Find a local Tasker to inspect your Peugeot near you

Vehicle: Peugeot 208 GTI 2 door hatch back. Fit front lip (3piece), side mirror caps (caps only,sits over factory mirror casing) & swap out side mirror indicators. Double sided tape & screws supplied for lip and mirror caps.

Hi, I need an automotive technician or mobile mechanic with specific European diagnostic software (Diagbox / Lexia / Peugeot Planet) to come and telecode a replacement steering column switch (stalk unit) on my 2009 Fiat Scudo van (Peugeot platform). My original Delphi COM2005 unit failed. I bought a replacement unit from a donor van with the EXACT SAME part number: 96660130XT. The Problem: After physically installing the replacement part, the van has gone into safety/immobiliser mode. The windshield wipers stay turned on automatically and the engine cranks but won't start due to a transponder/immobiliser key mismatch on the BSI network.

I have bought car seats covers for my Peugeot 4008. I’ve put the covers on, but have no idea how to fasten them with what was provided. Also, I’m not sure how the covers for the back seats go on. DIY stuff is certainly not a strength of mine!

I need a mobile mechanic or Euro car specialist with an advanced automotive scan tool (e.g., Autel, Launch, or Diagbox) to run a diagnostic check on my Peugeot. * Vehicle: 2015 Peugeot 308 VIN VF3LPHNYHFS154761 * The Issue: LIN wire/ECU error or alternator. Can shudders under load * What I need: Plug into the OBD2 port, read all manufacturer-specific fault codes, explain the issue to me, provide the code numbers, and clear the faults to see if they return.

Engine stopped while I was riding and won't restart

lights , central locking, wipers,

Help! My 5008 7seaters 3rd row seat, the discs/wheels off the rails/ sliding track..... How to quick fix? Thx

Auto electrician to come and diagnose 306 1997. Peugeot has the car is in protection mode with stoplight on dash and battery light not allowing the vehicle to start, no spark

Change front brakes for Mazda 3 2015 and Peugeot 308 2015

The Job: I need a savvy hand to install a Vantrue N4 Pro 3-Channel dashcam in my 2009 Peugeot 308 HDi hatchback. I have the unit and cables ready. I’m looking for a "stealth" install—meaning wires tucked neatly behind the trim/headliner so it looks clean and factory-spec. What needs doing: Front & Cabin unit: Mounted to the windshield. Rear Camera: Cable routed through the interior trim to the rear hatch (ideally through the rubber grommet so no wires are hanging loose when the boot is open). Power: Standard 12V cigarette lighter plug-in (no hardwiring required). About You: You’ve got experience with dashcam installs or basic car electrics/trim removal. You have your own plastic pry tools to ensure the trim stays scratch-free. You're efficient! This should be a smooth 60–75 minute job for someone who knows the drill. Location/Timing: I’m flexible on the day/time—let me know what works for you!

Peugeot 306 n5 1. Replace starter motor 2. Install dash cam 3. Install reverse camera

2013 peugeot 208 gti manual front rattles on bumps probably shocks or bushes. Need a quote on yhe fix pls

1. front lower control arm bushes are split in both sides 2.front brake (rotors and pads) replacement

Hi, I need help removing a stripped engine oil drain plug on my Peugeot 308 (2010 model). • The drain plug uses an 8mm Allen key, but it is now completely rounded/slipped • I tried using a 7mm Allen key, but it does not grip • The outer surface is also rounded, so no grip for spanner • The bolt is tight and cannot be removed I already have a new drain plug ready. I just need help to: • Remove the damaged/stripped plug safely • Replace it with the new one 📍 Location: Carindale, Brisbane 🏠 Job can be done at my place, or I can come to you. Thanks!!

Timing chain requires replacement in 2010 Peugeot 308 need supply and fit

Its no sound on music system but other sounds like honk , beeps on sensors is working only radio and bt does not came sound at all.

The car has a melted/burnt wiring connector (pins 5 & 6) causing an electrical fault. I have already purchased the replacement connector (pigtail harness). The job is to cut off the old damaged plug and properly splice the new connector onto the existing wiring (crimp/solder and heat shrink). Access is already available. Looking for someone experienced with automotive wiring

Peugeot 307 2006 air conditioner needs re gas

Suspected slow puncture in rear tyre of Peugeot Django 150 scooter. In need of mobile tyre mechanic to check and replace.

Yesterday the engine light came up and the fan didn't turned off until around 5 minutes after turning the car off. I drove the car into an autocare to scan it and it showed up a few errors that apparently didn't make sense and the mechanic couldn't figure out what was going on. He turned the light off and stayed off until I got home, then when I got to work this morning it happened the same again. Took the car to the same autocare, scanned it again and it showed the same errors. He wrote a list of those and gave it to me to check somewhere else. I need a mechanic that have worked with Peugeot cars before to see what's happening and fix it as its systems are a bit tricky. Pay to be discussed.