A flooring expert installing timber floor panels.
A flooring expert installing timber floor panels.

Find a local timber flooring profesional in Inner South West Sydney

Fill in a short form and get free quotes for professional timber flooring services in Inner South West Sydney

4.2

Great rating - 4.2/5 (11114+ reviews)

Need timber flooring services?

  • Installation
  • Repair
  • Removal
  • Replacement
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated timber flooring contractors near me

Recent Timber Flooring reviews in Inner South West Sydney

Attendtion to details. Nice person to work with, and stands on the client side to get the most cost-efficient plan to get the job done.

Apartment Timber floor Fix and Repair

$250

Great guy. Pleasanr, helpful, honest, reliable, meticulous with his work. If I had more, would put him on every job.

Flooring work - grind and level to timber floor

$400

Jae is great and worth working with

I need timber floor on my new top storey

$100

Very responsible and reliable. Hard working team, James. Thank you 👍

Removing carpet and timber floor

$5

David has been a fantastic help resolving issues with our floating timber floor that was damaged by a water leak as well as the removing of the irreparable floor in the kitchen ready for replacement tiles. His work is of the highest standard and I highly recommend him. He has excellent understanding of flooring and problem solving issues.

Repairs to floating timber flooring. Carpentry skills.

$2,000

Very nice and hardworking person. Extremely helpful and did very good job. My floor looks amazing.

Sanding and staining the 8mx8m timber floor.

$300

What's the average cost of a timber flooring contractor in Inner South West Sydney

$70 - $800

low

$70

median

$280

high

$800

Low, median and high bar chart distribuiton

Average reviews for Timber Flooring Services in Inner South West Sydney

based on 12 reviews

4.75

11
0
0
1
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

18+

Tasks successfully completed

2

Average amount of offers per task

1

 hr

Average time to receive offers

What does a timber floor installation service include?

From installation to repairs and polishing, flooring experts are dedicated to helping you enhance the beauty and functionality of your home. When you book a service on Airtasker, you can expect comprehensive assistance for the following:


Floorboard selection

Are you uncertain which floorboards will best suit your space? Count on your Tasker for expert guidance. Sorting through the plethora of options available can overwhelm you, especially if you're short on time to conduct thorough research. Your Tasker can provide a confident recommendation tailored to your needs.


Area preparation

Before your new floor can be laid, installers must first prepare the area. The underlying floor has to be dry, clean, and stable for the best results. Installers will approach this step depending on the subfloor materials and the type of floorboards. At this stage, all skirting boards, doors, and door frames will also be removed. Finally, timber floorboards will be left to acclimatise as they need to adjust to the room’s temperature and moisture levels to prevent warping and shrinkage. 


Timber flooring installation

The installation begins with your Tasker laying out moisture-proofing and insulation materials, which should help reduce noise and regulate the house’s temperature. Once the insulation is in place, they can start installing the new boards. The installation process will vary depending on the material of the boards. Solid timber floors require a substructure, while engineered boards can be laid directly over tiles, concrete or other wooden boards. Installers usually install new boards parallel to the longest length of the room or perpendicular to the front door to get the best visual effect.


Afterwards, they will plan the layout to keep the variations in the timber evenly distributed. They’ll glue or nail your floorboards in place, leaving a small gap around the perimeter for expansion, which they will later cover with skirting boards.


Cutting and shaping

Once the bulk of the floor is laid, the installer will carefully measure, cut and fit smaller board sections around corners, cabinets and doorways. This ensures a seamless finish that perfectly aligns with the overall design.


Timber floor polish and coating

Solid floorboards may need to be sanded to remove any scratches or imperfections and then painted with a high-quality polish to restore their shine. A protective coating will be applied as a final step to seal the wood to make it resistant to wear and tear. It is recommended to have your floors serviced regularly for timber floor polish and coat to maintain their beauty and durability, prolonging their lifespan while keeping them looking new.


Timber flooring repairs and restoration

Over time, wooden floors may sustain damage from various factors such as water spills, furniture scratches and dirt. Minor damage can often be fixed by refinishing the surface with light sanding, a new coat of sealant and polishing. For more extensive structural damage, consult a floor repair specialist to assess and correctly fix the problem.

Recent Timber Flooring tasks in Inner South West Sydney

Repair timber deck

$1,000

Brighton-le-Sands NSW 2216, Australia

22nd Sep 2026

Repair/replace section of timber deck which are rotted due to water damage.

Remove and install timber floor

$300

Kogarah NSW 2217, Australia

20th Sep 2026

Few timer floors are damaged by water. Need to remove and install new timer tiles of same design in brand new apartment. Total affected apartment: Number of timer tiles: 2-4 in each apartment: Tiles size approx 2-3 square feet. Please provide me quote for 1 meter square or 1 sq feet for installation and removal. Also, provide me cost breakdown of: Tiles cost range & labour cost. Need to finish task within a week.

Deck Refinish 15 m² timber deck. Full sand then two coats stain

$500

Riverwood NSW 2210, Australia

4th Sep 2026

Deck Refinish 15 m² timber deck. Full sand then two coats stain

Re-stain timber columns

$250

Blakehurst NSW 2221, Australia

22nd Aug 2026

Probably need a ladder to access the timber columns on balcony which need to be re-stained with Merbau

Perfect job done with mo fuss. Would definitely use Tim again

Build a timber deck

$100

Bass Hill NSW 2197, Australia

21st Aug 2026

I Need a professional carpenter (must be licensed and experienced)to build a deck Foundations for footings and posts already poured and ready to go Rough estimates:- Scope of works - 3Metres (length) x 9 Metres (Width)x 1m height (off the ground) -Allow for 3 posts to support the timber beam supporting roof - preferrably 100 x 100 x 3m posts -Finished with Compressed fibro cement sheets (to allow for tiling) - No staircase required - No Balustrade required Send through offers thanks

Sand and stain Merbau timber privacy fence — materials supplied

$2,200

Arncliffe NSW 2205, Australia

19th Aug 2026

Approx. 27 m long × 2.5 m high (approx. 67.5 m²), one visible side. Scope: • Thoroughly clean and prepare timber • Sand weathered/rough areas and provide an even finish • Apply two coats of supplied exterior Merbau timber stain/oil, following manufacturer instructions • Protect paving, plants, pool glass and adjacent surfaces from dust/stain • Include all labour, drop sheets, masking and cleanup etc Materials and equipment supplied including hand sander, stain and applicator. Please quote based on experience with Merbau/timber screening and advise estimated duration. Photos attached.

Solid and thorough job, easy to deal with, and flexible with the start date..

Timber floor board repairs

$200

Campsie, New South Wales

30th Jul 2026

Repair water damaged timber floor boards in preparation for new kitchen. The area will be covered by vinyl so dont require same timber floor boards. Area is approx 1m x 2.5mtrs

Flooring labour to assist in laying timber floor need some power tool

$280

Bankstown NSW 2200, Australia

21st Jul 2026

Looking for someone with some hand and power tool skills to assist trading laying Timber Flooring for the next 2 to 5 days labouring

Timber decking post needs replacing. Wood rot

$1,000

Bardwell Park NSW 2207, Australia

20th Jul 2026

Timber post has wood rot at the base. Post needs to be replaced.

Timber floor staining and polishing

$60

Brighton-Le-Sands NSW, Australia

30th Jun 2026

(Max budget per sqm) I need to change the colour of the timber flooring so it requires re-staining to a darker colour. Please visit this website to have a look at the current flooring colour (all pictures are latest and relevant) https://www.property.com.au/nsw/brighton-le-sands-2216/francis-ave/80-pid-639492/#mediaGallery The bedrooms currently have carpets put on top of the timber flooring. Those needs to be removed as well.

Great work. Jose was prompt and finished the job on time as advised. He also assisted with minor work around the house for no extra money. Quality of work is good. Recommended for all.

Timber sanding

$565

Revesby Heights NSW 2212, Australia

11th Jun 2026

Floor Sanding & Finishing Required Looking for an experienced floor sander to complete timber floor restoration. Scope of work: • One room has already been sanded and just needs staining/finishing to match the rest of the house. • One bedroom requires full sanding and finishing. • Small section of hallway also requires sanding and finishing. • Existing timber floors throughout. • Finish to closely match adjoining areas of the house. Please provide a quote including labour and materials, and let me know your availability. Photos attached for reference.

Floors laid either hybrid timber flooring and some patch work on wall

$500

Greenacre NSW, Australia

8th Jun 2026

Im in middle of doibg some renos i need a ome plastwr woek some floor laid lots of jobs

Timber floor installation

$50

Riverwood, New South Wales

9th May 2026

Timber is already on site. 30m2 cypress pine t&g, secret nails on new joist.

Finish off timber flooring

$500

Greenacre NSW, Australia

6th May 2026

Need someone to finish this timber flooring in the areas in the photos(including under fridge). Some panels may need to be removed (eg. Where cut on an angle) to allow for a clean finish. I have the flooring panels onsite. The floor that is concrete in photos needs to be levelled with the tiled areas. I have some 9mm boards made from MDF to cater for this. They need to be cut down and fitted before the timber flooring is placed down.

Very fast very good

Timber flooring to be fixed

$500

Kogarah NSW, Australia

5th May 2026

I need the timber to be replaced I don’t mind if the timber isn’t the same as the original

Timber floors sanded

$500

Picnic Point NSW, Australia

1st May 2026

Two rooms timber floors sanded so I can clear them

Remove and replace damaged timber decking that have rotted

$300

Hurstville NSW, Australia

30th Apr 2026

1. Remove and replace a small section of rotted pool decking boards as shown in Photo 1. Require new decking boards and new screws. 2, Realign the loose deck board/plank and repair or replace the screws shown in Photo 2. Materials are not provided. Please include materials in the quote.

Timber floor sand

$1,000

Lugarno NSW, Australia

26th Apr 2026

Around 110sq M 15 steps 3 Bed, a living room space, steps and tiny kitchen space

Timber decking repair/replacement – boards lifting

$300

Milperra, New South Wales

24th Apr 2026

Looking for a carpenter to replace a few sections of my timber decking in backyard. A few boards have popped up and need to be re-secured or replaced. I don’t have spare boards.

Finish off timber flooring

$400

Greenacre NSW, Australia

12th Apr 2026

Need someone that can install timber flooring in the area in the photo (including under fridge). Materials are onsite. Some panels need to be removed as they are cut on an angle (see images). Not looking at putting underlay underneath however, the floor needs to be packed using the MDF boards I have onsite. Probably a days work.