Find a professional pergola installation expert in Inner South Melbourne

A laser light or similar roof to be placed on an existing pergola. Roughly 10m x 3m. Gable roof in the centre and flat either side see photos

Looking for an experienced and reliable tradesperson to install a 3m x 4m pergola (already purchased from cosy deals...refer to image for model details) on an existing paved area. The pavers sit on a 100mm concrete slab.

Current polycarbonate roof was replaced in 2020. This wasn’t fitted correctly & may also have holes around the attachment areas. The parameter and few other nailed areas have significantly leaked since, which fast tracked the deterioration to the lattice attached between the roof and the fence, also the fence and some of the support beams. It has also weakened & stripped back some of the paving paint, due to the rain pouring in. This level of leakage and rapid damage never occurred prior to this re-fit and was only required because previous original laser light (approx 30yrs/old) got hail damage. Please refer to photos & look forward to hearing from a highly qualified pergola roofer & more & a suitable time to inspect & quote the scope of repairs required & overall damages Task price is for introduction only, please state amount upon inspection & strictly free quotes only Thanks

We have an outdoor dinning area with a pergola built above it. We’d like a sloping clear polycarbonate roof built above it to keep the area and bbq dry. Is roughly 5x2.5m dimensions, can be flexible as doesn’t need to cover whole existing roof exactly. Would need a gutter on the outer edge to collect water, hopefully to drain into a storage barrel for use on the side. Needs timber framing as existing pergola is flat, and polycarbonate panels fixing on. Someone with experience of doing this or similar essential please. Happy to arrange viewing and discuss price. Rough ideas appreciated first. Thank you.

I have recently removed several slats from my pergola to let more sunlight into the house, and I now need someone with the necessary skill set to remove the three inner support beams that are tied into the house, as well as extending the cross bracing from the other half to tie into the outer support whilst ensuring the structural integrity of the pergola. The price will include the supply and installation, as well as removal of any timber. My terminology may be incorrect and I am also unsure with there would structural integrity concerns in undertaking this, so please ask any questions for further clarity.

I am looking Fwd to build 2 merbau deck 1. 6M X 3.8M 2. 2.8M X 2.8 M

I got pergola extended and need a roof plumber to install (either existing or new) gutter connect it to storm. Also need flashing on both sides. I have gutter and down pipe from the old pergola which is the same size.

Supply & install polycarbonate sheet (transparent) as a roof on an existing pergola, 5.4 x 1.6 m (as pictured). You shall supply all materials and necessary tools. Please specify which sheet to be used and briefly explain your installation method.

Put up fairy lights in rear yard pergola

need a base or floor for a pergola

Pergola installation Aluminium kit. With 4 zip blinds.. 5m X 3.8m In a pool area. All parts are adjacent to the installation area. But need to be brought into the pool fenced area. Might required the porcelain pavers to be cut out at the feet of the pergola, or bolted through the porcelain with appropriate drill/core drill. Gm-outdoor dot com will show you the product. It's a gumei 220 series.

Put up covering plus guttering , I have posted 2 photos showing my area plus 2 photos of what my neighbours have had done as that’s what I’d like to be done.

Pergola installation Aluminium kit. With 4 zip blinds..

I need all three panels on this pergola done in white, patch work has been completed. Material is aluminium

We have a deck that is partially covered by roofline in a townhouse, need the remainder of the deck covered. Approx 2m to fence line and 5.5-6m in length. There is a retaining wall with steel brackets that could be used to secure the posts on fence line.

Laser light on top of pergola is damaged and needs to be removed . Pergola is approx 5metres x 4 metres .

Sand down existing wooden pergola; repair 20 year old features. Repaint with base layer, etc; Reattach facia properly. NOTE: All paint and materials provided by carpenter ( ie. Included in the quote!)

need to build and install aluminium frame pergola with polycarbonate roof EzGlaze, SunGlaze 2.5 x 6.4

We ordered 6 motorised outdoor blinds for our pergola through Blinds Online. Three blinds are already installed, except for the side channels. The remaining three blinds are slightly too wide because our pergola isn’t perfectly square. Unfortunately we didn’t measure the top width…. Out by approx 20mm • Assess the best way to fit the remaining blinds • Potentially shave or trim the pergola posts slightly to allow the blinds to fit • Install the blinds and side channels • No electrical work is required

Looking for an experienced roof plumber to inspect a pergola / shed roof and see if they can locate where the leak is coming from.. Determine if the the roof needs new sheets or can be sealed ..