Find experienced local fencing contractors in Blacktown

Fix my fence it got came off because of heavy wind

Remove the bamboo screen along the fence

Retaining walls Boundary fence Re organise gardening - Due date: Flexible

'designerplants.com.au' 10 1*1m fake garden wall to be attached to fence divider by screwing vertical spacers at 30cm (spacers supplied) to the fence, then screwing the plant to the spacers. Wall is 5.2 wide by 1.8. Cutting of plant may be required Timber and SS screws supplied but no saw or drill is available (BYO) - Due date: Before Thursday, 20 April 2023

Need a handy man to help erect 9 garden posts over a vegetable patch, a mesh trellis above the posts, and wiring around the posts to support the climbers. We have the posts and the wires and basic garden tools. - Due date: Flexible

Need 1 metre wide timber gate installed in side path - Due date: Flexible

Looking for someone to install 4 screen panels at the corner of my back yard. Please see photos. Panels are 1800mm by 900mm. Quotes are welcomed. When quote, please also let me know how you going to (methods) install the panels. I have already got the panels, but you will need to supply the rest of materials needed for installation. - Due date: Flexible

There is a need to installed Pool Fence and Three gates. The two gates are to be installed on each side of the house and the fence will be either 6-8 meters or 16 -20 meters in the backyard to restrict the access of the puppy going to into the garden area. Work needs to be done on a priority basis. We or you can will buy the material from bunning including, Posts, fence, gates etc & cement bags. Material costs will be paid at actuals. Your role is to come up with the right tools and install the fence and gates. Pls provide quotes. We are looking for quotes URGENTLY from someone with experience in installing gates and fences. Thank you. Best Regards - Due date: Flexible

There is a need to installed Pool Fence and two gates. The two gates are to be installed on each side of the house and fence nearly 16 -20 meters in the backyard to restrict the access of the puppy going to into the garden area. Work needs to done on a priority basis. We will buy the material from bunning including, Posts, fence, gates etc & cement bags. Your role is to come with right tools and install the fence and gates. I expect that work can be done in half a day. Pls provide quotes - Due date: Flexible

Dear AirTasker, Need immediate help in installing one single aluminium screen with frame over existing colour bond fence to give a fresh look. Kindly give a quote and I want to get it done on or before Saturday … fence and aluminium screen sample attached for reference…: any queries let me know

Put in a new side access gate, colourbond or picket/aluminium - Due date: Needs to be done on Friday, 28th Jan 2022

I would like to ask for a quotation to replace the fencing that I have encircled to the one exactly like the stairs. The fencing that needs to be replaced is 3220 metre in length please.

the hinges have come off on the garden gate. The gate itself is ok.

Hi my dogs have dug under my colorbond fence and escaped I'm needing help to block it off so they can't get out please

Hello, I need a dog enclosure built for my dog to run in. I have the fencing material

There is a school fence along my backyard and I want chicken wire (that I have) attached to the fence with cable ties (which I have) - then cover the chicken wire with some used shade cloth that I have - this is to prevent a small dog from exiting nor seeing out of the yard into the school behind me.

Need a quote done for pool fence & Install. For council certificate.

Need someone to concrete the marked area and match the driveway colour Approximately 2m , 2m, 2.7m Triangle shape

I need a relatively tall gate (about 1.5 meters tall) for my backyard on 2 sides to prevent my dog from escaping. The gates cannot be drilled as this property is a rental, so it must be removable. The attached photos show the backyard. The gates can be installed on the actual sides of the backyard to enable more room. (I have photos of the sides if needed, won’t let me upload)

We have 6 damaged panels need replacing Thank you

Side entrance gate needs to be relocated. It's a color bond gate. Bolted not cemented. - Due date: Flexible

Previous fencing installer did not do a nice job he put the colourbond fence with new sleeper beside an old sleeper instead of replacing the old sleeper and installing the fence on it. Now wanting to fix it to replace the old sleeper with new one and relocate the fence on it.

I have a digger who’s started to dig at the fence line. Approx 20m in diameter needs proofing. Unsure of approach or cost so make an offer! We are open to quick fixes or even landscaping options.

Is there any one out there with knowledge & ability to look at ‘petsafe’ invisible dog fence which has started not working.. not sure if unit needs replacing.

The back of the house is raised off the ground and I need wire netting or lattice installed to prevent a dog from being able to get under the house. - Due date: Before Saturday, 11th Dec 2021

Looking for someone in Quakers hill or surrounding areas to cut my dogs nail.

Need a competent labourer to assist with rebuilding a Colorbond fence. Includes replacing the panels and rails and adding extensions as well as building a couple of additional panels and one gate. Today and possibly tomorrow (Saturday). Please let me know your hourly rate.

Need a competent labourer to assist with rebuilding a Colorbond fence. Includes replacing the panels and rails and adding extensions as well as building a couple of additional panels and one gate. Atleast one full day. Friday and possibly Saturday. Please let me know your hourly rate.

Might need to come have a look for a quote but area is about 5 metres long

Need infill sheet replaced for colorbond gate. 2.8m W x 1.8m H. Install drop bolt, safety latch keyed lock. Gate to be raised by 50-60mm while refixing. End posts, stiles, frames etc are all reusable.

We have a shared fence that I’d like to get replaced with a colorbond fence with privacy screens or 2 sleeper blocks. It’s about 16.3M in length

We have a shared fence that I’d like to get replaced with a colorbond fence with privacy screens or 2 sleeper blocks. It’s about 16.3M in length. We will need you to supply and install

Colour bond fencing- move exisiting fence’s position and add new fence

Supply and install new colorbond fence Length: 16.7 m Height: 1.8 m + sleeper/s Colour: woodland grey Style: new style Supply and install 2 x colorbond gates. Length: 0.9 m Height: 1.8 m Colour: woodland grey boundary colorbond fence Supply and install new colorbond fence Length: 3 m Height: 1.8 m Colour: woodland grey

Install stone fence post and colorbond fencing

To install an extension to existing colorbond fence (attached photo), 3 panels. The extension height is 60cm. Easy access to the fence.

I need to install 2 panels of colorbond fence extension. I also need to get perspex sheet screwed on these 2 extension. If you see the pic i have attached, there is already colorbond fence extension , this extension part need to have Perspex sheet screwed to it to cover the gap it has. Additionally 2 more extension panel need to be fixed to extend the fence height at the each side of the fence.

3m colorbond fence with access gate on driveway Replace 1m colorbond fend to colorbond gate on the other side Remove two colorbond gates inside

Colorbond fence height extension needed. Total 5 standard panel (2.35m X 0.3).

The boundary fence is a "standard 6foot" colourbond fence. Because a tree has been removed, one or two posts are now falling over. I need 2 or 3 panels dismantled, 1 or 2 posts removed from the ground and reinstalled with new concrete, and the panels put back together. The only new materials required should be: Concrete, Maybe some screws for the colourbond (if the existing ones can't be reused). If there is need to go beyond the 2 posts I am happy to have that discussion.

Need infill sheet replaced for colorbond gate. 2.8m W x 1.8m H. Install drop bolt, safety latch keyed lock. Gate to be raised by 50-60mm while refixing. End posts, stiles, frames etc are all reusable.

I need a gate installed in my fence on Terry Road, Box Hill. It must be lockable. The panel I want replaced with the gate is pictured. it is 1200mm wide and 1800mm high. The existing panel can be used to construct the gate if that is easier/cheaper. I'd like to understand options and costs.

New colorbond Fence supply and install (around 25m long) Old timber fencing removal Timber slippers to go underneath colorbond fence

I have a side alley which goes to my backyard. Need a colorbond gate in front before the garden area starts. It should be at a height where there is not too much gap between the roof and gate.

Need new colourbond fencing posts installed and the back fence height increased (to be the same as the side fence height) with a wooden retaining wall beneath it. Can re use the existing fencing panels. Please refer to the image attached.

ColorBond Fence Repair - panels need to be refixed