Find a local Tasker to inspect your Ford in Melbourne Eastern Suburbs

Need to fix the scratch, this is ford Everest

Replace my car’s ac fan belt As it makes a squeeky sound Parts not included

2019 Ford Ranger with SYNC 3. The main USB-A data port used for wired Apple CarPlay has developed an intermittent connection. Symptoms: * Charging works normally. * Apple CarPlay/data connection is intermittent. * The USB plug needs to be lifted/pushed upward inside the socket for CarPlay to connect. * The adjacent USB port is charging-only and works normally. * The fault appears to be the USB data port/media hub. I am looking for an experienced auto electrician or automotive infotainment specialist, preferably with Ford SYNC 3 experience, to supply and install the correct replacement USB media hub/port. Scope to include: * confirm the fault; * supply the correct replacement part/module; * remove and reinstall the necessary console/dashboard trim; * replace the faulty USB media hub/port; and * test and demonstrate fully working wired Apple CarPlay and USB data connection after installation. I am also open to upgrading the existing USB-A data port to USB-C, provided the replacement is fully compatible with Ford SYNC 3 and wired Apple CarPlay, not a charging-only USB-C socket. Please provide a lump-sum supply-and-install quote, and advise: * whether the proposed part is OEM or aftermarket; * whether you recommend USB-A or USB-C; and * the part/module you propose to use, where possible. Vehicle: 2019 Ford Ranger Prefer someone experienced with Ford SYNC 3, Apple CarPlay, USB media hubs, head units or automotive infotainment systems.

Existing spot lights from previous owner weren’t installed correctly. Wanting to have them inspected & working properly with the high beams & All cable tidied up in engine bay. All the wires are run into the correct spots (I believe) so hopefully not a long job.

I need someone to install a pair of driving spotlights and 3 grille marker lights on my Ford Ranger. I already have all the lights, wiring harness, brackets and accessories. An installation guide is also provided. The job includes mounting the lights, routing the wiring neatly, connecting everything correctly. Please bring your own tools and experience with 12V automotive wiring is preferred.

Install 2 Child Seats into Ford Ranger, both forward facing.

Need front and rear weather shields installed on Ford Ranger Sport 2025. I tried myself the first time and stuffed up 🤣 - need semi-professional. They are adhesive/stick on. I don’t have any primer - would be great if you had some to help adhesion. Let me know if you’re interested. Cheers :)

Gloss Black vinyl wrap on both side mirrors of my Ford Ranger.

Hello :) my tire popped, if you have a ford fiesta wheel (4x108) lying around or you’re willing to give up your spare please message 🙏🏻

Have a fault keep getting dcs fault light and check engine, I have reset the ecu to clear the lights but it keeps coming back

I need the GKU dashcam front and rear to be installed in my Ford Everest 2025 model. Dashcam - https://amzn.asia/d/0iLWqUk9

Remove the old bar, Install Ford Ranger Roof Rails+ Sports bar. Should probably take 5-10 hours.

I need someone who is very experienced with servicing Ford's and know all the known issues especially with a heavily modified vehicle. I need the person for approximate 1.5 hrs and need a detailed report and a thorough inspection. This needs to be done during the day tomorrow.

Have Mountain Top cross bars (new in box with instructions - apparently YouTube is easier) that need to be installed on my Ford Ranger. I am time poor but it does appear straightforward for those that are good at these things. Instruction here to help with context: https://www.mountaintop.dk/ShopifyMedia/ProductManuals/892%20151.pdf

There are a few rust spots and panel damage on the left rocker panel and wheel arch as per photographs which need to be repaired so I can get the car roadworthy and registered. Although I have some equipment (or can purchase it) I don't have the capacity to complete the tasks required. Please email for more photos if needed.

I would like an Anderson plug to be installed under the existing trailer wiring harness. I'm happy to organise the following: - 50A anderson plug - Cable (somewhere between 6-10 AWG - keen for your recommendations) - Trailer Vision 175A Black Exterior Connector Cover Assembly - 200A Subfuse (likely something like this - keen for your thoughts) https://www.altronics.com.au/p/s4343-200a-12vdc-high-current-spst-automotive-relay/ Please quote for your labour to complete the install of the following: - Anderson plug housing as indicated in the photos - Cable to vehicle alternator - Provided isolator - Fuse Please let me know if there is anything I have missed. I've attached an image of the current trailer wiring harness and an installed one from another vehicle to show what I'd expect it to look like once installed.

Was driving home from work and car went into limp mode, managed to get it home check engine light is now on I would need the car diagnosed and then fixed :) I’ve now added codes below

Brake lights wouldn’t turn off and now feed has melted & horn stopped working

The power steering hose has a hole, it needs to be replaced Car is a 2011 ford falcon Ute FG ECOLPI 2CI2BJ

Need a reverse camera installed on a 2013 Ford Kuga Trend. Car has a generic aftermarket android head unit which is RCA compatible. Everything is ready, i just need it properly installed. I have the camera kit in hand (NATIKA WD-011) Offering $120, willing to pay extra for a neat and tidy job. I can come to you.