Find a professional staining service in North West Melbourne

This task is to pressure wash and decontaminate a deck installed last year and apply two coats of stain to deck after cleaned and dried. This job will have to be carried out over three days. Day one clean deck Day two first coat Day three second coat Care taken to not coat rock work, brick work or concreting when applying stain Area approximately 50m2 All furniture and loose debris will Be removed prior to start day Stain and cleaner will be supplied

I have the wood stain just need this painted. One or two coats depends how the first comes out. Please ignore my budget as i really dont know what to ask.

Hi, I am looking to get the following heat pump installed replacing my existing gas instantaneous heater. REHP-CO2-315SST-V2 I have attached the existing heater setup. Will need to upgrade the switch. I am looking at out of pocket full installation after rebates at $4500. Please provide your company name and ABN. Location is in Craigieburn. 2 Storey home. Thanks.

Description: I need a welder to permanently attach 2 threaded bulkheads to a large stainless steel pot. The silicon O-rings aren't providing an adequate seal, so I want them welded in place. Details: Material: Stainless steel pot Job: Weld 2 bulkheads (there's already 1 existing bulkhead on the lid - see first photo) Locations: First bulkhead: On the lid (flat surface) - will be the 2nd bulkhead on the lid Second bulkhead: On the side of the pot (curved surface) The pot will have 3 bulkheads total when finished - only 2 need welding. Looking for someone experienced with stainless steel welding who can ensure a clean, watertight seal.

I have a 2400 x 1200 sheet of plywood. I need an area of 2030 x 820 of it sanded and stained and sealed on both sides.it is going to be the back of a bookshelf so it needs to look nice. Sand up to 400 grit, and 6 coats of wipe-on Poly. I will provide the wood, the stain and the wipe on Poly. Sand paper too if you need it. You can take the plywood wood away to work on it in your own space, or use my carport, whichever works better for you.

The top of a wooden dinning table stain black

Need my front door stained. Want it to match the floors

Need front door stained by a professional

Remove power raid stains from carpet an bed mattresses carpet cleaning

Solid timber staircase needing sand and stain to refresh

need the smoke stain small patch on the ceiling

I need a scratch sanded out of 2 floorboards and stained

need help to clean the smoke stains on the ceiling. Its a very small patch

Deck cleaned and stained as well as the surround beams and garden bed planks

Deck sanded and stained including steps. Deck dimensions roughly 7.7m x 7.2m.

We have a large deck that has some old cabots aquadeck on it. It needs to be stripped (open to sanding but our deck builder said stripping would be safer) and restained. We also have two small area of new deck that need washing and staining. See photos. The dimensions are new bare deck (laid two months ago) - 15sqm treated weathered deck - 87 sqm

I need the front and back deck re-staining

Stainless Steel Bird spikes to be installed along the flat top ledge of the brick entry structure above the house number at the front of the house. This is the horizontal surface at the very top of the entrance façade where birds are currently perching, length 5meters.

Need a custom stainless steel bbq hot plate made 440 x 435….to look similar to attached

Sand deck and retain. No replacement of boards required