Find a professional pergola installation expert in NSW

Supply & Installation flyover insulated panels • Pergola Size:3.7mx4m • Roofing: Insulated panel roofing • Gutters & 2 Downpipes as required connect to storm water • Lighting: [4 downlights] (supplied and installed) • Fan (we will supply) Please send quotes

I want to do decking and pergola for my home

Install a 3x4m PERGOLUX pergola over a spa. 4 footings are needed

Some sort of putty was used to fill some holes in the pergola timber beams. After some time and heat they are leaking. Need to stop or remove the putty.

We want to build a shaded pergola over the tiled area pictured. The area we'd like covered is approx 5.8m x 2.1m. Looking for something simple with polycarbonate roofing to allow sunlight into the living room. Flexible budget, please quote and we can dicuss.

Pergola repair : Drill back ( bolt in ) pergola roof into brickwork . Removal of temporary acro pops ( leave it on site ).

I’d like to have a pergola for a dining table that stays there all the time, enclosed with glass on all sides.

Build a pergola of 4 beams between two existing structures. Span approximately 3m. Assist with sourcing appropriate reclaimed timber beams and workshop with me how to attach the beams to the buildings

1. Cut existing concrete slab/ tiles 2. Dig and install high strength concrete footing for 2 pergola posts: 1000Wx1000Lx900D 3. Concrete supplied

Pergola needs Colourbond flashing installed, Flashing already purchased and marked up Access: no access to neighbour property, must be installed from on top of pergola (pergola roof mix of colourbond corregated & skylight corrugation) all sections marked cut/fit required on one 1.5m section near lobby Need to supply monument colour tech screws

I would like to build a timber rectangle pergola 5m long 3m wide Posts will be bolted to the concrete slab

Have a pergola about 12m long. Need 3 - 4 batten lights connected to middle pergola beam. Also need 1 or 2 flood lights connected against pergola to face yard. Have an existing hard wire with some length about 5 metres as a start. May also need to divert a plug point to BBq area counter or against screening post if its possible and meets regulations. Needed by Monday 22nd or latest latest 23rd Tuesday. Thanks.

We have a permanent pergola from Bunnings, I believe it’s a mimosa 3 x3 that needs assembling. Someone started but did barely anything.

Existing pergola roof panels to be removed and new ones added along with supporting timber/battens etc. Needs to be properly installed so its tilted back into the gutter as current ones are leaking. 6m X 3m

I bought a basic pergola kit and I need help putting it together. You will need to be able to drill holes into concrete to secure once built. Please see photo for area to build on Can send image of pergola

40sqm of pressure cleaning the concrete and coating it with a woodland grey colour Pics are attached

Painting deck trimmings Paint must be supplied by painter ASAP $600

Handyman required to drill 8 holes and add hooks to hang a pvc curtain to a pergola end

The wooden piece fell off in the wind. It needs to be reattached. Would suit a carpenter or handyman. (I have more simple carpentry work to show whoever gets the job - more work you can do separately if you want)

Painting ceiling of a small pergola area and finish painting ceiling of the garage. Brushes and paint provided just need someone to paint.