Find skilled builders in Blacktown

Install a shed supplied from bunnings.

Hi, I need an experienced handy person or tradesperson to install 10 solar driveway lights along my driveway. I already have the lights and all the mounting screws ready to go. The job requires drilling directly into the concrete driveway to securely anchor the base of each light in a straight line. Scope of work: 1. Measure, mark out, and align 10 lights in a perfectly straight line along the edge of the driveway. 2. Drill into the concrete for each light base using appropriate hammer drill/masonry bits. 3. Securely mount and fasten all 10 lights using the supplied screws/plugs. Ensure all lights are level, secure, and clean upon completion. Requirements: 1. Must bring your own professional tools, including a hammer drill and masonry bits suitable for concrete.

For sunlight to come need pergola sheet to be changed to transparent sheet

Hi, I need a qualified tradesperson, welder, or experienced handyman to repair or replace atleast 3 hollow square steel pergola post that has severely rusted out at the bottom interface with the concrete slab (see attached photo). The metal has fully corroded through.The job will involve:Bringing temporary heavy-duty structural props (e.g., Acrow props) to safely support the pergola roof load while working.Cutting out the rusted bottom section of the steel post back to clean, solid metal.Treating the remaining cut metal with rust preventative/cold galvanizing spray.Installing and securely anchoring a heavy-duty galvanized steel post bracket/stirrup into the concrete slab.Bolting the existing steel post into the new stirrup to restore full structural integrity.(Alternatively, if you assess it and think full post replacement or on-site welding a sleeve is a better option, please let me know in your offer).Please specify in your offer:If you have your own structural props/jacks.Your expected turnaround time.If your offer includes the cost of materials (post bracket, heavy-duty concrete anchors, bolts) or if those will be charged separately. Happy to adjust the budget based on the recommended repair or replacement. Open to quotes

Painting and sealed the driveway

18sqm Deck with a pergola

I have a hedge / row of small trees along my driveway that needs a solid trim. It's currently quite tall (roughly 2.5-3m) and needs a significant reduction - please trim it down to a target height of approximately 1.8m. Treat 1.8m as a MINIMUM height, so please don't cut it any shorter than that. Also needs a tidy-up on the sides, it's overhanging near the bin storage area. Please include removal and disposal of all green waste in your quote. Own tools/equipment required for the height (pole saw / hedge trimmer). Happy to confirm exact scope on site before you start.

I need my garage (with absestos) demolished and approximately 21m2 of concrete cutting to be done. I am building a granny flat on the land. Please provide a fix quote for both jobs including disposal fee. I need a licensed demolisher as I will need the clearance certificate to be given to my granny flat builder.

We have a Seating about 2550mm X 2400mm in our garden. Want to put some poles on the sides and on top. Like pergola byt no roof just wooden poles on top too for trees to climb.

Extending driveway by cementing about 2x7 meter soil area

I purchased an easyshed 2.2mx 1.5m skillion and I managed the assemble all the panels and roof with my tools available. Need help to join the panels and roof to make it a shed. Please refer to the photos. Job shouldn't take more than 1 hrs however it may need 2 people to do it.

Looking for an experienced handyman or roofing contractor to replace the clear roofing sheets on my pergola. Scope of work: Remove and replace 8 clear polycarbonate/plastic roof sheets 2 sheets approximately 5m x 70cm 6 sheets approximately 2.4m x 70cm Replace 1 downpipe (exact measurements will need to be confirmed on site) Clean out the pergola/gutter while carrying out the work

Build 2 Bar stools & take away boxes

Looking for someone to excavate a small amount of additional dirt from our driveway in preparation for some roadbase. We’re looking for someone who can create a neat edge and ensure the ground is level.

Need to remove old colorbond and timber. Need new timber and colorbond. The mud room needs an extension roof to put a screen door.

Just an assembly and anchoring done, already have the anchoring kit and shed parts delivered

Painting woodwork under the pergola area. Corrugated roofing is due to be upgraded so painting the beams does not need to be accurate as paint on the roof does not matter at this stage. Paint will be provided. Last guy was totally unreliable and did not show up multiple times and with no notice. We are looking for someone who can reliably complete this job.

Hi everyone, I need 2x pergolas to be cut back to reduce length by 30cm. 1 has colorbond roof 1 has polycarbonate.

I need help to finish the remaining easy shed build 3x3x2.4M. 1 back, 2 side, 1 roof panel is completed. Not much is left. Remaining- 1 roof, 1 front including door panel, and putting all panels together and making the shed. Timber Shed base is ready. I need this done as soon as possible.

Hi, I’m looking for an experienced person to install a steel shed that I have already purchased.