Find local bicycle service near you

I have a custom clear protective wrap to install on my mountain bike. Comes with everything to install and pieces are pre cut for each section of the bike frame. Has application spray etc and video instructions etc Just want someone who knows how to install wraps/ graphics/ window stickers etc just to make sure there are no bubbles. The wrap is clear not graphics.

Hoping to get my front brakes bled by someone who’s better at it than me

Need someone to wrap my mountain bike I’ll buy the wrap

Needs clutch cable Service Fuel filter Don't really know much more

Recently purchased a used Norco MTB and would like it to get it serviced. Also, the right brake lever has broken and needs a replacement. Happy to provide more details. Have attached photos of the bike and the broken lever.

The rear brake on my mountain bike pulls all the way to the handlebar and doesn’t fully stop the bike. This has happened once before (about a year ago) and bleeding the brake fixed the issue, so it likely needs air bubbles removed from the brake line. Looking for someone experienced with hydraulic disc brakes and with the equipment to bleed the rear brake and restore proper braking performance.

Hi, bike is in good condition with new-ish chain rings, chain etc, however the lower gears are skipping therefore likely need to be tuned - need a qualified bike mechanic that actively employed/experienced in a bike workshop (no DIY’ers please), thanks

I need the rear tyre put back in my mountain bike . I’m not sure how to do it

- for new inner tube for specialised rockhopper - assess and fix sticky rear wheel

Put electric engine kit on a trek marlin 5 gen 3

Hi there! I need someone experienced with e-bike conversions or bike mechanics to install an Elomex 1000W rear hub eBike conversion kit (52V 20Ah lithium battery) onto my son’s mountain bike. The kit includes the motorised rear wheel, battery, controller, display, and all components — everything is here, brand new and ready to fit. I just need help with the installation and setup, ensuring the system is wired correctly and safely operational. Details: • Bike: standard mountain bike • Kit: Elomex 1000W rear hub with triangle battery pack • Battery bag provided (triangle frame bag) • Located in Helensvale, QLD • Prefer installation to be done onsite (at our home) You’ll need: • Experience fitting e-bike kits or strong bike mechanical knowledge • Basic tools for bike adjustments and wiring • Confidence connecting the motor, controller, and battery safely Flexible with day/time — just want it done neatly and safely! Please include a brief note on your experience with e-bikes or similar projects.

It's been sitting in the weather. I think it's a trek 7 or 8. Happy to negotiate a price.

My rear bearings need replacing

3 mountain bikes -minor service - I think one needs new cables ..

I have an older Norco storm, needs a good service and I believe the shift levers, cables and possibly derailleurs will need replacing. I also have new brakes to be fitted.

Need a good bike mechanic that can change over a set of rims/tyres onto another mountain bike, needs to bring own tools as its got hydraulic disc brakes looking for someone who knows what theyre doing

I would like a service on the Norco. It has been riding ok, but the last time I took it out the gears started clicking ever few rotations. Not changing gears just slightly out or something. For the GT, I would like to replace lines, shifters and convert to disc brakes if possible. Let me know rough pricing and happy for you to supply parts, if you can. Cheers

Spoke adjacentment to mountain bike wheels

Rear hub conversion kit on mountain bike. - L-frame - 29” wheels 1. Mounting the motor hub into the 135mm rear dropouts 2. Mounting a 52V 30Ah triangle soft-case battery inside the triangle frame 3. Mounting the controller under the bottom frame, below the battery 4. Connecting all wiring properly (kit uses XT60 connectors) 5. Installing the throttle and LCD display Location: Springvale, Melbourne Workspace: Indoors

Looking for someone to service my bike and repair the break pads (they sound really loud and are not working properly).

Need some help getting a road bike off the back of my ute

Tried to replace clutch plates, got all the plates in once I put the clutch cover back on the clutch actuator arm wouldn’t grab onto the pull rod, took it all apart to see why and when I put it all together I snapped the head of one of the clutch spring bolts Pretty much need someone to extract the bolt and replace it as well as finish install the clutch kit replace the pilot filter which I have already and add oil in

I want to have the bike running. It’s a Honda CBR 300R. Been sitting in the garage for a while. So I would like someone to come have a look and let me know what needs to be done. I know it got a full service before being parked. Battery might need replacing, but I believe If we start it, it should be fine. I’m hoping whoever takes the job can help me put it back on the road as soon as possible. Bike has a flat tyre at the back. I prefer someone who can fix on site, or at least has towing capacity to take it away and fix it. Thanks

Fit two new tyres on CB1300. And pink slip of able to provide.

Looking to see if someone can help change my motorbike tyres in the next few days or so?

Ladies Avanti Bike Both tyres are flat, and it hasn’t been ridden in a long time just wanting to get it on the road again. Would be good to re-tape the handle bars too

I have bought (online) a Colnago V4 road bike with Shimano Ultegra Di2. It has arrived in the box but needs to be assembled by someone who knows what they are doing - handlebar/headset, seatpost, connect the various Di2 system components, set up disc brakes. Note - need to be a trained bike mechanic to do this type of assembly.

Road bike full service before the Bowral classic and integrated cockpit install (by bike has a Sram Force groupset)

I need a fine-tuned derailleur and a tune-up on my road bike, Trek. I don't want to take it to a physical store because the prices are too high.

I've got 2 used road bikes, need someone experienced to have a look if they need servicing. There's an issue with one bike in that front derailleur is touching big cog, can't adjust it myself, videos don't help. See photos.

A full road bike service Service Report Safety Check Frame Wipe Down All Bolts Tightened & Checked Brakes Tuned Gears Tuned Lubricate Chain & Cables Spoke Tensions Checked Full Drivetrain Degrease & Clean Wheels Trued & Spokes Tensioned Wheel Hubs Check & Adjusted Detail Polish Frame & Wheels Headset Inspected & Adjusted Bottom Bracket Inspected & Adjusted

Replace cables and hoods on giant defy road bike (disc brake but only require shift cable replacement). I have the new cables and hoods.

I got a bit too ambitious taking off components of my bike for a project and now have no idea how to put it back together - chain, derailleur and back wheel all off. Don’t own a car so getting it to a bike shop is difficult. I have all screws I took off (and some reference photos of how it looked before to help guide). I have all the Allen keys needed (I think). Ideally need it done by end of week so I can use the bike to get to work again next week. Looking for someone with an Airtasker proven history of fixing bikes.

My off road bike was put in the trunk of my car. Was perfectly working. Took it out of trunk. now it kees clicking but does not start....

Trek emonda road bike. Requires a general service and check. Rear disc brake pads also need replacing.

Looking to replace the shift cables and hoods and change the bar tape on a mechanical shifting giant defy (internal cable routing). I have the cables, bar tape and hoods.

Installing my specialised bike and cassette onto Wahoo Kickr. I purchased the second hand and want to make sure it’s installed correctly. Must have experience with bikes or done an install previously.

Gears wont change properly

Hi I have a road bike that needs a service, inner tube may be problematic on the back tyre but I can't figure out what the issue may be.

The gears on my old road bike have stopped shifting on the front derailer. These are old Tiagra gear shift but I suspect it is a case of adjusting the tension on the cables.