Find experienced local carpenters in Ipswich

The timber board that fallen off needs to be reattached. Best access will be from the roof, or with ladder from patio.

Hi there, We are looking for a carpenters to do the sheeting and architraves around the window an hourly rate. Thank you

I need a handyman/carpenter to adjust an existing steel support post under an outdoor timber beam. The top of the steel post is currently not properly aligned with the timber beam above, which has allowed the beam on that side to drop slightly by a few millimetres. The job should involve: Carefully pushing/pulling the existing steel post approximately 20mm into the correct position Making sure the timber beam is properly supported by the top of the post Securing the top of the post to the timber beam with 2 suitable structural screws/bolts Checking that everything is firm and properly supported afterwards The bottom of the steel post is already fixed into concrete, so it does not need to be removed or replaced. Photos attached. This should be a relatively small adjustment/fixing job for someone with the right tools.

Need to clean up white water based fence paints droplets from the window and wall. Self pint the fence but accidentally the spry malfunctioned nd reached the neighbour window and wall. Please see the picture attached

Quote Needed: Custom Garage Storage and Kitchen Drawers Looking for separate quotes for the two attached garage storage designs, including sliding doors: Design 1: Full-width storage unit Design 2: Shorter, lower-cost alternative If Design 1 is too expensive, we may proceed with Design 2. Please quote materials, labour and installation separately for each design. I would also like another separate quote for four kitchen drawers. Approximate available space: Width: 25 inches Height: 13.5 inches Depth: 21 inches Location: Bellbird Park

We have 4 wooden beams/posts on our back patio that need re-oiling and one out front. Need the job done carefully as we dont want oil on our tiles.

Looking for a carpenter to install a door for a room , we can quote

Looking for area in bedroom to be sanded and restained to match existing floors prior to new, smaller wardrobe installation.

I’m looking for an experienced cabinet maker or joiner to design, supply, and install a custom walk-in wardrobe and built-in bedroom cupboards in my new home at White Rock, QLD.

Looking for an experienced handyman or cabinet maker to help fix a approximately 2cm gap between the underside of my overhead kitchen cabinet doors and the rangehood slide-out fascia. ​I’m open to your professional advice on the best/easiest solution, but initial ideas include: ​Option A: Adding a ~2cm packer/spacer plate beneath the existing cabinet base to drop the rangehood down to align flush. ​Option B: Trimming/cutting down the bottom of the cabinet doors and installing a taller stainless steel rangehood front panel (fascine cover plate) to cover the gap.

Hi, I need help with a small internal carpentry/plastering job to turn an existing room opening into a proper bedroom entry. Work required: - Build/extend a small internal partition wall - Install a standard internal bedroom door and frame, approx. 820mm - Build a simple wardrobe recess/box, approx. 1200mm wide x 600mm deep, for future sliding wardrobe doors - Patch/plaster finish ready for painting No major structural work expected. I can supply the door, frame and provide photos/measurements. Happy to discuss whether you supply other materials or quote labour only. Location: Collingwood Park, QLD 4301.

Build 2 cabinets on either side of fireplace and build daybed to fit under stair case

I have few cabinets that I bought from ikea and new exhaust to be installed in my kitchen. Happy to get quotes.

Need someone to do framework and build some cupboards inside a horse float. Price for quotes.

I need a carpenter to install timber cornice in a bedroom. It’s a 3 m x 3 m room. We have the cornice already - it’s a timber 66 x 11 mm cornice. Need the corners mitred and lined up - so it looks finished.

Hi 👋 have a standard sized dishwasher I’d like to fit. Previous owner didn’t incorporate a space for a dishwasher… crazy. So require someone to modify cabinet under bench top. Have the cupboard pictured to scuttle - just a collection of bits to be re-distributed. Chasing someone who knows what they’re doing of course! 1) make the necessary cuts and removals 2) do a nice job of it 3) not damage existing counter top 4) dishwasher will be fitted / connected later by a plumber. If this is your gig, and you’re in the area, let me know cheers

Cupboard shelf needs fixing in long 3 sliding doors bedroom cupboard, reinforcement to hold weight and for shelf also. Only 1 damaged of 3 sections, full length to be reinforced. support into wall damaged, length of shelf bending and shelf on one end no longer nailed in. Photo available on request this will not allow me to add.

I need a cabinet maker to repair a kitchen cupboard door and review and refit the other hinges in the kitchen to ensure they’re all operating correctly

Wood panels (easy to install) approx 5 panels onto a brick wall in an entrance way. Have panels already. Just need someone who knows what he’s doing to cut to size and glue onto wall. Could lead to more Reno work

Hello, We are looking for a skilled handyman, joiner, or cabinet maker to repair a broken cabinet door at our retail store, in Orion Springfield Central. The Issue: A hinge on a cupboard door at our front POS counter has snapped. The door is now hanging unevenly and will not close, leaving it ajar. The Job: The task is to replace the faulty hinge to make the door fully functional again. The scope of work includes: 1. Assessing and removing the broken concealed (European-style) hinge. 2. Supplying and installing a new, suitable replacement hinge. 3. Securely re-hanging the door. 4. Adjusting the hinges to ensure the door is properly aligned, hangs straight, and opens and closes smoothly. Requirements: - MUST have experience with cabinetry repairs and replacing concealed/European-style hinges. - You must supply all necessary materials, specifically the correct replacement hinge. - You must supply all your own tools. - Public liability insurance is required. Location & Timing: Location: Orion Springfield Central, 1 Main Street, Springfield Central QLD 4300 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete repair. Your offer should include all labour costs and the cost of supplying the new hinge. Thank you.