A close-up view of a pool table with green felt being measured for refelting.
A close-up view of a pool table with green felt being measured for refelting.

Find reliable pool table refelting services in Adelaide

Fill in a short form and get free quotes for a professional pool table refelting service in Adelaide

4.2

Great rating - 4.2/5 (11114+ reviews)

Get help from a local pool table recovering Tasker

  • Pool table recovering
  • Pool table restoration
  • Pool table refinishing
  • Pool table felt repair
  • Pool table felt installation
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Recent Pool Table Refelting tasks in Adelaide

Pool table refelt

$300

Maylands SA, Australia

17th Dec 2023

Supply and install of pooltable cloth and bumper cloth of 6ft slate table. Will need to be glued as table does not have provision for staples on slate. - Due date: Flexible

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Top Pool Table Refelting related questions

Pool table repairs in Adelaide typically fall around $250 to $500, depending on the fault, table size, and parts needed. A simple pocket or levelling job may sit at the lower end, while more involved slate, cushion, or timber repairs can push the quote higher.

If the cloth needs replacing, the pool table refelting cost guide puts the typical range at $285 to $515. A 7-foot table generally falls at $285 to $435, while a 9-foot table can reach $360 to $515.

Sometimes, yes, particularly for smaller fixes like a torn pocket liner or a loose rail. Availability depends on how many Taskers are active in your suburb that day and how much detail you provide upfront. Larger jobs like a full refelt or slate repair usually need a day or two of lead time to source materials.

According to Airtasker’s data, March is one of the better months to book pool table repairs in Adelaide, with lower average prices and quicker Tasker response times, the mild autumn weather helps too.

November can also be a good-value choice, with the lowest median price and relatively quick turnaround. If you have flexibility, avoid February and June for the best rates, and note that December tends to be cheaper but slower for response times.

Tasker density tends to be strongest around Norwood, Unley, and Burnside, where a mix of homes and hospitality venues keeps demand for pool table repairs steady.

Sometimes. Refelting a cheap pool table can be worthwhile if the frame is solid, the playing surface is flat, and worn felt is the main problem. It makes more sense on a sound slate table, where new cloth can improve ball roll and extend the table’s usable life.

For a low-cost MDF or wood-bed table that has warped or developed structural problems, new felt will not fix the underlying issue. Given that pool table refelting typically costs in the range of $285 to $515, compare the repair cost against the table's condition and replacement value before going ahead.

Book your next expert pool table repairs in Adelaide

Adelaide's dry, hot summers and the cooler, damper winters up in the Hills both take a toll on a pool table's felt, timber and slate. A pool table that pulls every straight shot to one side gets frustrating fast. The same goes for torn felt, loose pockets, or a slate bed that's shifted just enough to throw off every shot. Pool table repairs in Adelaide cover exactly this kind of wear, bringing a table back to proper playing condition instead of forcing a full replacement.

Maybe it's a home table that's been rolling short on one side for months, or a torn patch near the top pocket catching the cue ball mid-shot. Whether it's a family room table or one used heavily at a local venue, the fix usually comes down to the same culprits that calls for refelting, rail repairs, or another targeted fix..

Pool table repair tasks are posted regularly across Adelaide, with a local pool of Taskers ready to take them on. Backed by an average 4.2-star rating, you can compare Tasker profiles, read past reviews and pick someone who's handled tables like yours before.

Post your task today to connect with trusted Adelaide pool table repair experts!

What’s included in pool table repairs

A bad roll does not always mean you need a new table. Often, the problem comes down to worn cloth, tired cushions, or a playing surface that needs to be levelled. Explore the pool table repairs you can book:

Repairing torn or worn felt

If the cloth has gone thin around the pockets, picked up tears, or started slowing the ball, patching it may only hide the problem. Your Tasker assesses whether the damage can be repaired or whether a full refelt makes more sense. If replacement is needed, the job may include removing the old cloth, preparing the slate, and fitting new felt.

For a table in a busy Norwood games room or near the Adelaide CBD, this can make an older table feel noticeably fresher without replacing the whole setup.

Levelling slate and stabilising your table

Watching a ball curve towards the same rail every time is a good sign the table needs attention. Moving house, shifting the table across a room, or settling floors can leave the frame or slate slightly out of level.

A Tasker can check the frame and slate bed with a spirit level before making suitable adjustments. This is especially worth doing after relocating a heavy slate table into an Unley home or setting one up in a new games room.

Replacing cushions and repairing rails

When a firm shot hits the cushion and comes back flat, the rubber beneath the rail may be worn or damaged. Loose rails can cause similar problems and make rebounds unpredictable.

A Tasker can inspect the cushion rubber and rail fixings before replacing or securing whatever needs attention. For older pool tables in Adelaide's established eastern suburbs, this can be a practical part of a wider table restoration rather than replacing an otherwise solid table.

Repairing pockets and table hardware

Loose pockets, torn nets, and worn fittings can make an otherwise good table feel tired and awkward to use. A Tasker can repair or replace damaged pockets and tighten loose hardware so everything sits properly again.

For older pool tables around Parkside and nearby suburbs, this type of pool table repair can also help prevent small faults from putting extra strain on the frame. Your Tasker may be able to address several fittings during the same booking, depending on the parts required.

Restoring slate beds and timber frames

A cracked, shifted, or uneven slate bed can affect every shot, while loose joints or damaged timber can make the whole table feel unstable. These problems are common after years of use or moving a heavy table between properties.

A Tasker can inspect the frame for movement and level the playing surface, repairing timber components where needed. Older pool tables in areas such as Stirling may also need frame restoration before new cloth is fitted, helping create a more solid base for accurate play.

Why choose pool table repair Taskers in Adelaide?

Pool tables across the city range from modern home games-room setups to older pool tables that have been moved, stored, or played on for years. Local Taskers may also be familiar with the access issues that come with moving heavy slate tables through Adelaide homes.

Most pool table technicians in Adelaide have local expertise

Pool table repairs can sometimes involve more than the table itself, especially when a games room also needs lighting changes or electrical adjustments. A local Adelaide Tasker can recognise when that part of the job needs to be handled by a registered electrician, while keeping the pool table repair, refelting, or levelling work moving. If fixed wiring is involved, you can check the relevant requirements through SA’s electrical licensing guidance.

Heavy slate brings its own challenges. Moving or resetting a slate pool table through stairs, narrow doorways, or sloping access around Adelaide Central and the Hills takes careful handling. Experienced Taskers can plan around the table's weight and access constraints before dismantling or repositioning it. SafeWork SA’s manual handling guidance also recommends extra care with heavy and awkward loads.

Most pool table technicians in Adelaide can address unique local challenges

Adelaide's climate — swinging from hot, dry summers to cooler, damper winters — can affect how a pool table ages. In Stirling, cooler and wetter Hills weather can be tougher on tables kept in garages or less insulated rooms, where timber movement or an uneven playing surface may become more noticeable. In Norwood, older homes can bring a different issue, with tighter access making slate pool table repairs and repositioning more difficult.

Taskers familiar with pool table repairs in Adelaide can work around these local conditions and assess what the table actually needs, whether that means correcting the level, repairing worn components, or restoring an older pool table.

Most pool table technicians in Adelaide offer fast turnaround times

When a pool table suddenly develops a fault, waiting can mean putting games, gatherings, or regular use on hold. In suburbs like Unley and Norwood, a local Tasker may be able to step in sooner to sort out issues such as loose pockets, damaged felt, or a table that has slipped out of level. Add your preferred date when posting so you can compare available Taskers.

A table brought out of storage before a gathering may also need a quick assessment. An early inspection can help establish whether it only needs levelling or whether parts need to be sourced. A nearby Tasker can inspect it sooner and get repairs underway.

Most pool table technicians in Adelaide can provide transparent, local pricing

Pool table repair costs in Adelaide can vary widely depending on the table, the damage, and how straightforward the job is. Local Taskers can offer pricing upfront based on your task details, so you have a clearer idea of what’s included before work begins. Sharing photos, table dimensions, and the repair needed can also make it easier to compare quotes fairly.

Pool table repairs in North Adelaide and Norwood may cost more when heavy slate needs to be moved through terraces, townhouses, or apartments, which make up a large share of homes in both suburbs. Tight access can mean more careful handling before repairs or levelling even begin. In Stirling or Aldgate, quotes can also rise when transporting a table or replacement parts farther into the Hills adds travel time, labour, and fuel.

What other related services can I book in Adelaide?

Setting up a pool table from scratch can be a bigger job than it looks, especially once slate alignment and felt fitting come into play. A pool table assembly in Adelaide can handle the setup so the table is level and ready to use. If you’re clearing space, moving house, or replacing an old table, pool table removals can help dismantle and relocate it without adding another heavy job to your list.

If the rest of the room has seen better days, a furniture repair Tasker can take care of scratched timber, loose joints, or worn pieces around the games area. And when the hardest part is simply shifting a heavy pool table or bulky furniture into position, heavy lifting services can provide the extra help needed before repairs or setup begin.