Find a professional paving contractor in South Adelaide

Pull up 11m2 of old pavers 300x200x60mm thick Roughly 125 pavers to come up Once you get started you should be done in about 1.5 hours You can break the pavers if need be but bring equipment with you suitable to achieve the task I have very limited tools for this task Pavers are to be stacked on a pallet approx 10 metre walk

Paving of patio and adjoining pathways, flat surface, using 400x400x40cm pavers. Current brick paving to be lifted first. Depending on remaining base, sand may need to be spread aand compacted but assuming the remaining base will be ok. You will be working with one other person to share the load. Estimate 4 full days of work.

Need someone level the pavers which are stick out.

Lay pavers 3 wide down the middle of this area. Pavers are 400x400mm square (like the ones in the photo). Area is 8 meters long and 1850 mm wide. Each paver is separated by 50 mm (same spacing as photos). Area needs to be flattened. Pavers mortared in.

Have a small 8sqm area (5.9m x 1.3m) in our backyard that I need paved. Job to include: - removing existing soil and dispose (good quality garden soil) - replacing with paving sand/base etc - paving of the area that is currently the garden bed with same pavers as currently next to it - I will provide the pavers See photos for more detail.

Finish a job that’s not finished.

The base for our caravan driveway has already been prepared — rubble has been laid and compacted, and bedding sand is on site ready to use. We have the pavers on hand (300 mm × 306 mm, with some cutting required). We are now looking for someone to complete the laying/paving work. Could you please confirm your availability and provide an indication of cost? Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

Path of 1.75X 7.1 to be prepared and supplied pavers laid.

remove existing 400x400x50 pavers, replace with 400x400x40 new pavers. APC Master Paver sand and charcoal. 21square metres, good access.

Need to fix the driveway pavers.

Paving around pool and patio to be lifted and relaid. Will help will removal etc.

Needing to move 50x50cm pavers from our backyard and re-lay them in the front driveway and down the side. Approx 25sqm. I will help with labour and laying. Can provide paver cutting machine if needed. Materials provided. I will lay the lawn in place of the pavers myself afterwards.

Remove 30 square metres of paving around pool and load into trailer supplied by owner. Prefer weekends. But can organise weekdays if not possible.

Replace these pavers end edging (circled in pic) with new pavers and edging. I want it to match the newer section you can see in the pic (right side). Approx 2m2. I will supply pavers and edging - just tell me what I need to order. If you need any other materials, you will need to supply these. You will need to tidy up afterwards.

Needing 3 pieces of stone to be re mortared to steps - see photo. Would need worker to bring mortar

Have tried paving sand. Car drives over it so probably needs cemet to lock these 6 pavers down

Re-pave the areas that previously had a water feature which was removed, and ensure a seamless transition/joining between the existing paving and the new paved area. Some existing pavers are cracked and need replacing. Area may need new levelling as required. The only new paved section needs to be underneath the covered area under the pergola. I will pay for any pavers extra which are needed but I do have several spare.

Repair moved and sunken paving. Approx 13m2 of walk path paving. Approx 16m2 of drive way paving. Lift existing paving. Prepare and compact road base. Screeding sand, relay existing pavers. Finish compacting pavers with joint filling sand and applying a concrete edge restraint.

Scope of Works • Excavate and remove existing 75mm pipe. • Supply and relay approximately 6.2 metres of 75mm pipe, including all necessary joiners (supplied). • Excavate to a depth of 100mm below existing paved surface to ensure new pipe is laid beneath paving height. • As per provided photos, excavate and remove approximately 0.5 tonnes of soil as required. • Prepare paving base by laying and compacting rubble and paving sand (both supplied). • Install approximately 15m² of brick paving to match and tie in with the two existing paved areas. • Pavers used will be old red brick (supplied). • Backfill, compact and clean site upon completion.

Hello We need our outdoor pavers pressure washed. I am keen to ensure our garden isn’t damaged in the process.