Find experienced local carpenters in South Brisbane

I’m looking for an experienced carpenter/joiner to reface cabinet doors and panels in my kitchen and living room. Currently, all cabinetry is finished in black textured laminate, and I’d like to update it to a brighter, modern finish such as: * off-white * beige * light timber The new finish should complement: * light grey cabinets (fridge side) * black marble benchtop & splashback * dark timber flooring 👉 Please refer to photos for full scope 🔧 Scope of work Reface all listed cabinet doors, drawers, and panels 📐 Measurements (approx.) Cupboards in living room * Double door broom cupboard: 2 × (37 x 227.5 cm) * Double door lqundry cupboard: 2 × (58 x 239 cm) Kitchen drawers * 3 large drawers: 23 x 92 cm each * 3 small drawers: 23 x 37 cm each Appliances * Dishwasher panel: 60 x 60 cm * Rangehood cabinet (double): 2 × (69.5 x 51 cm) * Rangehood: 2 side pieces: 21 x 8 cm & Front cover: 60 x 8 cm Cabinets * Lower double door cabinet: 2 × (75 x 45 cm) * Upper single cabinet door: 54 x 78 cm * 2 new doors: 30 x 36.5 cm * Upper cabinet side panel: 78 x 39 cm * Under benchtop side panel: 67.5 x 90 cm * Under benchtop back panel (facing living room): 212 x 90 cm (currently its divided in two panels refer photo but I want 1 panel, dimesion given accordingly) * Back panel cabinet door under benchtop (facung living room): 52 x 90 cm * Bottom panels for lower joinery in kitchen (L-shape): 11 x 115 cm & 11 x 199 cm 👉 Please also allow for filler panels (top, bottom, sides) where required. --- ⚙️ Additional details of opening mechanism * Bottom cabinets/drawers: finger pull * Upper cabinets: push-to-open * Cupboard doors: with handles --- 💰 Budget I’ve entered a placeholder budget — 👉 please provide your quote based on scope including materials, labour, and transport of material Looking for: * Experienced carpenter/joiner * Attention to detail (finish is important) * Ability to advise on best material/colour

Carpenter to make a box for a built in bath tub for bathroom renovation.

Needing a bedroom door replaced, I have hinges and door handle just needing someone to get a door and install everything for me

Hi, I’m looking for an experienced cabinet installer for a small laundry setup. Scope of work: * Assemble and install base cabinets * Install benchtop across cabinets * Cut-out for sink and install sink * Space for washing machine and dryer (no cabinetry needed for appliances) * Install tall cabinet on the right side * Secure all cabinets to wall and level properly * Silicone finish Details: * All cabinets will be supplied (flatpack) * Standard laundry size (see photo attached) * Existing plumbing in place Please quote including: * Labour * Tools required for benchtop cut-out * Installation only (plumbing connection can be separate if needed)

Install a freestanding dishwasher Job include adjust cabinet to fit dishwasher, connect inflow and outflow of water,connect to electricity.

Drill hole in cabinetry panel for washing machine hose to go through Undo deadlock screws to add on the cover plate, reassemble

Replace External Timber Stairs

I purchased this from Bunnings: https://www.bunnings.com.au/specrite-2700-x-600-x-21mm-oak-timber-acoustic-panel_p0455959 I would like it to be cut and installed on the edge of my fridge cabinet, which measures approximately 600mm wide and 2100mm high. I'm looking for a clean cut, so it looks as close to built-in as possible. The tasker must use appropriate method and tools for this material (e.g. cut from slat side, tape to prevent tear-out, fine-tooth blade). They must also have the ability to tidy and reinforce the cut edge (glue/re-secure slats if needed). Hoping to have it installed using adhesive (no visible screws) with the panel to sit flush with cabinet face. I can provide the instructions if need be and I'm happy to pay for quality. Cheers, Alex

Hi, I have a small burn mark on my laminate floor caused while cooking. The damaged area is about the size of a small spot (see photo attached). I’m looking for someone experienced in floor repair to: I do NOT want full floor replacement — only a small repair. Thanks!

remove and install new 900mm wide melamine board in cabinet under kitchen sink

Install 2x3 wooden shelves in kitchen Install wooden shelves and panel in laundry Remove two wall mirrors and install vj panelling

I want someone to do the eaves for my new granny flat and sunrooms, it’s about 40m and 44m long, we want supply and install please, no materials

Measure and purchase timber rail and white brackets for stairs and install (will pay for items purchased)

2 walls closed up Framed up , Gybrock walls ready to paint( owner will paint) Start tomorrow Friday 9am At coorparoo warehouse Timber and material supply by owner. See photos **

Kitchen drawers need to be made to fit this space. 4x drawers required. Have tried to source with various suppliers but the drawers are so old that a whole new set to fit the space needs to be built. Do not have measurements. Will need a measurement done and then drawers built and then return to site to install drawers, unless it can be done onsite.

I have 3 Kaboodle (Bunnings) Kitchen Cabinetry needing installation and also 5 tall lockers. These are in flat packs. All installation to be done within the same day.

Need to replace a door that has water damage. The bottom bit connected to the deck also needs to be repaired as I don't know what bits have rotted. The door needs a ledge on top (or an alternate fix) to stop rain water from being collected at the foot of the door. Will pay for materials ( such as door) seperatedly. Thanks

I am looking for a qualified Carpenter and/or Plasterer to repair damage in a downstairs rumpus room caused by a previous leak. The leak has been addressed and rotten wood removed, but I now need the following remediation work: • Carpentry: replace/reinforce timber framing in the corner where wood rot has occurred. This includes the area around the window lintel/header and the ceiling joist corner. • Window/Door Frame: Repair or replace the timber reveals/frames that were removed during the investigation. • Plastering: Replace the missing section of the ceiling (plasterboard), install new cornice to match existing, and patch/set the wall areas. • Finishing: Sanding and repainting. • I am currently seeking to understand the scope and cost of the work. This $50 task is for the site visit and formal quote. 2. Once the quote is agreed upon, I will increase the task price to the full quoted amount to cover labor and materials. Thank you

Hello, and thank you for reading. I’m looking for some help to assemble 2.5 heavy-duty garage shelving units. They’re quite sturdy, so this may best suit two people with experience assembling similar shelving. When: This evening (20/12) from 5pm to 9pm or Tomorrow morning (22/12) from 7:00am, and must be completed by 1:30pm at the latest. Task details: • Assemble 2.5 heavy-duty shelving units • Some light repositioning within the garage while assembling • Alternatively, they can be assembled directly in the garage if that’s easier • I can assist a little if needed • I have some tools available, but if you have your own that would be appreciated Location: Camp Hill Budget: Please make an offer, and let me know your experience and whether you’ll be working solo or as a pair. Thank you in advance.

Sand, stain - Need a semi-pro who knows what they’re doing here! Will need someone who has the gear / equipment required. Need to work around weather. I’ll reimburse you for all materials with receipt.