Find a professional pergola installation expert in Melbourne

Looking for someone to help high-pressure hose and oil pergola as no longer have time to complete myself and needs to be done today. All required equipment will be supplied. Pergola is 3x4m

The roof is 3m x 3m. We have the corrugated tinted Suntuf roofing sheets, 3m x 86cm and the appropriate screws. The back yard has rear lane-way access. We have a suitable ladder. We will remove the sun-cloth and lights before you arrive.

Need clear roof sheets for this pergola in alphington 5000x3750 sheets running down 3750 way Supply + install No gutter is needed Roof battens will be up ready to go

Hi we have a tv mounted in outdoor pergola and we need to somehow waterproof it to prevent water getting into the tv

Description: Water is leaking heavily through our low-pitch terracotta tile verandah/pergola roof. The overall roof area is compact, roughly 5m wide by 1.8m deep. The main issue is in the back-left corner (as pictured), where the flashing has lifted/perished and tiles have shifted or are missing beneath a PVC downpipe elbow, leaving an open void where water enters directly. Scope of work: - Inspect the leak area and the rest of the 5m x 1.8m roof section. - Supply and install appropriate flashing (lead/apron/soaker) properly integrated with the brickwork and downpipe exit. - Re-seat and replace any missing, cracked, or displaced terracotta tiles (i have 4-5 spares) - Check surrounding joins and ensure the penetration is completely watertight. - Tidy up and remove any job debris. Requirements: -Experienced roof plumber or licensed roofer - Must bring own ladder, tools, and required materials (flashing, sealants, replacement terracotta tiles if needed).

Pergola slat on roof partially rotten due to gutter blockage. If it possible to cut it off and replace partially.

Install polycarbonate sheets to existing pergola 4.8x6.2m, 780mm between rafters. I can source sheets if required (planning on clear EZ Glaze). Requires addition of a slope as currently flat. There is a 1m balcony that is 16cm above the pergola. Looking for professional installers only.

Hello, this is task of pergola

Replace current structure with pergola kit and all materials from Bunnings that I will supply ( https://www.bunnings.com.au/toja-2-44-x-3-66m-grid-wall-mount-pergola-kit-w-shade-sail_p0241845 ). Quote for LABOUR only.

Looking for someone to supply and install some sidewalls on my pergola to keep the heat and sound in during winter. Ideally the walls need to be able to be retractable. Don’t need anything fancy. Open to ideas and suggestions on what to install

Wish to construct a pergola to my home that leads to the side porch - see original photo and the suggested AI photo. Dimensions are 8 metres long by 1.3 metres wide. Ideal to wall mount and then have posts behind white fence Painted in white as well? Thank you

I am looking for someone to help remove and dispose a simple timber 4m x 3m pergola in my backyard. The pergola consists of a main beam (170x35)slotted between brick walls, five secondary members (smaller than 120x35, and no columns.

All plants less than 2 years old. 16 ornamental grapes need retraining pruning on 3.3 m high pergola. 2 crepe myrtle trees require pruning . May also require garden bed rebarking but that’s secondary. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

3x4 m aluminium louver pergola assembly and installation

Registered Builder required to oversee construction of pergola to apartment rooftop garden

Job involves installing 6 small panels (appx 400x350mm) in a timber framed area . Will need to cut quad to fit and seal. All materials supplied so labour only. I can assist to hold panels in place.

Looking for an experienced builder/installer to construct a pergola with a retractable roof system for a café space in Richmond. Scope: - Main pergola approx. 5.75m (W) x 7m (D) - Secondary section approx. 3m x 3m ( fixed) - Structure to include posts, rafters, and wall support - Install a motorised retractable roof (or compatible system) - Experience with systems like Somfy motors preferred Requirements: - Must have prior experience with pergolas/retractable or louvered roofs - Ability to advise on materials and structure - Installation only OR supply + install (open to both options) Notes: - Electrical setup for motor may be required (can be quoted separately) - Site inspection recommended before final quote Please share: - Previous similar work - Rough quote range - Availability Location: Richmond

Could someone please replace this corrugated roof (pergola) with a transparent one instead? To bring more light.

Hi - need someone experienced to clean, lightly sand, stain and seal the following: A. Front porch deck (approx 7m sq). B. Outdoor pergola. C. Small outdoor barrel sauna. I can provide 6 litres of decking oil (natural)but need you to bring all tools and rest of supplies needed. Thanks

Install an Aluminum Louvered Pergola. Size 4 meters wide x 5 meters deep x 2.6 meters high. It is to installed on a 5x5 meter timber deck. The pergola has 4 large posts that need anchored to the timber deck with bugle screws. This is an Outmus Pergola. Please refer the YouTube video about install instructions. This usually takes one day for 2 people. https://youtu.be/tMc1lQE4BtQ?si=m_a9c7PhSA4hcKD9