Hire professional local solar panel installers in NSW

28 Panels. Clean & Clear: Remove any existing pigeon nests, debris, and droppings from underneath the solar panels before installing the mesh. Install Mesh: Install PVC-coated galvanized steel mesh around the outer perimeter of the solar panel array. Side-by-Side Overlap: Mesh sections must be installed side-by-side with a 2-3 square overlap at the joints to ensure there are absolutely no gaps. No Drilling: You must use non-invasive solar panel clips (no drilling into the frames to avoid voiding the warranty). Mould to Roof: The bottom of the mesh needs to be neatly contoured and flush against the roof profile so birds cannot squeeze under.

I need 3 x ring cameras and their solar panels fitted on exterior brickwork of our home. Decent sized ladder required at least 6-8ft to reach spots. No actual electrical work required.

I have 29 solar panels and I need mesh to avoid birds mess

remove 20 solar panels and 5kw inverter, and replace with 29 2nd hand panels (3 yr old Qcells 410w) and goodwe 10kw inverter which was part of original install. seller advises professionally removed. panels will need to be tested before installation. connecting to a 50kw voltx battery/grid. can use current stands for 20 panels but will need to supply stands for remaining 9 panels. roof is colourbond pitched at 5deg south.

I need an handyman to install 4 small solar panels to my four eufy wireless cameras. It's a tall ceiling single storey home, so you will require a full size ladder

I would like to connect 6 new 12v solar panels to my existing 24v solar and battery system

need to move 8 solar panels from the ground to the roof (single storey), and then fix them withbolts (tools and bolts provided), no electrical connection/work needed. Is minimum 2 person job, since the panels are about 25kg each. Ideally 2 fit person. Not afraid of height.

I would like to request a quote for the installation of an off-grid solar power system. The system will be installed on top of a 6 m × 3 m container. We can supply the following system ourselves: * Victron 48/3000 EasySolar GX with 48/3000 Inverter/Charger & 250/70 SmartSolar MPPT * 3 kW solar array consisting of 6 × 500 W solar panels (expandable) * 1 × 5 kWh Vaulta lithium battery module (expandable) * Clenergy racking kit * Victron GX device with Bluetooth dashboard & VRM portal access via Wi-Fi/Ethernet * Balance of system equipment including PV isolator, PV cable, MC4 connectors, cable clips, etc. Reference system: [Eco Cool Off-Grid Basic Kit]https://www.ecocool.com.au/products/packages/offgrid-basic-kit-3kva-5kwh-lithium-battery-3kw-solar/ If you are able to supply a comparable system at a lower price than Eco Cool, please feel free to include a quote for supply as well.

Large roof with solar panels. We have a couple of pigeons driving us crazy. Need pigeon removal and then installation of mesh to pigeon proof, expect quality install and some warranty. Double story brick house, with many solar panels. See Photo, only panels on the brown tiled pitched roof need pigeon proofing. 3 groups of panels.

I need a price on 8 x 475kw solar panels installed tiled roof single story and connected to my battery.

The solar panel inverter is on a wall indoor now. Need to relocate it to the outdoor - can be the same wall and exactly where it is, just on the opposite side of the wall so will be outdoor.

Looking for someone who can check solar panels as it’s not producing

I need a service to a SMA inverter and Fronius inverter and the panels on my roof - commercial warehouse

Re arranging solar panel rails and removing 10 panels then adding 30 panels. 6 rails and fitting needed to complete. I will pay labour + materials

Install items in picture into my Ute canopy. I can move items to make more space. There is already a hole into canopy which is taped over. Need solar mounted to roof (not racks, needs to run between racks )

I need someone to install solar panel mesh on my current solar panels as i have noticed some pigeons. i have 3 array of solar panels on roof. Your task will be to first clean the solar panels and clear the debris then install the solar panel mesh. I can buy the mesh kit if required. Red area has poop build up

MESH & CLIPS PROVIDED (attached) > Looking for an experienced installer to install bird mesh around solar panels on a tiled roof property in Edensor Park. Goal is to prevent birds nesting underneath panels. Details: Double storey house Tiled roof Solar panels already installed Full perimeter mesh installation required Must be properly secured with clips (provided - no damage to panels) Requirements: ✔ Clean area first. ✔ Experience with solar panel bird proofing ✔ Must bring own tools and equipment ✔ Neat, secure installation (no gaps) ✔ Prefer someone who has done this before Please include: Your experience Photos of previous work (if available)

I’m looking for someone to install a small solar power system on my 15ft Franklin caravan. What I need done: 1. Mount my solar panel to the roof of my caravan 2. Run the cabling into the cabin neatly and weatherproof the roof entry point 3. Connect the solar panel to my Kings power pack (portable battery) 4. Install a 12V connection/output so the Kings power pack can power: • Existing 12V caravan lights • A small 12V fridge Details: • 15ft Franklin Caravan with internal 12v lights and 3 way fridge • Solar panel and Kings power pack already purchased • Happy to discuss any additional parts required (cables, connectors, fuse, regulator etc.) • Can negotiate price

Wire battery inverter into small box trailer.

We have a wireless security camera with solar panel (Reolink Argus PT Ultra) that needs to be installed in the front of our 1-storey house. It will need to be installed in the brick or fascia or roof (TBC) so you will need to bring a ladder. Date and time flexible - just need to be before 11AM between 22-26 December 2025.