Find experienced local fencing contractors in South Adelaide

Garden gate dropped a bit on one side and making it difficult to open and close

I’m looking for someone to build a garden fence (just the wooden part), similar to the one shown in the attached picture. The fence will have 3 sides, and the measurements 6M each. Will supply all the materials required

Looking for a fence installer to do my garden's fencing. I want the fence height around 1 - 1.2m. I also need some advice on if I should only do one side (around 10.5 meters)'s fence or two sides (around 10.5m x 7m) etc. etc. Material requirement: aluminum slat. Thank you.

To be installed already purchased garden gate, the existing fence posts are solid, the gap between the posts is 840cm, the gate is 900cm w an A1 protector aluminum flat top pool gate. I'm hoping to retain the existing post and mount the gate on the outside of the posts. I can purchase the hinges and D-latch you recommend or if you can provide.

Needing someone to install a gate separating our garden from the front gate on a good neighbour fence to keep the dogs out. Unsure on what Is a reasonable price. - Due date: Flexible

Hi. We are needing someone to Install fence screening for our backyard. Open to offers.

Hi! We need help to replace our garden picket fence. It is: 1220mm (H) x 3000mm (W) with one gate in the middle. Approx 3-4 posts will need to be replaced. We would like the replacement to be similar to the existing fence. - Due date: Flexible

it'll be two sides as the other two side are my house. One side to be 6.4 meters in length and the other side to be 7.4 meters in length. They hight of it should be 4 foot - ish. One side must have a gate. - Due date: Before Monday, 19 February 2024

A fence that can keep a small dog in (spoodle, will grow to be 40cm heigh and 7-10kg). He has just jumped out of a 80cm heigh temporary fence i have currently, so will need to be 1.2-1.5m heigh, very stable and have a gate. Ideally i would like it to be black and see through but open to solid forms if it will keep him in my small back yard area. - Due date: Flexible

HI, existing fence that we want to extend. Current fence has horizontal colorbound panels. Want to finish it, extra 13m that i have calculate as extra 5 panels and relocating one current panel and fence. Happy to get quotes of the materials and installation or only installation Thanks - Due date: Flexible

Exchange collapsing wooden ones with iron. Approx 3 to 4 panels. - Due date: Needs to be done on Monday, 21 March 2022

We need a lockable gate installed into a colourbond fence. Photos included here but please ask any questions you may have in order to quote.

Need to get side gate secure and done.

Two colourbond fence panels need to be removed. The fence post between the two panels has come loose and is very wobbly so it needs to be removed (likely replaced?) and reconcreted into the ground. Then the two panels need to be put back in. Some digging and tricky access is required for the fence post concreting.

I have 2 (2.4m x 1.8m) colorbond fence panels that are leaning over and require new posts to secure it alongside existing footings if possible

Fence bent in and split between the post. 1.8m colour bond fence. 4 posts need reinforcing

Color bond fence, with concrete sleepers at base and no post support is wobbling at one joint of two panels.

Tree damaged fence. Approximately 8 panels and capping and some posts need replacing

Provide quote for removing current fencing and providing/installing approx 10m of new colorbond fencing.

About 50m good neighbors colorbond fence needed including retaining walls.

Supply and install a colourbond side gate about 900 wide and 1.8m high with latch

Approx 12 metres of Colorbond post and rail fencing 1.8 metres high

Hi. I need a cream colorbond side gate supply and installed. Currently timber gate in place. Hinges side will be a brick wall and need to install a post next to the fence to latch the gate. Pavers on the ground. Height is 180cm Width is 110cm from fence to the wall.

Install side gate (colourbond infill and gate)

Needs to Put Colourbond fencing and slate fencing

5.4m length of brush fence to be replaced. Materials can be provided. Happy to negotiate.

About 3m of colorbond fence that was taken down and needs to be re erected in a different place in my front yard. Fence and posts I already have on site ready for installation. Only materials required should be a bag of concrete to secure posts? Small job For skilled handyman or ex builder? Maybe 2-3hours work?

Good neighbour fence (1.8m tall, not including concrete sleepers - same height as neighbours existing back fence) Under fence concrete sleepers (grey or charcoal) Woodland grey / Slate Grey Classic corrugated profile 50mm (or similar) posts between side channels (preferably powder coated to match fence) Post and side channel lengths sufficient to allow for concrete plinths Total fence length 15.42m I will remove the junk behind the shed, but plan on keeping the lime tree espalier agaist the fence.

Colorbond fence extension and new fence in front

Woodland Grey colorbond gate installed between house and fence. Ideally as wide a gate for access as possible. 1850mm between wall and fence. Quote to include material cost and purchased by installer. Not sure how much it will cost so happy to negotiate.

Fence is currently leaning inwards and needs to be straightened