Find experienced local fencing contractors in Gymea Bay

I need a chainwire fence to be installed for one of my clients. It’s on the back of the property with easy access. Black PVC Coated Chainwire fence with pedestrian gate 1200mm wide. Allowance made for the following: • 50mm NB Powder Coated Galvanised Steel Corner/Gate posts • 32mm NB Powder Coated Galvanised Steel intermediate posts. • Panels to have 25mm NB Powder Coated Galvanised Steel top rails with mid and bottom Black PVC coated tension wires. • Single Pedestrian gate with hinge posts set 1200mm wide • Rails attached to intermediate posts with adjustable Rail T’s (x7) and Corner/End posts with Post and Rail Clamps. • Posts to be set in individual concrete footings. There might be some sandstone rocks underground. Please see a sketch attached.

Needing two separate fences with gates installed at our home. Gates are on Decking which has been covered with synthetic grass. Would like this in white if possible and something similar to the picture attached. Open to other ideas if you have anything else in stock. Roughly hip height no higher. Looking to have this done in the next few days. Do not mind if the fencing and gate is second hand if in good condition

Would like to move our existing colour bond gate and posts on the driveway down further so we can fit another car infront of the gates. Would like gates moved inline with the Pipe on the side of the house in the photo below.

We require a Colourbond fence to be installed to separate two properties. Approximately 22m in fencing plus 2 x gates required. Surfmist 1800 high - can source materials ourselves if required. Some posts into cement, others into dirt. Unfortunately we have a curved section - hoping to break that area into 3 sections so it fits with the concrete. Urgent job as we have Grandma moving in Monday with a small puppy. Price negotiable - just had to get this up! Thank you 😊 - Due date: Before Monday, 20 November 2023

The wooden balcony fence is rotten in parts and needs replacing - Due date: Flexible

requesting a quote regarding the installment of a colorbond fence of 24mtrs? Cheers

I just purchased a new house and the pool gate is non compliant. I already have a non-compliance report attached. I need someone to come out and repair the gate and issue a new compliance certificate. For those interested, non-compliance report attached. I need a price for install + certification. I'll get material if someone tells me what we need. Can we reuse the existing fence? - Due date: Needs to be done on Thursday, 1 December 2022

Construct new timber fence About 23m length 2m high sloping to 1.2 Easy access - Due date: Flexible

Taller panels required to meet boundary pool fence requirements. A couple of sloping panels - Due date: Before Friday, 9 September 2022

Snall section of paling fence is leaning, needs stabilising - Due date: Flexible

Install a compliant pool fence in Gymea Bay. Fencing material will be provided (12 panels x 2.45m + posts + brackets) and 1 x 0.975 gate with latch and post. As per pictures there is approximately 28 metres of fencing required around the pool, a slight gradient, and needs to be connected to rear boundary fence. We are looking for experienced professionals, familiar with compliance regulations. - Due date: Needs to be done on Friday, 4th Mar 2022

A fence has fallen due to a land build up on the neighbours side of the fence. Need quotes to remove the land build up and prop the fence back up. Will need the quote in writing via an email once quoted so neighbour can approve paying for half of the cost.

Install a letter box post in the ground with concrete. The hole is already dug.

Indoor dog gate (timber) - 98cm opening. Will need support posts into gyprock wall with a latch!

We would like 9 metres of standard picket timber fence and 3.45 metre gate in same material. Gymea bay

1.8 mesh, 2.4 star pickets, pegs, tie wire and standard post driver. That’s all the materials. I need 8m on one side and about 18m on the other side with a gap of 1m. The mesh need to be well tightened and firm. If you think you can do it please let me know otherwise don’t comment please. Thanks

Hi everyone I need to put up a fence in te backyard it split in 2 sides, one is about 8m and the other about 18m. I have all the material, mesh, star pickets, post driver, pegs, tie wire. It will be one picket every 1.5/1m pretty straight forward easy job. Please don’t comment if you don’t know how to do it or done it before. I need it ASAP Thanks

Hi, I need to put up a mesh fence including 8m on one side, 1m mesh gate, and 18m on the other side. It will be with star pickets down at list 700mm, every 1.5/1’m and pegs at the bottom, wire tire to tighten up the mesh. I need it by Thursday I have all the materials. Do you think you can do it? Thanks

I need to put up a mesh fence at the backyard. It’s about 27m (about8m on one side and about 18m the other side) with a gap in between of about 1m for a mesh gate. I’ve got about 30m of mesh 1.8 high and 13 star pickets 2.4m high, 1 mesh gate 1.8m high and tie wire. Probably need a post picket. I need it next week Wednesday/Thursday if possible. Attached are photos of materials and backyard both sides and gate position. Thanks

Install 900mm x 1m wooden gate. I will Purchase items from Bunnings. Need someone to build and installed as per photos