Find professional local plasterers in WA

Renovate a 54 m² shed into a granny flat with walls just under 3 m high and a loft. A 2x2 m bathroom is included. All walls and ceilings throughout the space require plasterboard installation. Framing and steel battens have mostly been installed

Have a few small dents/ chips in some walls that require plaster and paint. I don’t have the time to completed before vacating. Open budget.

Plaster up laundry wall where sink was taken away

Mount new IKEA besta tv cabinet to dry wall and mount TV. The TV is a Samsung 65 inch the Frame. Cabling to be flushed into the wall if possible.

HI, after a quote to repair several internal wall chips and cracks on a house

We would like this hole in the ceiling plastered up.

Gyprock 3 brick walls. There are 5 power points where openings will be required. Please let me know if your price includes materials.

Supply glass panel door. Fit door, frame and gyprock above. Dimensions of entry in passageway 2500 x900. Paint door and gyprock above.

Hello, we need the seams plastered where new gyprock has been installed where the old pantry was. photos of situation and measurements attached. Backing boards and screws will be installed over the weekend. Will need to supply own materials to compete the job.

I need a plasterer to repair a cracked ceiling in the lounge room, about 1000x1000 of plaster will need to be cut out and replaced then troweled and sanded, ready to be repainted

Installing 4 metal peg boards on gyprock and wooden wall.

Hello, We are looking for a skilled handyman, plasterer, or painter to repair a small hole in the ceiling at our retail store, in Midland Gate Shopping Centre. The Issue: A small hole has appeared in our ceiling near the pre-test room. This was previously associated with a water leak during rain. We believe the source of the leak has been addressed by Centre Management; however, we now need the physical hole in the ceiling repaired professionally to prevent any further issues and remove the hazard. Ceiling height: Approximately 4 meters The Job: The task is to patch the hole and repaint the area so it blends seamlessly with the existing ceiling. The scope of work includes: 1. Safely accessing the high ceiling (approx. 4 meters). 2. Preparing the area around the hole, patching it with a suitable filler, and sanding it perfectly smooth and flush. 3. Applying a spot-prime to the repaired area. 4. Painting the patch to match the rest of the ceiling. Paint Specification: We have the exact paint details for a perfect match: - Brand: Dulux - Colour: Berkshire White 73712 - Finish: Satin Requirements: - MUST have experience with high-quality plasterboard repair and interior painting. - You MUST bring your own tall A-frame ladder or appropriate platform to safely work at a height of approximately 4 meters. - You must supply all necessary tools and materials, including plaster filler, sandpaper, and a small quantity of the specified Dulux paint. - Must work cleanly and professionally within a live retail environment. - Public liability insurance is required. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying all necessary materials, including the specified paint. Thank you.

Please supply me with a quote. The towel rail has come out of the wall, leaving damage. I need the wall fixed and the towel rail put back up. It needs to be done between Thursday and Sunday (completed before 6th October)

Repair hole in plasterboard wall Bassendean area Want done so I can paint walls

BUDGET IS JUST A PLACEHOLDER - SEEKING QUOTES I have a small outdoor shed that I’m converting to an office (2x8m long, 1.3m wide, 2.1m high) and am looking for a plasterer to plaster the walls and ceiling for me. I have installed the plasterboards but it’s very much a DIY job with quite a few holes and gaps. I am looking for someone to make the walls ‘paint ready’ with square corners and no visible joins. Would also prefer to pay cash if possible.

I need a set of wooden gymnastics stall bars (already assembled, approx. 2.3m tall) securely installed against a plasterboard wall in my timber-frame house. ⚠️ Important: The stall bars need to be fixed into wall studs (not just plasterboard) so they are strong enough to safely take full bodyweight, including hanging and inverted exercises. Wall is standard plasterboard with timber studs behind. Stud finder and correct fixings will be needed (coach screws/bolts into studs, or battens if studs don’t align with brackets). I need this mounted rock solid and safe for load-bearing use. The unit already has metal brackets top and bottom for fixing into the wall. Please bring your own tools and appropriate heavy-duty fixings. Skills required: Carpentry / handyman experience Confident with stud walls and load-bearing installations Extra Info: Location: North Beach Flexible with day/time. Should be a quick job for someone experienced (likely under 1 hour).

Fix Gyprock ceiling to Living area

We have three walls that need plastering after tiles have been removed along with a few patch ups. Two power points are being relocated and existing holes need filling. We are a bit restricted on days as flooring is being laid 11-14th August restricting access. New cupboards are being fitted in the cavity beside this area on 16th August but there will be one overhead installed that may hinder the plastering after it is installed. There still will be access behind it. Ideally job to be done 8th to 10th of August or 15th of August. Preferably not while the floor is getting laid. Otherwise will have to be after cupboards are installed. Price negotiable.

Cracking along parts of a bulkhead and cornice. Potentially needs replacing or if can be repaired. Have some other areas throughout house for inspection too if possible

Plasterer patch old holes for evap ducting (7) as well as around 8 holes from old down lights. We’d like someone who can do a good job and make the repair look seamless. Apologies for the edit, I didn’t include a picture of the big hole (all the others are just standard duct sizes) please update your quotes if required. We don’t need you to paint.