Find experienced local carpenters in Gungahlin

Need the kitchen cabinet on top of the fridge resized - the cabinet is currently too tall and needs length taken off the top or bottom to make space for the height of the fridge.

Sand and stain deck. Roughly 30sqm. Photo attached is from when it was first built. We will supply the stain and any other items required excluding sander.

I need to put planks in bed , on top.of the existing slats for additional back support. How can you assist? Perhaps, one big piece of plywood on top of the existing slats.

After someone experienced to supply and install vertical panelling around 3 sides of laminex kitchen island bench. 2.5m (L), 87cm (H) 2 x sides of 61cm ea. Seeking cost estimate, timing as well as product and supplier/manufacturer. Preferred contact msg, text or email. Open to offers to consider Added example picture for some guidance. Looking for light colour, scandi look. Many thanks!

I have a Chinese MDF bed frame where the side rails and corners are starting to crack and pull apart (see photo). The MDF alone cannot hold weight, so I need someone who can reinforce the structure properly. Job includes: Adding three or four solid wood beams to back of headboard for support. Looking for someone with carpentry/handyman experience who can make the frame strong, stable, and long-lasting. I will pay for materials or reimburse with receipt. Please bring tools and recommend the best reinforcement method.

Shortening exisiting cabinet by 100m

I need a Shopfitter/Cabinet maker or carpenter with interior experience to help chop out the last few days of a fitout. 2-3 days work

Cabinet with two tiers with four drawers on each tier External dimensions not to exceed 2400 (wide) x 450 (deep) x 450 (height) mm cabinet to be made from laminex spotted gum veneer Drawers to have bevel edges with soft close No legs required

Need to build a cabinet in a corner part of lounge room for display and storage shelves

Two pieces of wood I’ll provide. Need to cut two arches at the top. Can use jigsaw or router . Own tools

Need to build a trap door on a deck (area currently has removable planks). The trap door should be secure for people to walk on it when closed. Loose planks are available for use.

I need to fit my wash tower but l need help to remove a top cabinet and part of bench top.

Outdoor kitchen door replacement.

I am going to built owner builders 46 Square meters Granny flat on top of the existing garage. I am looking for a qualified Carpenter who is semi retired and want to earn some extra income on the side.

Recently install gas cook top & gas plumber unable to fixed the kitchen drawer as power shocked back side wall is between , so need to adjust drawer to make it fit

Looking for a cabinetmaker - I need to move microwave to an existing base cabinet (there is an existing power point) and cut and resize the door to fit bottom cabinet only.

Replace moist architrave and skirting board, plus a small part of an additional skirting board

We have a large aquarium stand (70cm high x 75cm wide, the grey frame) that we need to enclose with two custom-made doors. These doors should allow easy access to the filtration system underneath the tank. We’re flexible on the type of wood, but ideally it should match the existing finish on the stand’s roof. Please note: - The aquarium is full and cannot be moved. - Once the doors are ready, we can either install them ourselves or you’re welcome to handle installation—please quote accordingly. If you're interested or have any questions, feel free to get in touch!

Need to check if the timber frame that has deteriorated due to water leak need to be replaced/fixed and the plastering of the wall that was cut

Pull out laundry draw has broken