Find a professional hot water system contractor in Outer East Melbourne
Fill in a short form and get free quotes for local hot water system contractors in Outer East Melbourne
Excellent rating - 4.3/5 (10900+ reviews)
Looking for hot water system contractors?
- Gas system
- Electric systems
- Boilers
- … or anything else
Best rated hot water system installers near me
Latest Review
"Nice and easy. Got my job done !"
Verified Badges
ID Verified
Mobile Verified
Latest Review
"Helpful and quick thanks"
Verified Badges
ID Verified
VIC Plumbing Licence
VIC Electrical Licence
VIC Gasfitting Licence
Mobile Verified
Latest Review
"Great experience with Isaak. Went above and beyond!"
Verified Badges
ID Verified
Mobile Verified
Latest Review
"Brenton is star ⭐️ Plumber extraordinaire "
Verified Badges
ID Verified
Mobile Verified
Latest Review
"Arrived on time. So very helpful and had some parts to get the job done first time. Very appreciated. "
Verified Badges
ID Verified
Mobile Verified
Latest Review
"Very good guy, punctual, efficient and quick "
Verified Badges
ID Verified
Mobile Verified
Latest Review
"Very knowledgeable, very reliable, and very helpful. Did a great job and fixed the issue with no problems. Highly reco..."
Verified Badges
ID Verified
Mobile Verified
Latest Review
"Channa was very quick and professional, fixed the issue very promptly "
Verified Badges
ID Verified
Mobile Verified
Recent Hot Water System Installation & Repair reviews in Outer East Melbourne
Jye was a reliable and honest supplier. Heckled the issue and even though was not the repair required offered advise and feedback. Would use him again for other jobs.
Vulcan hot water tank require servicing
$150
Jye attended to my job request immediately, great & professional service provided. Will definitely hire him again in the future. Thanks mate!
Hot Water Unit PRV replacement by Licensed Plumber
$120
Great job, highly recommended!! Thanks mate
Can’t ignite hot water system
$150
Very professional service. Thanks Craig highly recommended 👍
Replacement of pressure release valve - hot water
$150
Fast, friendly and completed task. Highly recommended.
Plumber for leaking hot water system
$150
Great workmanship, Craig is easy to communicate and agreed work so quickly. Highly recommend his services.
Fix AquaMax Gas hot water leaking issue
$100
What's the average cost of a hot water system installer in Outer East Melbourne
$126 - $250
low
$126
median
$182
high
$250
Average reviews for Hot Water System Installation & Repair Services in Outer East Melbourne
based on 48 reviews
4.92
What is Airtasker?
Post your task
Tell us what you need, it's FREE to post.
Review offers
Get offers from trusted Taskers and view profiles.
Get it done
Choose the right person for your task and get it done.
- Get it done now. Pay later.
- Repay in 4 fortnightly instalments
- No interest
- Available on payments up to $1,500
66+
Tasks successfully completed
3
Average amount of offers per task
6
mins
Average time to receive offers
Statistics from the most recent tasks on Airtasker over the last 4 years.
Related Services near me
Related Locations
Top Locations
Sunshine Coast Hot Water System Installation & Repair
Adelaide Hot Water System Installation & Repair
Perth Hot Water System Installation & Repair
Hobart Hot Water System Installation & Repair
Central Coast Hot Water System Installation & Repair
Newcastle Hot Water System Installation & Repair
Sydney Hot Water System Installation & Repair
Parramatta Hot Water System Installation & Repair
Ballarat Hot Water System Installation & Repair
Geelong Hot Water System Installation & Repair
Melbourne Hot Water System Installation & Repair
Canberra Hot Water System Installation & Repair
Brisbane Hot Water System Installation & Repair
Gold Coast Hot Water System Installation & Repair
8 Ways to earn money as a plumber
Read more
What do hot water system installation services include?
Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.
Inspecting installation area
Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service.
Preparing for installation
Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.
When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.
Installing the cylinder
Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.
Installing components and pipes
After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices.
Testing the system
Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes.
They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.
Recent Hot Water System Installation & Repair tasks in Outer East Melbourne
I need a plumber to install hot water pipe 15 meter
$285
Donvale VIC 3111, Australia
21st Aug 2025
i need a plumber to install hot water pipe 15 meter
Check Hot water Issue
$50
Vermont VIC, Australia
14th Aug 2025
Newly purchased house. Hot water system in Aatic and pressure is too low both in kitchenand bathroom. Mixers across the house not working. Need help to investigate the issue
Stuck shower head with limited hot water coming out
$100
Mitcham VIC, Australia
6th Aug 2025
Stucked shower head with no hot water coming out
Plumber hot water leak
$100
Rowville VIC, Australia
20th Jul 2025
We have a small hot water leak.
Hot water shower tap needs fixing.
$50
Mitcham VIC, Australia
19th Jul 2025
Hot water shower tap in ensuite needs fixing, cold water tap runs fine. Have a new wall top tap if required to install.
Insightful and able to identify issue.
Hot water service not lighting need assistance
$120
Ringwood VIC, Australia
17th Jul 2025
Hi, I need someone to come out and get the hot water service working at my property. When the property was inspected before purchase, the hot water was working fine. At the pre-settlement inspection, the gas was turned off at the meter, so the oven, cooktop, and hot water weren’t working. Today we turned the gas back on, and while the oven and cooktop are now working, we couldn’t get the hot water service to light despite multiple attempts. Looking for someone experienced with hot water systems to come and take a look and get it working.
Very reliable and knowledgeable
Leaking Relief Valve on Hot Water Unit
$100
Ferntree Gully VIC 3156, Australia
9th Jul 2025
Hi guys The relieve valve on my hot water Unit is leaking quite a bit. Probably needs an asap fix due to me loosing alot of water.
Hot water heater copper pipe leaking
$80
Nunawading VIC 3131, Australia
6th Jul 2025
Hot water pipe pinhole leak
Hot water system issue
$100
Boronia VIC 3155, Australia
28th Jun 2025
Hot water system making a whistling sound
Plumber to disconnect sink and hot water unit
$100
Lilydale VIC, Australia
15th Jun 2025
Hey guys I need a Plumber to disconnect/cap off from wall sink and hot water unit. Check photos Asap as the whole cabinets needs to be removed.
One of the best plumbers you could use for any kind of plumbing jobs
Replace Leaking Copper Pipe on Gas Hot Water System
$65
Rowville VIC, Australia
26th May 2025
Looking for a licensed plumber to replace a section of copper pipe on my gas hot water unit. There’s a small hole in the pipe that’s causing a leak, and it needs to be replaced to stop water loss and ensure the system works properly. Details: 1) Pipe is accessible 2) Located externally 3) Licensed and experienced plumber 4) Please bring your own tools and materials
Replace a Hot Water Pressure and Temperature Relief Valve
$120
Donvale VIC, Australia
10th May 2025
The hot water unit is dripping non-stop, I have released the pressure tap and flushed it out but it keeps dripping. Reading the notes on the unit it says that the PRESSURE AND TEMPERATURE RELIEF VALVE could need replacing.
Efficient and reliable.
No hot water even no water when hot faucet switched on.
$150
Ringwood VIC, Australia
3rd Apr 2025
Hi, I live in Ringwood Melbourne. I haven't used hot water for few weeks, now no hot water came out (even no water)when I switched faucet to hot side My cold water pressure is normal.Anyone can fix this?
Good service, highly recommended.
Fix tiny home water pressure and Install kings hot water system
$500
Steels Creek VIC, Australia
2nd Apr 2025
I have a tiny home and would like someone with plumbing experience to help fix my tap water pressure from my 12v pump (I can't seem to get it at a constant flow rate..thinking there may be an air bubble in the line) and also install a kings gas outdoor shower system for guests to use
Replacing the electric hot water system thermostat
$200
Ringwood North VIC 3134, Australia
20th Mar 2025
Replacing thermostat for hot water tank
Plumber Required – Hot Water System Maintenance & Blocked Shower
$100
Ferntree Gully VIC 3156, Australia
2nd Mar 2025
Hi, I’m looking for a qualified plumber to perform regular maintenance on a gas-boosted hot water system. Lately, the hot water has been running out mid-shower, so I’d like to get it checked and serviced. Also when onsite to check shower upstairs - slightly blocked presently Photos will be uploaded shortly. Cheers!
Probably the best tradie I've ever met. Friendly, quick to respond and gave a lot of helpful tips, from hot water, blocked drain and rainwater tank. Cheers
Restart Aquamax hot water system
$20
Lysterfield VIC, Australia
11th Feb 2025
my Aquamax hot water system went off due to strong wind. need to restart it.
My shower head is not working for hot water and bad water pressure
$150
Rowville VIC, Australia
6th Feb 2025
My shower head is getting low pressure and no more hot water. I think I need a new shower head.
Hot water boiler or pipe leaking
$130
Bayswater North VIC 3153, Australia
3rd Feb 2025
There is water leaking from the gas storage or underneath I don't know. Need someone to attend and have a look and fix of possible.
Thank you for your punctuality and advice. Looking forward to working with you again.
Install customer supplied hot water system
$250
Scoresby VIC, Australia
29th Jan 2025
I am a plumber myself I just need a plumber to install 135L storage hot water system, I’ve ordered the materials already just need swapped and changed valves.