Find skilled builders in West Melbourne

Hi - I need my metal pergola taken down and removed. Bolts can be removed or it can be grinded off not fussed - just want it removed. Please quote removal - figure most metal scrapyards will pay for it / take it for free

Install pergola and curtains on side

Need help fixing the corner of a ceiling

Installation of Absco Space Saver Garden Shed 2.26mW x 1.52mD x 2.08mH. Box has been opened and some parts laid out; however, all parts are grouped together as they were delivered. Need someone who is experienced in shed building / installation to put together and install onto existing concrete in area pictured. Shed kit already includes concrete fixings.

Needing someone qualified to assemble 3x3 shed and the brand is easy shed

Need someone to install this shed in my backyard on concrete floor https://www.bunnings.com.au/absco-sheds-3-0-x-1-52-x-2-08m-woodland-grey-space-saver-double-door-garden-shed_p0079542

I’m looking for quotations to supply and install a sun block and/or rain block for my existing pergola (see attached photos). 1. Scope: 1.1 Size = 2 m x 5 m (length) 1.2 Pergola already installed 1.3 Open to options: shade cloth, retractable canopy, roller blinds, or rain protection solutions 1.4 Looking for a practical, cost-effective solution 2. Details: 2.1 Location: Point Cook, VIC 3030 2.2 Timing: Flexible 2.3 Budget: Cost-conscious, open to recommendations 3. Please message with: 3.1 Suggested solution(s) 3.2 Approximate cost range 3.3 Availability Photos or examples of similar work (if available). Thank you.

Assemble Easyshed 2.25 x .78m shed Only needs to be put together, I can attach to the slab

Looking for good Demolition labourer . Removing tiles .

I would like to help you again - View all the details of this offer: https://www.airtasker.com/offers/01KCJNJ7FWMANW7H35HX4HQKQM

Need new shed assembled before event tonorrow. Would do myself but do t have time

Need a EasyShed 6mx3m shed installed on concrete slab

“I already have the shed; I just need it assembled.”

Replace or fix two LED Lights in pergola area

Pitched pergola requires 8 frosted plastic sheets of laser light replaced and othe. One side has been cleaned. Handyman will need to provide material - roofing screws and matching new sheets. You will need your own ladder and safety equipment and required to dispose of the old sheets.

I need someone to paint the driveway. Driveway has already been painted but it has few patches. All driveway to be painted and paint supplied by you.

I'm after someone e to install an Easy Shed garden shed 3000 mm* 2100 mm* 1800 mm on a paver surface as shown in photos. Please provide me a quote for the same.

I need an experienced Tasker to fully clean, sand, and paint a standard-sized timber pergola to transform it with a fresh white finish. The pergola is currently painted white already and measures approximately 10m x 6m. The Tasker must provide: • Proven exterior painting and timber preparation experience. • Their own necessary tools (sanders, brushes, drop sheets, etc.). • High-quality workmanship for a professional finish. Scope of Work 1. Preparation & Cleaning: • Thoroughly clean the entire timber structure to remove dirt, mildew, and any loose coating. • Protect surrounding areas (patio, plants) with drop sheets and tape. 2. Sanding: • Lightly sand all timber surfaces to ensure excellent adhesion for the new paint. • Clean off all sanding dust. 3. Painting (Dulux Natural White): • Apply two coats of a suitable, high-quality, weather-resistant white exterior paint. • Allow adequate drying time between coats. 4. Clean Up: • Remove all debris and materials, leaving the work area spotless. Materials Please Note: I will supply the white exterior paint. The Tasker is expected to supply all prep materials (cleaners, sandpaper, tape) and tools. Please provide your total fixed price for the labour, and briefly outline your relevant experience.

Hi! I have an aluminium pergola that’s slightly drooping in the middle because one of the extra support posts wasn’t installed initially. This is causing water to collect in the gutter above. I already have the extra powder-coated post cut to the correct measurement, along with the deck anchor. I just need someone experienced to: • Install the extra post in the middle section, and • Check that the gutter drains properly afterward (no water pooling). Should be a quick job for someone handy with pergola or deck work. Thanks!

I have an unfinished shed (approx. 6m long x 2.2m wide) that needs to be completed. The structure has been partially assembled, but the remaining work requires someone with experience in shed installation, handyman.