Find professional window and door services in Castle Hill NSW

To initially consider options; 1. Rehang existing sliding door with new, better track. 2. Convert existing door frame and door to swinging. Convert door to cavity door- with a new door. A carpenter needs to see the job to properly advise. Cavity door would be the most costly- which is why I have put in a high budget.

New dance studio. Need to hang a standard internal door including door handle

We had a wooden coat hanger with hooks hanging on gyprock wall but it came off We have wooden doors with glass panels and would like to remove one of the panels and install a doggy door

I need track and roller replacement on airlite glass sliding door

Hang 3 internal doors tonight I already bought the doors, just need to chisel bits out and hang the doors, also door handle holes

Repair gyprock wall where door handle has gone through it. Needs to be finished to a stage ready for me to paint the wall myself.

Simple task but need someone with previous record of doing this type of work. Door needs sand and repaint. Part of the frame needs to be patched. Hinges need to be changed. I will buy the paint and hinges.

To repair spirals on a single hung bathroom window

Remove a door, plane the bottom side of door, refit the door. The door is wooden (hollow) and has hinges.

The wire of the garage door machine ribbed y accident so it turned to manual and we can’t make it electrical back again

Hi there, We are looking for an experienced handyman to help with a few outdoor tasks at our townhouse located in Castle Hill (NSW 2154). Tasks include: ✅ Install transparent polycarbonate/acrylic roof panels (approx. 3.5mm thick) above an existing metal pergola aluminum frame. Requires safe ladder work and proper alignment – approx. 5.5m x 1m coverage. We got 7M polycarbonate (color clear) in a roll. But you need to prepare screws and silicone sealant (e.g. Selleys) to seal the edges between the panels and the wall to prevent rainwater from leaking through the gaps. Also some drilling required. And most important, roof panel must be installed with a slight downward slope away from the wall (elevate wall side slightly) to allow rainwater to drain naturally. 🔧 Install a frame around aircon outdoor unit – three sides only. Screw the panels onto the wall and floor (basic drilling). Total 3 frames needs to be installed. 🛠️ Assemble an outdoor metal cabinet (1.2mx0.5m), including screwing panels together (may require minor drilling if holes don't align perfectly). All materials provided. You will need to bring your own tools and cordless drill, possibly ladder if needed. Requirements: Prior experience with acrylic/PC sheet installations preferred Own tools (drill, screws, basic ladder) Reliable and punctual Available on a weekday or weekend (flexible) 📍 Location: Castle Hill NSW 💰 Please quote your price (all-inclusive) Photos available upon request. Thank you!

Can not move the sliding door. It is stucked & misaligned. Need someone who has past similar experience with this kind of door.

My outdoor deck is broken and needs repair.

Need to know how I can install temporary wall or door in an outdoor area. If we can find a solution. Happy to further handover the work Pictures attached

Purchase and replace goes on three external doors

Dog has damaged door frame and section likely needs replacing unless it can be repaired

Fix Google Nest Doorbell to exterior building wall (brick)

As per the pics below I need the seals replaced on the shower door and surrounds as the existing seals seem to be allowing water thru and are quite old. Bunnings sells the seals so my fee excl the costs of the seals (which I can settle once u get them ) As per the pic - the door and the frame are 9mm

skirting boards need replacing as absent, door handles & vent replaced, door needs shaved

Hi I purchased a Meross smart wifi garage door opener from Amazon. I need some help installing it. I have a 'Doorhan 1000PRO Black' which I have checked for compatibility and is fine.