Find a professional gate installation in South Brisbane

I would like a handyperson to replace a hinge on a gate. The top hinge is broken. Please also supply hinge. The gate is also a tight fit, so would also like the person to sand a bit off the gate side so it fits better. When making an offer, please say when you could do the work.

Hi, Just after a 50mm aluminium gate frame. 1200 x 963 with stop. Powdercoated white

Gate is already in position. Just need somebody to install the sliding gate motor and racking on gate and program gate motor will be supplied Centsys D3

The automatic sliding gate needs maintenance. it has problem with opening.

Reprogram a Dace Ultima electric gate system as the gate is not opening. The message was saying ‘the IR beam is blocked’ but this has been cleared, however it’s still not opening so would like a professional to check it. Also, check if gate is set up correctly as the support bracket makes a big noise when it’s opening.

Need a rotted out post re attached to wood fence (or replaced if need be). Gate also needs fixing - latch & hinges. Bunnings is very close if anything additional is required.

Gate to the Fence needs to be rehung to open outwards instead of inwards to the pool area ( for non-compliance). Needs to also close and lock into the pool safety latch by itself

Bought new home. Building and Pest advised of high damp reading in bathroom. Need this investigated and rectified.

There is a little bit of subsidence causing gate to rub against the rail, at times causing the gate to stop/jam. Need a higher rolling wheel or maybe spacers to lift the bottom height of the gate. With that, minor adjustment needed on the Nylon gear rack.

Need this gate replaced, dimensions 1.40m wide by 1.80m high. Thanks

Existing “Nice” gate motor for driveway gate. Only moves the gate an inch or two.

Hi, We need to replace the top lock on our gate to something more sturdy as the bottom lock sometimes fills up with dirt and the dogs are able to push out of the gate. We are thinking the same lock on the bottom gate but positioned sideways? Open to ideas. This gate is the only entrance into the house - the lock needs to be accessible to open from the outside which is why my thoughts is to do the same lock at the bottom but sideways

I am looking for a professional to install three indoor baby safety gates in my home. Availability is needed anytime during the day from Wednesday onward. Please let me know if someone is available.

Hi guys , I need someone to help me install sliding gate and side gate . I have got all the materials . Only need an install

Need someone to have a look at a leak coming from the bathroom under the floor into the bedroom. See picture, shower is behind that wall

Remove an 2 x old hinge with 1-2 rusty screws and help screw in the new hinges. I am happy to assist if needed

I need assistance nailing a small sign on the opposite side of the neighbouring gate. I have nails, etc, but I need help due to my disability.

Install an automatic gate opener. Lockmaster single swing

Both posts require replacing. Preferably steel/metal posts but open to suggestion. Existing gate to be re-hung. One (or more) hinges need replacing. One post is in ground, other post is in cement. Gate is quite heavy. Open to quotes on a sliding (not motorised) gate. But would prefer quote to fix existing gate. Budget negotiable depending on options.

Move already made wooden fence gate to another part of the fence and replace hole