Find skilled builders in Blacktown

Driveway fenced gate damaged while reversing vehicle need it fixed it’s motored gate slightly bent motor still working

1) The drainage in the driveway needs to be cleaned 2) Install a new steel (preferred) drain, if not possible, then replace the exisiting plastic drainage with a new one 3) Repair the cracks (see pic) and put a new rubber foam (expansion joint filler) in the gaps 4) cement the big cracks and with smooth finish and matching colour

Qould want some one to supply and install remote control gate in the driveway to our house

Hi, I’m looking for an experienced person to install a steel shed that I have already purchased.

want to replace the clear panels for new ones can be either clear or smokey colour there are 3 panels each side so 6 in total to replace dispose of old panels

Need help to assemble brand new shed

Replace or fix rusted gutter of pergola, one length only, 6met approx.

I am looking for an experienced professional to supply (buy materials) and install a pergola at my home. Approximate size: 4.7 m × 2.5 m Location: Inside the home, along a side wall of the house. Purpose: To create a shaded sitting/relaxation area suitable for BBQ and outdoor seating The pergola will be installed against a side wall to provide shade and a comfortable space to sit and relax. Please include: Supply of all required materials Full installation Any recommendations on materials or design (if applicable) Let me know if you need any further information, photos, or site details.

louver pergola electric to install - 3x3m on concrete surface.

Prefer Laserlite 2000 Greca Polycarbonate Roofing sheet. Colour, not certain, probably clear or similar, TBC. Area estimate - two rectangles connected - 4.5m edge is sloping down. Rough measurements 9.8m x 4.5m, and 3.4m x 4.5m. The shade cloth to be removed and not replaced. Including removal of existing polycarbonate roof sheets, and supply and install of new sheets. High UV protection and resistance to larger hailstones is important. The current roof could not resist the latter.

Installation of a stratco metal frontier single car port on a concrete driveway

I need help to assemble new garden shed then to carry it to side of house where it will stay. Similar to one in pic provided.

Looking for an experienced handyman to assemble a brand new EasyShed Narrow Slider Garden Shed. Details: Model: EasyShed Narrow Slider (Flat Roof) Dimensions: 3.00m (w) x 0.78m (d) x 1.95m (h) Surface: To be installed on an existing grass, anchored into the ground and timber fence poles (see the attached image). Location: The Ponds, 2769, NSW Requirements: Must bring your own tools (cordless drill, riveter, etc.) and galvanised screws for timber poles anchoring. Experience with EasyShed or similar steel shed brands (Absco/Stratco) is a must.

The pergola measures approximately 6 m × 5.6 m and has 8 posts.. DA consent has been granted. Will submit the CC once a contractor has been appointed. The current floor are soil + artificial grass. The pergola requires concrete footings. The footing work could be quoted separately. The estimated budget is not included the footings. Please feel free to let me know if you have any questions.

Built a simple front pergola for a double garage driveway

I bought a basic pergola kit and I need help putting it together. You will need to be able to drill holes into concrete to secure once built. Please see photo for area to build on Can send image of pergola

Need to assemble and install the shed in Kings park https://www.bunnings.com.au/absco-sheds-3-00-x-2-26-x-2-00m-monument-premier-double-door-garden-shed_p0123614

I need a skilled concreter or handyman experienced with small patch repairs to fix damaged edges and post bases on my driveway, before a Spray Crete resurfacing job on Wednesday (weather permitting). The repairs must be completed on this Tuesday (weather permitting, weather forecast seems to suggest sunny) so the new resurfacing spray crete can be applied the next day. Scope of Work: 1. Repair damaged sections along the driveway edge and around fence posts (see attached photos). • Fill and rebuild edges where concrete has chipped, broken, or eroded. • Shape edges to match the profile as closely as possible. 2. Material specification: • Use Rapid Set Cement All for patching (available from Blacktown Building Supplies), unless you have a strong reason for an alternative (please explain if so). • Use a suitable bonding agent (e.g., BondCrete) to ensure proper adhesion. • I can provide the Rapid Set Cement All and BondCrete, unless you have your own supply. Quote should exclude these if I buy them. 3. Surface preparation: • Remove loose concrete, dirt, and debris from each repair area. • Apply bonding agent according to manufacturer’s instructions before patching. 4. Finishing: • Smooth and shape the surface to blend with surrounding driveway. • Ensure patch is fully cured, level, and solid before resurfacing crew arrives the next day. Repair Locations: 1. Circular cut-out around gate post – fill and blend to match driveway level. (Photo 1) 2. Broken edge beside gate post – rebuild flush with driveway. (Photo 2) 3. Large corner break near opposite gate post – rebuild missing section to original height and shape. (Photo 6) Notes: • Driveway resurfaced on Wednesday (unless it rains), so timing is critical. • Job completed to a standard that allows resurfacing. • Please bring your own tools for concrete mixing, application, and shaping.

Install a dog door on sliding patio door. I will need someone to inspect the sliding door and source the right product/dimensions from Bunnings. Will add price of product to cost of labour. Offer of $200 is labour only.

Need someone to put a sealant between the pergola to stop the water