. It needs transporting from Minyama to Landsborough and there will be help at both ends to help load and unload it.

ASSEMBLE 5 ITEMS

$180

Landsborough QLD 4550, Australia

28th Feb 2017

I need an experienced maintenance persons to assemble the below items. I’ve estimated 5 HOURS work or less? 1. Garden shed. 1.5 x 1.9 x 0.8m . Image attached. 2. A small timber garden bridge. 1.6 x 0.7 x 0.3m. Image attached. 3. A timber Ikea storage box. 80cm x 40cm x 40cm. Image attached. 4. 2 x storage shelves. 2 x 2 x 0.6m. 3 uprights. 16 beams. 16 shelf panels. Image attached.

Fantastic job. Andrew went above and beyond what the task required and had all the right equipment to get the job done properly. Very knowledgeable and can help with just about anything around the house or garden. Highly recommended and will use again. Thanks again Andrew.

Granite kitchen bench top garage to kitchen approx 15 mtrs

$200

Landsborough QLD, Australia

8th Nov 2021

Granite bench top 1mtr x 2 Mtrs moved from garage to kitchen approx 15 Mtrs has to be lifted up onto kitchen floor from edge of new deck and then lifted onto Center bench - Due date: Needs to be done on Wednesday, 10th Nov 2021

HANDYMAN CARPENTER BUILDER

$1,500

Landsborough, Queensland, Australia

9th Dec 2020

I want to convert half of my shed into a suitable room. Looking for a handyman / carpenter / builder to carry out the following for labour only. - line the inside walls and ceiling with drywall and plastered ready to paint. - Skirting around the entire base - Architrave around 2 door frames and one small window - Divider wall through the middle of it with an internal door I will also need you to collect and indicate on materials needed. Dimensions are: 6m x 6m x 3m - Images attached. We are in Landsborough 4550 near Australia Zoo. Doesn't need to be done before March 2021 but obviously sooner the better. Any questions please let me know. Regards, Chris

HANDYMAN BUILDER

$1,900

Landsborough, Queensland, Australia

13th Nov 2019

I want to convert half of my shed into a suitable room. Looking for a handyman builder that can line the inside walls of my shed with drywall/plaster board including a divider wall through the middle of it. Skirting around the entire base , architrave around 2 door frames and one small window, plastered set up for paint. No ceiling required. Dimensions are: 6m x 6m - Images attached. We are in Landsborough 4550 near Australia Zoo. Doesn't need to be done before Feb 2020 but obviously sooner the better. Any questions please let me know. Regards, Chris Conder

Woodworker, Carpenter or Joiner

$180

Landsborough, Queensland, Australia

9th Oct 2018

Revised requirements - I'm looking for someone to cut 5 blocks out of 2 hardwood post i have then shape and dress each one according to the attached design. Any questions please get back to me. Many Thanks, Chris

BUILD AN OUTDOOR BBQ KITCHEN / BENCH

$1,400

Landsborough QLD 4550, Australia

28th Feb 2017

We'd like someone to quote on building us a small outdoor kitchen / BBQ bench. We do not know exactly what materials we would like the structure to be made of but to give you a better idea we would be very happy with anything that resembles the attached images. Dimension are roughly:- 2200 wide x 800 high x 1000mm deep mm Quick points: - Ideally we'd like underneath storage - No sink required - Bench to be fixed to ceramic titled patio / concrete slab flooring - Bar fridge optional depending on electrical wiring costs, there is a plug point close by - A drop in BBQ will be purchased for it. - Hoping a thick benchtop can be used from Bunnings or one in concrete?? - Gas hose is available so no need to make room for a gas cylinder. - Easy access We dont know what this sort of project will cost, so please give us a proposal and make us an offer to consider. Ideally to be completed by early April. Please post with any questions. Many thanks.