Find a local Tasker to inspect your Ford near you

Coolant leak causing car to reach high temp. Here is a brief guide I found. https://m.youtube.com/watch?v=COrgNHqZadw&pp=0gcJCTIBo7VqN5tD

Motor is ready. I started the job, removed trim, but haven't got around to finishing.

Canopy is a different colour white to the rest of the body. Prefer the canopy white, so wanting a colour match and respray for the body of the car.

I’m looking for someone experienced in bull bar installations to fit a Next Gen Ford Ranger Raptor bull bar (Diablo – Pre-Runner style) to my vehicle. The bull bar and all required parts will be supplied by me. I’m after a reliable installer who is familiar with this type of work and can complete the installation within one day. Happy to discuss timing and location with the right person.

Changed over a few things to clean up engine bay. Timing and distributor needs someone to come make sure it’s working well. Timing is out

Two qualified tradies to fit a 3M long campervan rollout, cassette type, van awning. It's heavy, and you will be working over 2M off the ground. It has three mounting plates that need to be attached to the van and the awning clipped and screwed onto the side of the van. S/S hardware and RVT adhesive/sealant supplied. Skilled Tradesmen only. P.S Common guys. It's only six bolts, and some adhesive sealant which I will supply anyway

2010 ford territory fuel pump needs to be installed.

Ford Transit 2008 Diesel Turbo 280k km. Already owned. Driving feels fine. Needs checking (priority order): Check Engine light (MIL). It is currently on. Is it safe to drive? Actuator is not working at the moment. Oil level/condition, oil leaks, filter housing, oil pressure switch/sensor & wiring. Quick OBD scan (if relevant) for any related codes Basic engine health: noises, smoke, coolant/oil mixing Brakes: high-pitch squeal on light braking (pads/rotors/calipers) Steering/suspension/tyres: play, wear, bearings, tyre condition Rust & water ingress: roof gutters/seams, holes/soft metal, likely leak points

I am providing the brake discs, pads and brake fluid, all ready to go - looking to get all 4 changed and a system flush. The car is parked on the street on a flat surface.

would need someone to put together the timing belt and water pump on my 2010 ford focus xr5 turbo, i can come to you.

I have bought new wheel bearing assemblies to go in my mustang but I can't undo 1 axle retaining nut, don't have the tools, I have all parts here ready to go so simple job for someone with right equipment

I have a 2008 Falcon EA-FG wagon with 300k on the clock that is not starting. Yesterday I went to start the car and it started making by metallic grinding/banging noise on my second or third time attempt and so stopped and called the RACV. The RACV guy says that it is either: a) The starter motor which can easily be replaced. b) The bendix or ring gear which is a bigger job. I need a mobile mechanic to come out and give me a second opinion. The task is to come and quickly pull out the starter motor and tell me what the actual issue is. If it's just the starter motor then there will be another task to replace it. If it's the bendix or ring gear then another task to fix this is you can. This is a friends car so I will need something in writing like an email or Air Tasker message to conform what's wrong. Just to confirm the task price is to come and quickly pull out the starter motor and tell me what the actual issue is. Thanks

My ford falcon g6e ecoboost has some issues with shaft

Drivers window isn’t working in my 2016 ford ranger, the other 3 are working fine.

Hi all I'm needing an experienced person to change over my front and back brake pads on my 2013 Ford Mondeo Wagon. I have the pads already and I'm not sure if all are needing to be replaced there's a squeek noise when braking. None of the pads have sensors. I have a carport or I could come to you if you're not too far from me in Lutwyche.

Seeking a Pre-purchase Vehicle Inspection for a 2020 Kia Sportage - Seaford.

Car saying oil need change so looking for someone to assist

I need my car jump started, I don’t have himp cables

Hi, I need help installing a front and rear dashcam with a hardwire kit (I have the kit and fuse cables) in my Ford Everest Trend (2019). Cable management is important - would like them hidden. Flexible schedule; please share your availability and quote. Thanks!

I will provide starter motor just need someone to fit it . only a thirty minute to sixty minute job .