Find experienced local carpenters in North West Perth

Converting a full-height fixed/sliding window section into double doors

Hey! I have a kitchen cabinet door where the concealed hinge unclipped/detached from the frame beneath the counter. It’s a super quick 15-minute job, just needs to be snapped/screwed back in properly. Would you please provide me a fair price for you to swing by and fix it? I can send over a couple of photos as well!

5 x Water and sun damaged jarrah windows frames. Needs sanding and parts replaced/repaired: wooden frame and window putty.

We need to get wooden slates installed in recess and bar cabinets installed in another recess

Looking for an experienced carpenter or handyman to build a neat custom cupboard/enclosure around electrical boxes in the open office area of our new allied health clinic in Butler. The purpose is to hide the electrical equipment and make the area look clean and finished, while still allowing easy access to the electrical boxes when required. The area is approximately 2400 mm wide, with a ceiling height of approximately 2980 mm. Final measurements would need to be confirmed on site before construction. We’re looking for a simple, clean white finish Please let me know: * Whether this is something you can do * Your approximate quote * Whether materials are included * Your availability

I desperately need some storage in my house for linen, stationary, vacuum cleaners etc and I have a large blank wall for this to be built into. I need some advice and quotes. The pics are AI roughly to what I want. Budget not limited to 1000

need a laundry chute either blocked off. Or attached to a bathroom vanity. Whichever is the easiest option. Doing a bathroom reno, tilers here today and said to bloock it off today so they can tile over or do job after they finish nut may mess up tiling. In old bathroom laundry chut went from inside vanity hole in floor, down to laundry downstairs. Hole is covered by the white square board at present. Floor has been screeded and waterproofed now and tiling has started

Install 2 sets of upper laundry cabinets to the wall. Install 2 end panels. Attach 4 cabinet doors. Measure and level.

I have two otherwise clean and functional toilets with stubborn yellow/brown staining inside the porcelain bowls, particularly under the rim and in vertical streaks. The toilets have been regularly cleaned with normal toilet/bleach products, but the staining has not shifted. The cisterns are brand new, so I’m looking for someone experienced in removing old mineral/calcium/limescale or rust-type staining from porcelain toilets, rather than a standard bathroom clean. Task is for 2 toilets only. Looking for someone who: * has experience removing stubborn toilet-bowl staining/scale * can supply the appropriate professional descaling products and equipment * will use products/methods safe for glazed porcelain * will properly treat and scrub/descale both bowls, including under the rim Photos show the current condition. I understand very old staining may not come out 100%, but I’m looking for someone confident they can make a significant improvement.

Joinery / Cabinetmaker Wanted – Oak Feature Finishes Looking for an experienced joiner/cabinetmaker to complete some custom natural oak-style joinery as part of a home renovation in Ocean Reef. Scope includes: * Oak-style shelving and cabinetry around a media wall * Feature oak shelves with concealed LED lighting * Oak finish/detailing to a coffee nook, including shelving and matching cabinet doors * Clean, modern, high-end finish similar to the attached inspiration photos Most of the main construction is already underway — I’m looking for someone who can measure, manufacture and install the feature joinery to a high standard. Location: Ocean Reef, WA Timing: Ready to discuss/measure now. Please message me with examples of similar work, availability and an approximate indication of pricing.

Extension/replacement of laundry worktop X 2 shelves 1 coffee station/cabinet 1 linen cabinet 1 overhead fridge freezer cupboard

Deck is 480cm x 680cm. Currently dark stain and hoping it can be stained a lighter colour. Several boards will need replacing towards the end as they have weathered over the years but I have a mate to do this.

Looking for a painter or similar to stain our stair handrail to match our floors.

We are looking for a quality cabinet maker to make a bespoke floating tv cabinet for under our TV. We would like it to match exactly our kitchen cabinets.

Job Post – Timber Partition Wall Installation (Yokine) Title: Carpenter needed – Timber stud partition wall, Yokine (complete by 19 Aug) Looking for an experienced carpenter to build and install a timber stud partition wall in a retail shop in Yokine, Perth. Details: Location: Yokine, Perth Wall size: Length 3 m, width 2.8 m, height 2.9 m Finished wall thickness: 120 mm (standard stud construction) Must run from floor to ceiling with no gaps Client will supply the wall cladding for both the front and reverse faces Scope: Supply and install timber stud framing, then fix the supplied cladding to both sides Must be completed by 19 August 2026 Please provide: Your availability to start and finish within the required timeframe An itemised quote (labour + any framing materials) Relevant experience with similar partition work Happy to arrange a quick site visit for accurate measuring if needed. Looking for a reliable tradesperson who can deliver a clean, professional finish on schedule.

Hello, I'm looking for someone with experience in cabinetry, built-in wardrobes or joinery to finish an IKEA PAX wardrobe install to make it appear built in and a tidy finish. Scope of works 1. Install infill/filler panels • Fill the gaps between the wardrobe and the side walls with 16mm MR MDF. • Scribe the panels to the walls where required so everything sits flush. • Ideally use moisture-resistant MDF or similar ready for painting. 2. Install a kicker/plinth board • Cover the existing timber base with a neat kicker/plinth with either 16 or 18mm with 16mm MR MDF. • Continue the plinth across the full width so it appears built in. • Minimise visible joins. 3. Finishing • Light sand and prime final cut and fitted pieces • Colour match GRIMO door at Dulux trade centre • Ideally, paint with low sheen Dulux Aquanamel and using high-density foam roller to achieve sprayed-looking texture • Finish neatly against the existing skirting boards and also IKEA base (may require some filling of gaps above plinth / kicker) • Caulk as required. Notes • Wardrobe is already fully assembled and secured. • Photos attached showing the areas to finish. Please only apply if you've completed similar built-in wardrobe or cabinetry work. Photos of previous jobs would be appreciated. Cheers,

Replace inside floor panel, back panel and side panel of laundry sink cabinet, qualified people preferred, need done in next 2 - 4 weeks, need to see photos of your previous work done (this needs to be done correctly and look good).

Hi there I am working on a new clients home and need some cabinetry made and installed. Please include photos of work you have completed in your offers or comments. Thank you

I have a walnut stained wall that needs to be finished, needs a smooth coat applied. Current coat is patchy / streaky.

Needing a qualified carpenter or experienced handyman to install structural timber support (blocking/noggins) inside my roof space. This timber needs to be installed between existing ceiling joists so that we can assemble a floor-to-ceiling room divider (L:180cm), ensuring it is securely tensioned and screwed into ceiling. - Please include cost of structural timber in quote (90x45mm (or wider)) - Please bring a vacuum for any dust/debris. Please note: You are only responsible for installing the timber support in the roof. We will handle the actual assembly and tensioning of the room divider once the timber is in place.