Find a professional pergola installation expert in QLD

pressure wash, prepare & paint all paintable surfaces, Fence & pergola. 2 Coates wattle solarguard

Pergola with slanted colourbond roof to be supplied and constructed on a concete slab 4.8m x 3.25m

Looking for a qualified painter for a quick outdoor project. The job involves painting the timber/metal structure of a small pergola over a BBQ stand, as well as the exterior sides of the BBQ structure. All paint is already purchased and provided by the owner. Please bring your own brushes, rollers, and drop sheets. Ready for an immediate start.

The junction between our house roof and our pergola roof leaks when it rains. I bogged up a visible junction but it hasn't helped. The roof is tile and the pergola roof is metal.

Assembly and erection of 6x2.5m aluminium pergola. The pergola has an electric louvred roof and shades on all sides. Detailed assembly instructions and a video have been supplied by the manufacturer. No electric work is required, other than simply connecting all necessary quick-fit connectors as necessary.

I have a section of the pergola slacks that need removing. Looks like they are screwed in. Looking for clear pergola sheeting put in place and sealed so the rain can run off. Looking for someone who has some experience in this. Need to supply the clear pergola sheeting. 3.4 metres in length and 1.9m width. All slacks to be taken away and dumped swell.

I’m looking for someone experienced with pergolas, shade sails or outdoor installations to install a waterproof shade cloth onto my existing timber pergola. Materials already supplied: * Waterproof shade cloth (1.8m x 10m) * Coolaroo timber fasteners * Coolaroo tie wraps * 10mm packing shims/spacers Job includes: * Measure and cut the shade cloth to suit. * Create a slight fall for water runoff using the supplied spacers if required. * Secure the shade cloth neatly and tightly to the existing pergola. * Ensure there is no sagging or water pooling. * Keep the installation renter-friendly (no drilling into the house). The Pergola is approximately 3 m deep × 3.5 m wide. Happy for installer to confirm measurements on arrival. I’d like the finished result to look neat and allow rain to run off properly while still looking attractive. Please bring any additional tools you may need (ladder, cutting tools, etc.). Experience installing shade sails, shade cloth or pergola roofing is preferred.

Established deck approx. 3x 4.5m, no longer completely level, but remains stable - about 10cm off ground. Currently a Bunnings modular decking wood base - built about 5 years ago. Also need aluminium pergola assembled to go on top of deck, properly anchored, approx. 3x4m.

I have two jobs 1. Pergola - it is a flat pack kit that needs assembly and fixed to the wall. 2. Put up a small sandwich board roof over an open balconly approx 1 x 3 m - there is a frame already in place, and will need a couple of triangle braces to get the pitch right. Attached pic of pergola and balcony and frames for sandwich board roof. Last pic shows where roof (upper) and pergola (lower) will go.

Sanding one side of a front door then paint it. The other side and door frame are overall complete. There are small areas on the other side of the front door that require a 2nd coat. Laundry door is painted but has a few small patch areas that need a coat. Also painting a 12m x 7cm x 3cm piece of timber on the ground. All paint is supplied.

I have a large 15m x 3M 75mm insulated flyover pergola that needs removing

Cut supplied 2400mm x 1200mm plastic lattice screens to fit between metal pergola posts (posts are 50 mm square) Attach supplied metal frame to pergola posts (will require cutting to fit) Insert lattice into metal frame

I have purchased a pool pergola / pavilion from smart kits Australia, and need it installed. The posts will need to be concreted in at 400- 500mm into ground. There will be a slab poured once it is installed. Kit will come with instructions and I have machinery to dig the holes for the posts.

timber pergola and decking, also solar panels dismantled and removed

Help with the design, supply and installation of a 2.4 x 2.4 paint grade treated pine freestanding timber pergola while my wife is away for business.

One of the poles for the pergola has rusted through needs replacing. See pictures, please give me a quote

I have a bbq king 3x3m pergola with louvre style slatted roof that needs assembling and installing on a timber deck .

Currently in pieces in a box needs to put up

Need to install free standing 4m X 3m Aluminium Pergola Gazebo on top my deck. All boxes are next to the installation area. I also have instruction manual. I just add initial price (100) to post the advertisement. I am open for quote to complete the task.

Pergola kit has been built but the sliding blinds have come out the runners. Need someone experienced with these pergola kits to fix Heres the link for that particular make/model https://leisuregarden.com.au/product/gazebo-kit/?utm_source=google&utm_medium=cpc&utm_campaign=22338005902&utm_term=diy%20pergola&utm_content=177975942684&gad_source=1&gad_campaignid=22338005902&gbraid=0AAAAAocfH1lF5vIuUfcBw7usLmt2rQEXI&gclid=EAIaIQobChMIo7-S7IzMkgMVF9UWBR27-AMsEAAYASAAEgK6n_D_BwE It