Find skilled builders in North East Melbourne

Hi i need this bbq pulled apart and the rendered bricks knocked down. There is a skip on site allready

Need quotes to get driveway concrete repaired. we have an existing concrete crossover. One for the concret blocks roughly 1.5 to 2 mtrs by 1 mtr is damaged and needs replaced. A second block is comparatively less damaged and needs repair or may be replaced.

Connect our existing driveway to the curb

Shed purchased from EasyShed is 3mx3.75m on a level area with gravel and sand fitted garden tiles. It has an EasyShed window and 2 roofing components to allow light in. They came as part of the package. Required all parts and shed to be assembled. Easy access to site yet once shed is complete, the rear wall will be against an existing shed so access to this side will be limited. Currently completing base - completion by 7 December and so site will be ready for you to build any between 8 Dec to 22 Dec.

Installation or building a small shed

Installation of a new shed purchased from Easyshed. - Model: 2.25m x 0.78m Narrow Slider Shed - SKU:ENSL-S2308-ZA Please refer to the attached photo for dimensions and installation location.

I need concrete laid and 3×3 shed installed. And the ground area levelled. Its pretty lvl already just needs to be cleaned up

Bore under a 3m driveway for 25mm conduit.

Need Shed ZINC15081SECOK - Absco Sheds 1.52 x 0.78 x 1.95m Zincalume Zinc Single Door Garden Shed With Anchors to be assembled. Assembly video reference - https://youtu.be/pFyqDm3i44Q?si=RIax-a6xKfItgpz2

Shed Assembly Giant garden shed 2.38x1.31m w/metal base

Installing new polycarb sheeting over our rear patio area (including supply of sheeting)

Need to concrete the side. Please give me a quote with and without the removal of the stones and pavers Size 1 metre x 6 metre Located in wollert

I would like an easyshed assembled please. I have all the parts as delivered by easyshed. It’s 3 x 3.75 and 2.1 high. Anytime before by Friday would be great. Cheers

Looking for someone to remove existing surface and pour concrete over: Main driveway (from garage to footpath) Front footpath section Side area next to driveway (currently gravel and stepping stones) make me an offer

I need a Absco Sheds 3.00mW x 1.52mD x 2.08mH Spacesaver Garden Shed assembled. It will be on garden pavers against a fence. It will need 8 anchors into the pavers

Assembly and installation of shed

Bike shed in a flat pack to be assembled.

I’ve attempted to install a Milkcan clothesline on my sloping concrete driveway, but I’m struggling to get the post level both ways without using packers that end up showing and making it look really bad. I’d rather have someone professional do it so it looks perfect. • Clothesline posts need to be cut down so the final installed height is approx. recommended height is 1,800mm, but I want • Posts must be securely fixed to the concrete using the supplied mounting plates. • Driveway is on a slope, so everything needs to be leveled properly for a neat finish. Alignment to the roller door needs to look square if you look down it. I’ve already drilled 4 holes for the first plate and put a few screws in so it needs to be fiddled with. Additional Note: I’ve already drilled one hole, but it’s 12mm when it should have been 10mm. The end of a bolt has dropped into that hole. You’ll need a strong magnet (which you can bring) to fish it out. After that, the hole will need to be neatly fixed—either gluing a bolt in place or another suitable method. What’s Provided: • Clothesline, mounting plates, bolts, and standard accessories. What You Need to Bring: • Tools for concrete drilling/fixing • Saw/grinder for trimming posts to the right height • Strong magnet for retrieving the bolt • Any adhesive or filler needed to repair the oversized hole Level to make it square and aligned

Assemble Absco Shed (MN23081SK) concrete foundation is ready to go concrete anchorset is supplied just need assembly

Need this garden shed Assembled