Find a local timber flooring profesional in Windsor VIC

I’m looking for an experienced timber flooring professional to restore approximately **35 m² of pre-engineered European oak flooring** in an apartment. The flooring is **Project Oak Pre-Engineered Timber Flooring**, around 6 years old, with a **3 mm European oak surface layer and factory UV-cured finish**. The whole timber floor needs to be refreshed so the finish is consistent throughout. The goal is to restore it **as close as reasonably possible to the original colour and appearance**, preserving the natural wood grain and avoiding unnecessary removal of the timber surface. Current condition: * general wear, light scratches and scuffing * some worn finish * one small deeper scratch requiring local repair/blending * no loose boards, swelling, lifting or water damage Photos are attached. I am open to the appropriate professional restoration method, such as deep cleaning/recoating, light abrasion and recoating, local repair, or light sanding if genuinely required. The manufacturer’s documentation is focused on maintaining the existing finished surface rather than aggressive sanding. **Requirements:** * experience with engineered/pre-finished oak flooring * explain your proposed process before starting * account for the 3 mm oak wear layer * preserve the existing grain, colour and overall appearance * avoid aggressive sanding unless necessary * blend the deeper scratch as well as reasonably possible * use suitable professional products * include labour, materials, equipment, dust control and final clean-up The apartment will be **fully cleared of furniture**. It is on **Level 2 with lift access**. The apartment will be vacant from **11 August to 14 August around midday**, so the work and required drying/curing time must fit within this window. When quoting, please include your proposed method, products/finish, whether sanding is required, expected curing time, and examples of similar engineered timber restoration work.

Sand back pine timber flooring and restain floor to colour indicated in sample photo. House is an old Victorian villa however floorboards are not original (likely mid 1900s). Imperfections / uneven points exist in aspects of the floor. Will require someone experienced doing this kind of work. Work only needs to be done in hallway, living, dining and kitchen (not bedrooms). Refer to floorplan. Note - walls between kitchen/living, and living/dining, have been removed. Floor has been patched with new pine boards.

Timber Floor Colour Matching & Full Floor Polish – Office (80–100m²) Looking for an experienced timber flooring specialist to repair and refinish our office timber floor. Scope of work: A wall has recently been removed, leaving a visible colour difference in the timber flooring where the wall previously stood. Need the exposed section colour-matched and blended with the existing floor. polish the entire office floor area (approximately 80–100m²) to achieve a consistent finish throughout. Requirements: Experience with timber floor sanding, staining and polishing. Ability to match existing timber floor colour and blend repaired areas seamlessly. Supply all necessary equipment and materials.

Polish full apartment floors

Require a couple of pieces of timber flooring to be filled / sanded / potentially stained to match existing as close as possible, please touch base if you're able to do the job, thank you

We require approx 65sqm of timber flooring laid on top of our existing timber flooring

Remove part timber hybrid flooring from kitchen area (area shown in full on photo). Flooring not glued down. Removal is in anticipation of kitchen renovation commencing. Disposal not required. - Due date: Before Sunday, 20 November 2022