Find experienced local carpenters in Brisbane Bayside

We have an old kitchen connection kitchen - and a dishwasher space that won’t fit standard dishwasher specs. The dishwasher in the space has died and was only just able to fit with sides and top adjusted. They no longer make this size or style. We need help to open the dishwasher space up by a couple centimetres allowing us to remove the existing dishwasher and fit a new free standing one. The kitchen is due for a reno, but we desperately need this dishwasher space to work while we wait to reno. We believe one side of the cabinet can be adjusted to support this work - see photos showing cupboard with glasses - this is the side that would need to be adjusted. Flexible with times and day.

Hi! We’re looking for someone to install eight solid pine shelves. They’re already cut to size, approximately 1–1.35 m long and 235 mm deep. We’re supplying three white brackets per shelf. * Office 1 — Three shelves in a nook above a desk * Office 2 — Two shelves above a desk * Office 3 — One shelf above a desk and two above an armchair The brackets need to be fixed into metal studs, and the shelves will hold books, storage and décor. Please supply the appropriate screws and fixings as part of the job. We’ll confirm the shelf positions with you on the day. Please let us know your earliest availability. Thanks!

Hi! Hopefully a quick job. Just need to add a moulding to the top of my kitchen cabinetry and hoping to find someone who can cut and install please. Photos of cabinetry and reference photo for the moulding attached.

Looking for meticulous, highly experienced painter/handy tradie to restore, prep & stain multiple outdoor timber features on our premium property. Since this timber sits directly adjacent to high-end finishes (stone cladding, glass balustrades, tiled spa shell & composite mod-decking), extreme attention to detail and rigorous masking/protection are strict requirements. Scope of Work: 1. 6 Sets of Timber Stairs: Spot treat weathered patches with a chemical cleaner, light sand & stain (treads and risers). 2. Curved Slatted Batten Screen: Light wash, sand & precision stain (requires careful brushing/rolling between gaps from both sides). 3. 7 Vertical Columns & Surrounding Ledges: Light sand & stain. 4. Spa Coping: Deep prep & stain the timber frame directly surrounding the spa. Job Requirements: • Rigorous Protection (Crucial): Must spend adequate time using premium painter’s tape and drop sheets. Absolutely zero overspray, splashes, or chemical runoff is permitted on the stone walls, glass fencing, tiles, or composite decking. • Preparation: Use supplied timber cleaner on the weathered steps/coping to strip the grey dead cells and open the grain. Give all surfaces a uniform light sand so the final stain blends evenly between the weathered and unweathered sections. • Coats: Apply 2 coats of premium timber oil in a Merbau/Spotted Gum tone to match our adjacent mod-deck). Materials & Tools: • I will supply: The chemical timber wash & the premium timber stain/oil. • You must supply: An extension ladder capable of safely reaching the second story columns, precision sanding equipment, scrubbing brushes, high quality painters tape, protective drop sheets & application tools (brushes, mini rollers, trays, pads) Please view the attached pics to see exact layout and scale. In your offer, please confirm your experience working around sensitive surfaces like stone and glass. Other than this there are 2, 3, 4 & 6 tread stair cases of which only the 2 tread is weathered.

Looking to get a backing wood board installed (probably something like 120cm x 25cm x 3cm oak) and then the rail installed for hanging clothes in the laundry room (AI mock up photo attached). The house is a new build and so it is all timber frame/plasterboard with some electrics behind and so will need someone with stud/metal/magnet detector to ensure no wiring is hit. Shelf to be installed above. I can provide materials (wood board, shelf, rail) but will need you to provide fixings etc.

Not sure if anyone is available today, but we thought it was worth a try! We’re looking for a handy, practical person to help us get our new Bloom Cycle workspace in Belmont, Brisbane, set up today. We’re a small social enterprise making timber trophies and awards, and need an extra pair of hands to get everything organised and functional. Tasks include: * Set up and securely mount a manual mitre saw and drill/workstation. * Help work out what else we need for a safe, practical woodworking area. * Potentially make a trip to Bunnings to pick up any required supplies. * Move and organise hardwood timber. * Unpack and organise general boxes and equipment. * Assemble/set up chairs, printer and other office items. * General workshop organisation and setup. BONUS: Experience setting up an xTool laser cutter would be amazing, but definitely not essential! Ideally, we’re looking for someone handy with tools, comfortable moving timber and equipment, and able to take initiative. You may need to help identify and purchase additional supplies from Bunnings. Location: Belmont, Brisbane When: Today, Tuesday 27 October – ASAP Please let me know your availability, relevant experience, whether you have your own tools, and whether you’re able to assist with a Bunnings trip if needed.

Job title: Kitchen Cabinetry Modification & Dishwasher Installation Looking for a qualified and experienced cabinetmaker/carpenter to modify existing kitchen cabinetry to accommodate a new dishwasher. Scope of work: * Modify the existing kitchen cabinetry to create space for a dishwasher in the designated area near the current tap/plumbing location. * Reconfigure the cupboards to the right of this area to accommodate the dishwasher. * Remove and adjust existing cupboard doors as required. * Refit one of the cupboard doors at an angle beside the oven on the far right-hand side of the kitchen. * Complete any necessary cabinetry adjustments and finishing work to ensure everything looks neat and professionally integrated. * Coordinate the dishwasher installation and plumbing connections as required. Additional information: * I will supply the dishwasher. * Please provide a quote for labour only, excluding the cost of the dishwasher. I will be providing a 45cm dishwasher. Please note that the dishwasher would be where the tape measure is in the photos. And then cupboards would need to be fixed and reinstalled next to it for a clean finish.

Need cabinetry cavity done and dishwasher installed for a Westinghouse WSF6602WC. The dimensions for the cabinet are: Height 862mm Width 550mm Depth 525mm But there is an adjoining corner cupboard or the middle cupboard that can be cut into. Please message me with your best quote. There will be a powerpoint installed for the dishwasher already.

Task Description: Looking for someone to prepare and apply 2 coats of exterior paint/oil to a timber pool deck. I will thoroughly high-pressure the deck of all debris beforehand. The timber will be completely dry and ready. Job Details & Scope: • Total Deck Area: Around 25m² next to the swimming pool. • Required Work: Prepare (chemical deck cleaner/brightener and scrub the timber to prep it if nedded) and apply 2 coats of exterior timber coating evenly across the deck. • Materials: This is a labour-only quote. I will supply the premium paint/coating/chemicals etc myself. Please let me know if I also need to buy other stuff you need. Please provide quote with what is included and not. Thanks!

Hi! I’m looking for someone experienced to supply and install approximately 7 timber shelves across three rooms in Capalaba. The shelving we’re after is fairly straightforward: Room 1: 2 wall-to-wall shelves fitted into a recessed nook above a desk. Room 2: 2 shelves mounted above a desk. Room 3: 3 longer shelves mounted above a desk. We’re after simple, straight timber shelves cut to size, with clean, minimal brackets (ideally warm white). The shelves will need to be sturdy enough for storage, including heavier books. Ideally, we’re looking for someone who can measure, source the materials, cut everything to size and install the shelves. However, we’re also happy to supply the timber ourselves if that makes things easier. We’re looking to have the shelves installed between Friday 16 and Sunday 18 October, preferably on Friday or Saturday. I’ve attached photos of the rooms for reference. Please let me know your availability and whether you’re able to supply the materials. Thanks so much!

See photos, looking for a carpenter/ handyman to replace wood as per photos. Please quote your labour charge and after seeing the job, I can purchase the new wood for the job. Easy job for someone who does this. Will need wood painted. I have the paint,

Rejuvenation and staining of 2 x outdoor decks

I have purchased a radius stainless steel snorkel for my GU patrol series 4, I have everything needed to fit the snorkel but not all the necessary tools in order to do so and would like someone to come help got it for me

Our dog has scratched and chewed the edge of our stained hardwood front door and the adjoining timber frame. I attempted to repair it with filler, but the result is unsuitable and needs to be removed and professionally redone. The job requires: * Repairing or splicing the damaged timber as required * Sanding and reshaping the edge neatly * Colour-matching the existing stained timber * Sealing and refinishing the repaired areas Located in Cleveland, QLD. Please only respond if you have experience repairing and colour-matching stained hardwood. Include photos of similar work.

Need a cabinet replaced or fixed in my bathroom

Require someone to come and do a couple of small stainless tac welds where it has broken off for trolley wheel

Carpenter/Handyman Needed - Wooden Wall Panels | 4164 Hi everyone, I'm looking for a reliable and experienced carpenter or tradie to install wooden wall panels on a living room feature wall in the 4164 area. I have 6 wooden panels already provided. The job will involve: Installing the 6 panels securely studded onto the living room wall Cutting the panels neatly and accurately to fit around the TV, air conditioner and power point Bringing your own suitable cutting tools/ equipment to cut the panels on site Making sure the finished result is clean, level and professionally finished Ideally, someone experienced with feature wall/ panel installations I'm looking for someone who is reliable, takes pride in their work and can do a neat, quality job, especially with the cuts around the existing fixtures. Timing: Ideally on between 28-30 August Please comment or message me with your availability, experience and quote. Photos of similar work you've completed would also be appreciated. 📍Location: 4164

The timber board has fallen off our loft man hole / window , we want it done professionally and glued back on. Please inspect first to quote as we may need a whole new timber window. Its on hinges

Cut up an old timber hut, no cleanup Chainsaw would be ideal

Need the back deck sanded and stained