Find a drip irrigation system professional in NSW

The price is only for site inspection. Please provide a roughly quote including labor first then we can go to the site inspection. Looking for an experienced landscaper or handyperson to supply and install a complete drip irrigation system for my front garden beds and hedges. Scope of Work: 1. Tap Assembly: Install a smart tap timer (e.g., Holman WX1 Wi-Fi timer), pressure reducer (150 kPa), and line filter onto the existing outdoor hose tap. 2. Main Line & Sub-lines: Lay 13mm/19mm LDPE poly pipe around the front garden beds, concealing it under existing mulch and securing with ground pegs. 3. Dripline / Micro Drippers: - Lay ~20m-30m of 13mm pressure-compensating drip line along the side hedge/fence beds. - Run micro flex tubing with adjustable spike drippers/stream tricklers to individual feature plants/trees in the garden beds. 4. Testing & Setup: Test for leaks, set appropriate flow rates, ensure no overspray on paved paths/driveway, and connect the smart tap timer to home Wi-Fi/app. Site Details: - Garden Type: Front garden beds, mulch, hedge along fence line, feature shrubs/trees, paved walkway. - Water Source: Outdoor garden tap located nearby. - Photos: Attached.

Looking for a experienced and reliable handyman, gardener, or irrigation contractor to supply and install an automated drip irrigation system for 2 raised garden perimeter beds in Bardia. Estimated Scope of Work: 1. Supply: 1x standard digital tap timer (battery operated) + dual tap splitter 1x pressure reducer / filter • 13mm blank poly pipe (supply run from outdoor tap to beds) 13mm pressure-compensating drip-line (30cm emitter spacing) All necessary barbed fittings (elbows, tees, end plugs), ratchet clips, and soil pegs 2. Installation: Connect manifold to standard outdoor tap. Neatly route supply line along the fence line/bed edge. Lay 2 parallel drip lines across each raised bed, staked down securely into the soil. Pressure-test the system, check emitter flow, and program the timer. Budget / Quote Required: Fixed supply & install price. Photo of beds attached.

I want to install a drip irrigation system for the planters long in the fence in backyard , small portion of side yard and in front yard Type of gardening: Other Size of garden: 50m²-150m² Has green waste bin: Yes

Looking for a handyman or someone experienced with basic garden irrigation to help connect and run drip/sprinkler lines to two wall gardens. Rate & Time: Paying $50/hour. Estimating 3 to 4 hours total ($200 budget). If it takes slightly more or less time, we can adjust accordingly on completion. Scope: Connect irrigation line to outdoor tap (including timer/pressure reducer). Run approx. 20m of standard 13mm/19mm black poly irrigation pipe along the side of the house/fence. Connect branch lines and micro-sprayers/drippers to the two vertical wall gardens. Materials & Support: All poly hose, fittings, punch tools, sprayers, clips, and timers are supplied on-site. I will be on hand to assist throughout (depending on day). When: Flexible on days/times - either today, Tuesday, Friday, Saturday, Sunday or Monday.

Plant clumping bamboo at 0.8m spacing along the fence line. Dig holes, mix compost through the backfill, water in. 2. Run approx. 18 m of 19 mm poly irrigation mainline from the existing outdoor tap beside the back bedroom, around the north end of the deck and south along the planting strip. Buried where the ground allows. 3. Fit the head assembly at the tap — timer, backflow preventer, filter, pressure reducer. 4. Fit a reducing tee at each plant and run a 1 m loop of 13 mm inline dripper line around each clump. 5. Flush and pressure test the line, cap the end, set the timer. 6. Mulch the strip 75 mm deep. All materials supplied by me. Plan attached. Access is straightforward via the side of the house. Half a day for one person, or a few hours for two.

Needing drip irrigation installed to my fruit trees, and established 12 vegetable garden beds. Labour only. Type of gardening: Other Size of garden: 50m²-150m² Has green waste bin: Yes

Need an experienced irrigation installer to install and/or reconnect drip-line irrigation to existing garden beds at a rental property. Please quote labour only on Airtasker and provide a separate estimate for materials. All garden beds and taps are on level ground. Garden beds: Front bed (L-shape): approx. 4m x 4m Side bed: approx. 10m straight run Rear bed (L-shape): approx. 7m x 7m Scope: Front bed already has drip line installed but it is disconnected due to a leaking tap fitting. Reconnect using a better-quality fitting and preferably add a second line for improved coverage. Side bed requires a new drip-line installation. Tap is only about 1m away. Rear bed has an existing line to part of the bed, but I may choose to add a second line for better coverage. Tap is approximately 5m away. There are existing Holman timers/controllers installed. They may just need fresh 9V batteries, but happy to take your advice on whether they are suitable to keep using. Objective: This is a rented investment property, so I want a reliable, fully automatic "set and forget" system. Once installed and programmed, tenants should not need to do anything other than leave the taps turned on. The job sounds longer than it is because I've included plenty of detail. For someone experienced with irrigation systems, it should be very straightforward. Don't quote me but having done it amateur style myself a few times it should take a couple of hours or so.

I’m looking for someone to install a drip irrigation system in a small garden bed. All materials will be supplied — this is a labour-only job. The garden is a ground-level front garden bed running along the front of the house, approximately 4m x 3m. The garden bed is currently covered with white decorative pebbles over weed mat. There is an existing shrub on the left side of the bed that will remain in place. The tap is located at the left edge of the bed at ground level — very close to the planting area (marked with a cross in the image attached). The job will require you to push the stones to one side, fold back the weed mat, help with digging holes for planting new flowers/plants (which I will supply), install the drip irrigation, then relay the weed mat and stones back over. I’dlike to keep the existing weed mat intact where possible. All materials will be supplied. I will supply: - K-Rain Small Garden Bed Irrigation Starter Kit (includes dual outlet timer, 13mm pipe, 4mm tube, emitters, all fittings) - Poly pipe cutter and hole punch tool (if you don’t have one) - Additional pot emitter, as I’d like to take one tubing up to a large 50cm pot. Happy to answer any questions before you offer.

Recently moved into this property which has two in ground drip irrigation systems (one each in front and rear) each attached to taps with a timer. I’m looking for someone familiar with these systems to take a look at it, explain it to me and if necessary undertake any repairs. The previous occupants have left some spare lines, etc… so hopefully it’s just labour

I have an automated drip watering system that runs on a timer twice daily. Over time a number of fittings, drippers and connectors have come loose or failed, meaning some areas are flooding while others aren’t getting water at all. I need someone to assess the full system, repair or replace faulty components, and leave it running correctly. The work involves: • Walking the system to identify all failed or leaking fittings • Reseating, repairing or replacing detached drippers, joiners and tubing as needed • Checking and testing the timer mechanism is cycling correctly • Supplying all necessary parts (drippers, barbed fittings, poly tube, end caps etc — standard irrigation parts available at Bunnings) • Running a full test cycle before finishing to confirm even water distribution Please factor the cost of parts into your quote.

Set up GARDENA Micro Irrigation Balcony Set (15 plants) on balcony

Corner joining of pipes are coming loose

Check and repair (if needed) current drip irrigation system in our courtyard garden in the house we have just moved into. Two new timing systems need to be installed on the two taps. Perhaps a new washer on one of the taps too, where there seems to be a leak. Install new garden hose.

I need someone to setup drip irrigation on my backyard and front yard. I have the black pipes installed , just need to make sure it releases water to water the plants

I need drip irrigation system to be installed in my backyard garden bed.

Clear a tangled mat of weeds and a couple of small shrub stumps in retaining wall area approx 7mx2m. Trim and clear vines climbing on fence. Help connect and lay drip irrigation lines 4x7m. Remove vegetation from rear courtyard through house to street on tarps and dispose at local tip. Needs to be complete by lunchtime Tuesday.

Locate leak in irrigation pipe in 2 garden beds of approx 10m long each (same system in both beds). Currently a pipe tube with drip holes. Pipe may need to re replaced in part or whole, The Rate is for the first hour with $50 per hour thereafter if required.

I need some touchups to my landscape -irrigation system to be installed that uses timer to be installed - garden bed to be provided at the boundaries of the landscape. - I will reimburse cost of the materials. I want the landscaper to bring all the essential tools.

i have a leak in my in ground drip irrigation system in my lawn. I've tried to find the soaked spot without success, but I can see where the excess runoff is falling over a rock wall. Because the lawn slopes this doesnt really help find the leak.. A well experienced person is required. - Due date: Flexible

Planning to install a drip irrigation system in a small backyard. Images attached. Dirt patch is around 4m x 0.5m - Due date: Before Sunday, 26 March 2023