Find experienced local carpenters in ACT

Posting on behalf of a business for a customer. have a wooden buffet cabinet with a marble top where the doors are not closing evenly. Initially we thought it was a hinge issue, but after inspection it appears the marble top in the centre section is slightly larger (approx. 1–2mm), which is affecting alignment. Looking for someone experienced with stone or cabinetry work who can assess and potentially grind/adjust the marble safely to resolve the issue. The goal is to have the doors align and close properly without damaging the piece. Located in Richardson. Flexible with timing.

needs to be done:  1. Install three IKEA BILLY bookcases and two pegboards, and secure them to the wall  2. Use a detector to locate the wiring inside the wall  3. Cut openings in the backing panels to fit around the wall switch and the light, or remove the light if needed

Removing glued timber from side rail. Please see pictures. Pointing finger- this timber need removing. 2 prices of side rails. After removing glued timber may need to sand polish rough surface

I need a 6m x 13mm (walls appear to be about 1.5mm) stainless steel rod. Bent into either a stacked square or made into a circle, final product needs to be no more than 250x300x300mm can subtract some rod to make it that size. I already have the rod and can bring this to you in candberra as I doubt the equipments very portable

We need someone to put some screw to secure the shelf into the stainless steel bench. Easy job if you have the right tools

Looking for some help with mounting walnut wood rods to wooden paneling with an insulated metal board behind. The rods just screw in so really the only fixing is the flanges. Hoping for minimal damage to the paneling if eventually removed but needs to hold the weight of the canopy

Repaint water stains 40 cm by 80 cm on the ceiling. Silicone seal covers one metre on the kitchen bench. Photos attached for reference.

My cabinet is not open and closing properly. Need to get it fixed

We require someone to clean and stain our deck - app 45sqm

Looking for someone to build and instal the IKEA METOD High Cabinet with shelves (40x60x200cm) in my office. It would need to be built, affixed to the wall (I would need you to please supply brackets/screws etc for this), and have the legs, cover panel & plinth cut to size & affixed (I would need you to supply the tools for this). The cabinet & cover panel will also need a hole drilled in the side to allow cords to run throughout.

Please help me remove my mirrored shaving cabinet from bathroom 600m wide 620h 160m d

The door to my kitchen cabinet fell off and the other side is falling off too, would need new hinges please help us fix it!!

Want to replace an under-bench laundry hamper cabinet with a clothes dryer. Note that it is currently supporting the stone top bench, would need some supporting insert refashioned from cabinetry.

We have a deck rail made of wood. We are about to get roller shutters installed and the deck rail needs to be shorter to fit the roller shutters. The company installing them said we would need to arrange this. You would need to use your own tools. The rail is approximately 35 mm thick. The piece to remove would be approximately 140 × 140 × 35 mm. There will be 2 pieces to cut off, one at each end of the rail. I have attached 3 photos, but there are only 2 bits to cut. We need to get this done before the roller shutters are installed. I don't have a date yet, but it will be in the next few weeks. Probably the sooner, the better.

Fix chipped wooden skirting boards.

I’d like to oil the deck and fix the patio doors (missing weather strips).

I am looking for someone to pressure wash a weathered timber fence in preparation for a stain application. The fence is one-year-old and weathered and needs a thorough clean to remove dirt, grime, mildew and built up residue so the stain can properly adhere. This task is for cleaning only. No staining or sealing is required. Scope of Work • Pressure wash timber fence panels and posts • Remove surface dirt, mould and weathering build up • Take care not to damage timber with excessive pressure • Leave the area tidy once completed Requirements • Must have your own pressure washer suitable for timber • Ability to assess appropriate pressure to avoid timber damage Fence Details • Standard residential timber fence • Weathered condition • Ground level access

I have lovely wooden panels from a bed surround and I would like them made into a free standing bed head.

After someone experienced to supply and install vertical panelling around 3 sides of laminex kitchen island bench. 2.5m (L), 87cm (H) 2 x sides of 61cm ea. Seeking cost estimate, timing as well as product and supplier/manufacturer. Preferred contact msg, text or email. Open to offers to consider Added example picture for some guidance. Looking for light colour, scandi look. Many thanks!

One of the legs of our dining table recently broke. We need a handy carpenter to either rebuild the leg, or fix the current one. Click on below dropbox link to see PDF containing images and details of the break. https://www.dropbox.com/scl/fi/yedzvkixliwfwil7o04j8/Our-dining-table.pdf?rlkey=dg6pqiic0g2pkayyxz56j8k1t&dl=0