Find experienced local fencing contractors in Roseville

One glass fence panel was dropped and broken. Need help to source and install 1 glass fence panel. The panel size is 1215*825*10mm I have 2 replacement glass clamps but lacking the bolts to secure them to the poles. Unable to reuse original bolts cause they are stuck on the old clmaps. Also, one of the screw socket on the pole seem loosen, which rotates freely.

Need someone to change part of the fence to a gate

Hi, I am looking for an experienced handyman or fencing contractor to inspect and reinforce an external fence / guardrail at a residential property. The railing/fence is located outside near a retaining wall and appears to be loose or not secure enough. There is a safety concern that a child could potentially climb, lean on it, or fall from the area if the railing is not properly secured. Please see the attached photos for reference. Job required: 1.Attend the property and inspect the current fence / railing condition 2.Check whether the posts, brackets, fixings, or frame need reinforcement 3.Secure and strengthen the railing/fence as required 4.Advise if any replacement parts or additional materials are needed 5.Make the area safe and stable Please provide your availability, call-out fee if any, and an estimate for labour/materials. Access will need to be arranged with the tenant.

Pool fence gate post is wobbly and pool gate is not automatically locking

The timber fence in my backyard is leaning and needs to be straightened and reinforced to prevent collapse. Please inspect and suggest if any posts need to be replaced. Property located in 20 Carnarvon Road, Roseville NSW 2069. Budget $800 – negotiable depending on the scope.

Need help installing an 8 panel glass Pool fence along the top of the wood retaining wall. Replacing the temporary fence in the photo. Fence is supplied and secured by spigots to concrete footings (supplied) Installation is digging wholes and pouring concrete for 16 spigots and placing glass on top. See photos for details

Need to have an old garden pedestrian gate taken down and install another one ( timber gate). The bottom screw of the metal post that the gate was fixed on has come out of the brick wall and needs to be fixed onto the bricks again. Then install this timber gate which is the same size as the old one. 1meter by 1.48 meter. Install a simple lock on the timber gate too. Yes, I have the new gate already.

We need temporary building dust fencing for approximately 1 week . It will be approx 8m in length

Remover existing 26 metre shared fence between 2 battle ax properties and replace with new fencing.

Want to build a wooden gate and fence that spans about 3.5 meters between house and boundary fence (about 1m wide gate and 2.5m length of fence). The gate should be offset to the left/house side, and then fenced up to the boundary. I want the slates (85mm spotted gum to match existing decking with about 3mm of spacing) to run horizontally. Yet to decide on the height of the gate, but thinking between 1m-1.8m high. See attached photo where I've installed a temporary gate. Quote should include materials and labor.

Hi. Three of the glass panels plus a gate of my pool fence have come out of the decking boards and are leaning. The glass hasn't broken. Am needing these to be secured back in place. Thanks

16m of fence line 1.2m top and bottom rail, sleeper as bottom rail, mesh infill. I can do mesh infill and or painting if required. Old wire fence need to be removed also

Need help installing gates on brick fence. Fence panels will be aluminium fence panels and attachment equipment. Including 2 x swing gate opening kits. Need tools and also may need to cut the panels to size.

The column of the fence has broken and needed to be replaced.

Re-position three pieces of glass pool fence and a pool gate, remove one glass panel and carry to a save place in the house. - Due date: Needs to be done on Saturday, 9 December 2023

You will be helping my fencing contractors with demo of old fence and also the build of fence. also looking for workers over the christmas period, having a ute would be a plus. - Due date: Needs to be done on Friday, 8 December 2023

The main gate is about 2.8m wide, and the small gate is about 95cm wide. The fence is 1.2m high. Just wanted to have gate installed, wooden or metal do not matter. - Due date: Before Saturday, 9 December 2023

put up a front fence and driveway gate - Due date: Flexible

Hi, I need someone to install a vertical garden on a wooden fence. screw 4 small panels in the fence, pls quote with the irrigation system to be installed. (i can provide pipes) and/or without. Product is Atlantis grow wall slim - Due date: Before Friday, 29 September 2023

We have all the posts and the clothesline parts. We have the quick dry cement and the post digger. I need the labour and the handy person smarts - Due date: Flexible