Find experienced local carpenters in North West Perth

Looking for a tall foldable wooden prayer stool, similar to those in the attached, but taller. The ones on the market are too low for my arthritic knees. It will need to be tough enough to hold 90 kg, for daily use, and also lightweight and foldable, so that it can go in my suitcase. The tallest seating height should be around 25cm, though i can measure the non foldable one at home tonight to be certain. Some kind of non slip surface on the seat would be needed too. Does not need to be decorative or pretty. Function and sturdiness over flare.

Hello ! We have had some kitchen cupboard doors repainted and we need the new door handles screwed on and the doors put back in place Thanks

Looking for an experienced cabinet maker/carpenter to build a modern minimalist home office for two people. The wall measures approximately 3.2 m wide × 2.2 m high (see attached photos and inspiration image). We’d like a clean, modern built-in design with plenty of storage, while keeping the overall look minimalist. We’re happy to use IKEA cabinetry (or similar) where possible to keep costs down, combined with a custom benchtop and finishing to achieve a seamless built-in look. We’re open to design ideas that achieve a high-end result on a reasonable budget. There will also be additional work available for the right person, including building a custom electric fireplace feature, wall panelling, floating shelves, and other built-in cabinetry throughout the house. If you’re experienced with this type of work, please send through some photos of previous projects and a quote. Looking forward to hearing from you!

I have a small mezzanine void I’d like covered with a custom removable timber slatted panel. Photo below, measures 1365 x 1010 approx wall to wall not a large space it’s internal stair void.

After a cabinet maker or someone with qualified skills to create these custom made trolleys. Looking for a beige colour but image as a guide. Are you able to source materials and custom make these for salon use? Let’s talk

I need some plywood panels to be cut to precise dimensions for a furniture project, about 10 cuts

Repair rotten timber at bottom of front door frame

Hi there, would like to have our front deck sanded and re-stained a lighter walnut colour. Deck is in good condition but has paint flecks from recently painted balustrade and is stained a jarrah look which we’d prefer to lighten. Approx 16sqm, plus 2x perimeter boards along each face edge. Please advise price & availability.

I’m looking for an experienced cabinet maker to manufacture and install custom cabinetry for my new home. I have measurements and drawings available for all the cabinets, which can be used to prepare a quote. If you prefer, you’re also welcome to visit the property to verify or take your own measurements before starting. I’m looking for someone who can supply the materials, build the cabinets, and complete the installation to a high standard. Attention to detail and quality workmanship are important. Please include the following in your quote: * Manufacture of the cabinets * Supply of materials * Installation * Estimated timeframe * Any warranty on workmanship If possible, please also provide photos of similar cabinetry projects you’ve completed. I’m happy to discuss the design, finishes, and any recommendations you may have to achieve the best result. Looking forward to receiving your quote.

Install prebuilt Ikea kitchen cabinets. Base cabinets to be installed by Thursday 5pm at least for benchtop measure. There is one high cabinet, 6 wall, 7 base cabinets.

Three shelves on either side of the fireplace. Dimensions 117 cm wide by 109 cm high on the right. 118 cm wide by 109 cm on left. Floors are Jarrah, would like to match with Jarrah shelves or at least colour depending on cost. Style is clean and elegant, Old English style.

Need to make the holes in the laundry slab bigger to fit the wiring and washing machine pipes

Replace inside floor panel, back panel and side panel of laundry sink cabinet, qualified people preferred, need done in next 2 - 4 weeks, need to see photos of your previous work done (this needs to be done correctly and look good).

Hi there I am working on a new clients home and need some cabinetry made and installed. Please include photos of work you have completed in your offers or comments. Thank you

I have a walnut stained wall that needs to be finished, needs a smooth coat applied. Current coat is patchy / streaky.

Needing a qualified carpenter or experienced handyman to install structural timber support (blocking/noggins) inside my roof space. This timber needs to be installed between existing ceiling joists so that we can assemble a floor-to-ceiling room divider (L:180cm), ensuring it is securely tensioned and screwed into ceiling. - Please include cost of structural timber in quote (90x45mm (or wider)) - Please bring a vacuum for any dust/debris. Please note: You are only responsible for installing the timber support in the roof. We will handle the actual assembly and tensioning of the room divider once the timber is in place.

Kitchen installation of an ekitchen cabinets. All pre assembled. No benchtop installation required. The confirmatory measure has already been done. We want someone with either cabinetry or carpentry trade. Will need to possibly cut around PowerPoints etc. Part of one cabinet will not be able to be installed until after the benchtop is in.

I have ordered laundry cabinet from bunnings, i am looking for handyman to install it. The benchtop needs to be cut to fit the sink and tap.

Hello, need a handyman to do some minor work to make pool fence compliant following a recent inspection. There is a small brick ledge next to the pool fence that is interpreted as a climbable ledge. Need to install a 100mm wide piece of timber above that ledge to make it at least 900mm high from the ground. I would estimate the linear length of timber required would be 1.5m maximum. You need to supply the timber, cut it to length around the zig zag, and fix it to the brick wall so it does not come off over time. Please coat it with paint that we will supply. Please supply your own tools and equipment.

I have a kitchen cabinet that for lack of a better word has snapped!? The front panel seems to have broken away from the sliding part. I have pictures. Happy to negotiate.